ADT LS04 Smart Home Hub User Guide
- June 10, 2024
- ADT
Table of Contents
ADT LS04 Smart Home Hub
Product Information
The product is a v5 base set up guide for an ADT+ security system. The
guide is printed double-sided and folded into a tri-fold with a folded size of
4.125 x 4.125 in. The guide provides information on arm states, emergency
buttons, police, medical, fire, disarm, and system status.
Product Usage Instructions
-
Download the ADT+ app.
-
Create an account or log into an existing account.
-
Follow the in-app steps to connect your base 3 to Wi-Fi. Make sure Bluetooth is enabled on your smart device.
-
To use the system, refer to the arm states section of the guide:
- Arm Stay: Delays on, motion off. Use when people or pets are home.
- Arm Away: Delays on, motion on. Use when leaving home and no pets are home.
- Arm Night: Delays off, motion off. Use at night when home.
-
In case of emergency, press an emergency button and release.
Then press and hold the same button for 3 seconds to activate.
Dispatch requires paid monitoring. -
For police, medical, or fire emergencies, the siren sounds and dispatch occurs if enrolled in paid monitoring.
-
To disarm the system or check its status, use the Disarm + System Status button.
-
Use the Cancel button to cancel PIN entry.
-
For more detailed setup and troubleshooting information, refer to the complete owner’s manual at adt.com/help.
-
If you have additional questions or would like to speak to support about expanding your security system, call (888)
392-2039.
ADT Smart Home Hub Quick Start Guide
- Download the ADT + opp, create an account or log in to an existing account.
- Enter the activation code included with your kit.
- Follow the in-opp steps to power on the ADT Smart Home Hub and connect to Wi-Fi. Make sure Bluetooth is enabled on your smart device.
For more detailed setup and troubleshooting information, see the complete owner’s manual at www.adt.com/help/diy. If you have additional questions during setup, or would like to speak to support about expanding your security system, call us at 888-392-2039.
Placement tip
Place yaur ADT Smart Home Hub in a central lacatian within yaur heme with a strong Wi-Fi signal, and away fram any metal abjects and appliances that generate heat.
Operating specifications:
Wi-Fi connectivity at 2.4 GHz required.
Wi-Fi network secured with WPA/WPA 2 password.
Temperature: 32° ta 104° F (0° ta 40°C). Indoor use anly.
Power source:
AC power plug
AC power input: 100-240V – 50-60Hz
AC power output: 12V – 2A
Backup battery: built-in rechargeable lithium-ion battery pack (lasts up to 24
hours)
© 2022 ADT LLC dbo ADT Security Services. All rights reserved. ADT, the ADT
logo, (800) ADT-ASAP and the product/service names listed in this document ore
marks and/or registered marks. Unauthorized use is strictly prohibited. Third-
party marks are the property of their respective owners. License information
ovoiloble at www.ADT.com or by colling (800) ADT.ASAP. CA ACO7155, 974443,
PPO120288; FL EF0001121; LA F1639, F1640, F1643, F1654, F1655; MA 172C; NC
Licensed by the Alarm Systems Licensing Boord of the State of North Carolina,
7535P2, 7561P2, 7562P10, 7563P7, 7565P1, 7566P9, 7564P4;
NY 12000305615; PA 090797; MS 1501951. 21.03.226
Smart Home Hub Safety & regulatory information
Important safety information
-
Read and keep these instructions.
-
Heed all warnings.
-
Clean only with a dry cloth.
-
Set in accordance with the manufacturer’s
-
Do not place this device in a confined such bookcaæ or a similar unit without proper ventilation.
-
Do not set up near any heat sources such as radiators. heat registers. stoves or other d—ices (including amplifiers) that produce heat.
-
Do not expose the d+’ice to water (dripping or splashing). and no &ects filled with liquids. such as vags. shall be placed on the device-
-
use attachments/accessories specified by the manufacturer.
