Alecto DVM-201 Registering Camera User Manual

June 9, 2024
Alecto

DVM-201 Registering Camera
User Manual

REGISTERING CAMERA:

Alecto DVM 201 Registering Camera - REGISTERING CAMERA

  1. First remove the camera from its packaging, then connect the supplied power adaptor, insert it into a wall socket and turn on the camera.
  2. Now take the parent unit to pair the new camera
  3. open the setup menu
  4. select the option ‘Pair/Unpair CAM’
  5. open this item
  6. select ‘Pair CAM’
  7. confirm your choice
  8. select an available camera number
  9. confirm the instruction
  10. Keep this button (see the drawing below) depressed for several seconds until the power indicator on the additional camera starts flashing rapidly.
  11. After several seconds the image of the new camera will appear in the display of the parent unit.

The additional camera is now registered and is ready for use.

INFORMATION POWER ADAPTER:

Manufacturers name and address: Vtech Telecommunications LTD, 23/F., Tai Ping Industrical Centre, Block 1, 57 Ting Kok Road, Tai Po, Hong Kong.
Model Identifier: VT05EEU05100
Input voltage: 100-240VAC
Input AC frequency: 50/60 Hz
Output voltage: 5.0V DC
Output current: 1.0 A
Output Power: 5.0 W
Average active efficiency: 74.0 %
Efficiency at low 10% load: No load Power consumption: 0.07 W

SPECIFICATIONS:

Range:| up to 50 meters indoors
up to 300 meters outdoors
---|---
Parent unit power:| 3.7V Lithium Polymer battery model BL198555/BT298555
5VDC 1000mA power adapter (incl.), model VT05EEU05100
Baby unit power:| 6VDC 1000mA power adapter (incl.),
model: VT05EEU06100
Frequency:| 2400-2483,5 MHz
Modulation:|  FSK
RF power:| <20 dBm
Display:| 4.3” TFT LCD display WQVGA 480×272 pixel
Recharging time parent unit battery:| ~ 6 hours
Life-span parent unit battery:| 6~7 hours

Temperature sensor range:| 10°C – 35°C
Accuracy:| ± 2°C (at 25°C)
Storage temperature:| 0°C – 50°C

DECLARATION OF CONFORMITY
Hereby, Commaxx declares that the radio equipment type Alecto DVM-200 is in compliance with directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://DOC.hesdo.com/DVM-200-DOC.pdf. Use of this equipment is allowed in all countries of the EU. In France, Italy, Russia and Ukraine, only indoor use is allowed.

| WWW.ALECTO.NL
SERVICE@ALECTO.NL
Commaxx B.V., Wiebachstraat 37, 6466 NG Kerkrade, The Netherlands
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals