ET2 E21374-BK Hover 30 Inch Wall Sconce User Guide
- June 9, 2024
- ET2
Table of Contents
E21374-BK Hover 30 Inch Wall Sconce
User Guide
Please consult your electrician for hanging fixture and wiring.
Light Source: LED Integrated 14W
Made in China
Before Getting Started
- Read the instructions carefully prior to assembling the product.
- When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain for future use.
- Keep all hardware parts and packaging out of reach of small children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all required contents for complete assembly.
- Take care when lifting. Assemble the product in close proximity to where you intend to position the item.
- Do not over tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
- Risk of suffocation!
Keep any packaging materials away from children.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the
product.
Caution there is a risk of shock. Disconnect from power source before
assembling or cleaning.
- WARNING: Wires need to be connected to driver found in canopy and should not be connected directly to power source or a short may occur.
Only use the recommended bulb type and do not exceed the maximum wattage as it
could cause fire.
Do not plug the product in if cord is torn or frayed.
Cleaning & Maintenance
- On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.
- For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
- Clean with soft cloth and a mild detergent. DO not use abrasive cleaner.
- Periodically (every 90 days) make sure that the screws are fully tightened.
- Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.
CONTENTS
Before getting, started, ensure the package contains the following components:
CRITICAL INSTRUCTION
Triac Dimmers
This fixture must be installed with compatible dimmer types only. Improper
wiring of fixture and/or use of incorrect dimmers will cause catastrophic
failure and void the warranty.
E21374-BK
SCHEMATIC FOR GENERAL REFERENCE ONLY
If fixture does not light reverse polarity.
FOR Optimal Use
Triac
For example,Lutron
DVCL-153P
DO NOT USE
IMPORTANT
Make sure that your dimmable LED fixture is paired with the correct dimmer
type
Must be installed by a licensed electrician with knowledge of electronic
lighting systems
© 2019 MAXIMGROUPCO
Documents / Resources
| ET2
E21374-BK Hover 30 Inch Wall
Sconce
[pdf] User Guide
E21374-BK Hover 30 Inch Wall Sconce, E21374-BK, Hover 30 Inch Wall Sconce,
Wall Sconce, Sconce
---|---