-
Dipoéng Of your device and Old battery: ADT is committed to environmental protection and
Attainability. We strongly encourage you to recycle your and old battery in accordance with Ixal waste and recycling laws. The de.’ice and battery cannot be dispoæd of with regular household waste.
Please viät www.cait2recyc1e.org and in the “Find o recycling location” field enter your ZIPCode to find your nearest battery recycling facility- -
use the AC adapter supplied With this device. not use a poorer supply from another device or another manufacturer. using ary other power cable or power supply m” cauæ damage to the device and void your warranty.
-
not defeat the safety purpose of the polarized plug. A polarized plug hos two blades with one wider than the other. If the provided plug does not fit into your outlet. consult an electrician for replacement Of the obsolete Outlet
-
Protect the cord from being walked on or pinched particularly at plugs, convenience receptacles and the point where it exits from the d«iæ-
-
Do not drop the decline or subject it to phyéæl shock.
-
Unplug this device during lightning storms or when unused for long periods.
-
not use high-voltage around this de€ice Electrical swatter) as this may malfunction due to electrical shock.
-
all servicing to qualified ærvice personnel if aer-supply cord or plug was damaged liquid was spilled on or objects fell into the device, the device was exposed to rain or moisture, doesn’t operate normally or was drop*d
-
WARNING: This product contains chemicals known to the State of California to cause cancer and congenital disabilities or other reproductive harm. Wash hands after handling.
Factory resetting your ADT Smart Home Hub
Hess and release the red reset button on the bottom of the ADT Smart Home Hub.
FCC STATEMENT
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does 03cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Base Quick Start Guide
- Download the ADT+ app.
- Create an account or log into an existing account.
- Follow the in-app steps to connect your base to Wi-Fi. Make sure Bluetooth is enabled on your smart device.
Note:
User can’t purchase any product in the market 100% compatible with our module. Even user completely duplicate one module, the product SW will not enable it if the authentication fails.
Label: Please open the bottom cover, and you can see it.
Operating specifications
Wi-Fi connectivity at 2.4 or 5 GHz required Wi-Fi network secured with
WPA/WPA 2 password
Temperature: 32° to 122°F (0° to 50°C) Indoor use only
Power source:
AC power plug
AC power input: 100-240V ~50-60Hz
DC power output 12V~1.5A
Backup battery: rechargeable lithium-ion battery pack (lasts up to 24 hours)
Arm States
Delays – Countdown for entry/exit. Motion – Alarm will sound if motion is
detected.
Arm Stay
Delays on, motion off.
Use when people or pets are home.
Arm Away
Delays on, motion on.
Use when leaving home and no pets are home.
Emergency
Press an emergency button,release, then press and hold same button for 3
seconds to activate. Dispatch requires paid monitoring
Police
Siren sounds. Dispatch occurs
if enrolled in paid monitoring
Medical
Siren sounds. Dispatch occurs
if enrolled in paid monitoring.
Fire
Siren sounds. Dispatch occurs
if enrolled in paid monitoring
Disarm +System Status
Indicates system is disarmed,has open sensors, or has errors
For more detailed setup and troubleshooting information, see the complete
owner’s manual at adt.com/help. If you have additional
questions or would like to speak to support about expanding your security
system,
call us at 888-392-2039.
© 2022 ADT LLC dba ADT Security Services. All rights reserved. ADT, the ADT
logo, (800) ADT-ASAP and the product/service names listed in this document are
marks and/or registered marks. Unauthorized use is strictly prohibited. Third-
party marks are the property of their respective owners.
License information available at ADT.com or by calling
(800) ADT-ASAP. CA ACO7155, 974443, PPO120288
FL EF0001121; LA F1639, F1640, F1643, F1654; MA 172C;
NC Licensed by the Alarm Systems Licensing Board of the State of North Carolina; 7535P2, 7561P2, 7561P2M, 7562P10, 7563P7, 7564P4 NY 12000305615; PA 090797; MS 15019511.
Questions?
Give us a call at 888-392-2039
or visit us at www.adt.com/help/diy
The complete owner’s manual can be found at:
www.adt.com/help/diy
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>