ET2 E31093-93PC Pipette 12 Inch 3-Light Pendant User Guide
- June 9, 2024
- ET2
Table of Contents
Contemporary
Lighting™
PRODUCT NAME: Pipette 12″ 3-Light Pendant
ITEM NUMBER:E31093-93PC
Please consult your electrician for hanging fixture and wiring.
Light Source : 3 x G9 LED 4W Bulb(Included)
Made in China
General Lighting (Including AC LED)
Before Getting Started
Read the instructions carefully prior to assembling the product.
When you open the package with a sharp tool like a cutter knife, be careful
not to damage the components inside.
Carefully remove all packaging materials and retain for future use.
Keep all hardware parts and packaging out of reach of small children.
Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product.
Ensure that you have all required contents for complete assembly.
Take care when lifting. Assemble the product in close proximity to where you
intend to position the item.
Do not over tighten the screws and bolts as this may damage the threads.
Do not let children play with this product.
Risk of suffocation!
Keep any packaging materials away from children.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the
product.
Caution there is a risk of shock. Disconnect from power source before
assembling or cleaning.
Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
Only use the recommended bulb type and do not exceed the maximum wattage as it
could cause fire.
Do not plug the product in if cord is torn or frayed.
Cleaning & Maintenance
On polished finishes, often using talc powder reduces the appearance of
fingerprints and other smudges.
For respective shade surfaces, use the appropriate cleansers, i.e. glass
cleaner, acrylic polish, and wood polish.
Clean with soft cloth and a mild detergent. DO not use abrasive cleaner.
Periodically (every 90 days) make sure that the screws are fully tightened.
Prolonged exposure to heat sources may cause glazing, melting and scorching,
or even cause color to fade.
Contents
Before getting, started, ensure the package contains the following components:
A
Fixture X1
B
Mounting Bracket X1
C
Anchor Bolts X6
D
G9 LED Bulb X3
E
Pins X6
F
Glass X3
G
Wire nuts X2
