VIMAR 20450 Transponder Card Programmer Instruction Manual

: June 9, 2024
: VIMAR

Table of Contents

CHARACTERISTICS.
OPERATION.
INSTALLATION RULES.
CONFORMITY.
EXTERNAL VIEW
CONNECTIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EIKON 20450 IDEA 16920 ARKÉ 19450 PLANA 14450

Transponder card reader/programmer with vertical pocket in table mounting box. To be completed with cover plate.
The device enables programming and coding the transponder cards to use with the readers 20457, 19457, 16927, 14457 and the pockets 20453, 19453, 16923 and 14453 (in the respective colour variations). The reader/programmer must be connected to a personal computer on which the specific software must be installed for creating and managing the necessary data for the configuration of the cards according to the different requirements. The device is equipped with a cable for connecting the USB port of the PC and a backlit pocket for signalling card reading/writing. It is mounted on a tilted desktop box and needs no driver.

CHARACTERISTICS.

Power supply: from USB port (5 V d.c.).
Consumption: 130 mA.
Connection: USB 1.1 or higher cable for connection to PC.
Frequency range: 13,553-13,567 MHz
RF transmission power: < 60 dBμA/m
Operating temperature: -5 °C – +45 °C (inside).
This device contains only ES1 circuits that must be kept separate from circuits with dangerous voltage.

Note.
The device is supplied by the PC via the USB port; therefore, in the phase of sizing the system (number of necessary power supplies), you must not take account of the consumption of the device.

OPERATION.

Programming takes place by inserting the transponder card (that can be blank or already used previously) into the reader pocket after having selected the writing command with the PC software. If, 30 s after the command, no card is inserted into the pocket, the programming command is cancelled and the PC is sent a message telling it that the
device is awaiting data. The cards are read in a similar manner; the card is inserted into the pocket of the device that will read the saved data (codes, passwords, etc.) and will
transmit them to the PC.
The reader/programmer enables programming and/or reading the following data:
– “Codice impianto” (System code) (that identifies the installation or the name of the hotel or the site where the system is installed);
– “Password” (of the client or service);
– “Data” (Date) (day/month/year).

INSTALLATION RULES.

Installation should be carried out by qualified personnel in compliance with the current regulations regarding the installation of electrical equipment in the country where the products are installed.

CONFORMITY.

RED directive.
Standards EN 62368-1, EN 55035, EN 55032, EN 300 330, EN 301 489-3, EN 62479.
Vimar SpA declares that the radio equipment complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is on the product sheet available at the following Internet address:
www.vimar.com.
REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces of lead.

WEEE – Information for users
If the crossed-out bin symbol appears on the equipment or packaging, this means the product must not be included with other general waste at the end of its working life. The user must take the worn product to a sorted waste center, or return it to the retailer when purchasing a new one. Products for disposal can be consigned free of charge (without any new purchase obligation) to retailers with a sales area of at least 400 m² , if they measure less than 25 cm. An efficient sorted waste collection for the environmentally friendly disposal of the used device, or its subsequent recycling, helps avoid the potential negative effects on the environment and people’s health, and encourages the re-use and/or recycling of the construction materials.