WATERPIK WP-563 Cordless Advanced Water Flosser User Guide
- June 17, 2024
- Waterpik
Table of Contents
waterflosser
QUICK START GUIDE
WP-560/562/563/564/565/566/569
Register your product and receive over $50 in savings.
waterpik.com/registration
Visit waterpik.com/vid560 to watch How To Video
Unit Prep
A. Charge unit for 4 hours by placing the magnetic charger on the front of the unit.
B. Insert tip until it clicks into place. To remove tip, push the tip eject button.
C. Lift the flip top on reservoir and fill with warm water. Refill as needed.
Water Floss
A. Press mode button to adjust pressure. Start on low pressure and increase to your liking.
B. Turn power ON. Close lips enough to prevent splashing.
Keep unit upright during use to ensure continuous water flow.
C. Aim water at the gumline at a 90 degree angle. Follow the gumline and pause briefly between teeth.
TO AVOID MESS: KEEP TIP INMOUTH WHILE UNIT IS ON.
This device is only compatible with voltages of 100-240 VAC, 50/60Hz
©2017 Water Pik, Inc
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>