Alecto DVC166IP Surveillance Camera User Manual
- March 25, 2024
- Alecto
Table of Contents
User manual DVC166IP
Surveillance camera
OVERVIEW
- microphone
- light sensor
- infrared LED
- lens
- indication LED
- speaker
- LAN network connector
- reset button
- SD card slot
- inserting SD card
- QR-code
INSTALLATION
Connect the LAN network if necessary, or use WiFi.
Connect the AC adapter to the power socket (POWER) of the camera. Wait 2
minutes for the camera to starts up. Insert a micro SD card (required for
firmware updates).
Press the reset button with a paper clip until the indicator LED starts
flashing and the voice prompt is audible. Then the camera turns and voice
promt is audible again.
See Quick Starters Guide for registering the camera to the app.
MOTION DETECTION
Prevent false trigger.
- Reduce detection sensitivity.
- Keeping treetop, brushes and leafs away from the 3-meter diameter detection area.
- Remove small and swaying objects that may block the viewing area
DECLARATION OF CONFORMITY
Hereby, Commaxx declares that the radio equipment type Alecto DVC166IP is in
compliance with directive 2014/53/ EU. The full text of the EU declaration of
conformity is available at the following internet address:
http://DOC.hesdo.com/DVC166IP-DOC.pdf
Frequentie : 2407 – 2475 MHz
Maximum Vermogen : < 20 dBm
TECHNICAL SPECIFICATIONS
| Image Sensor | :CMOS Sensor |
|---|---|
| Display Resolution | :1080P (Full HD) |
| Lens | :4.1mm Glass Lens |
| Mini. Illumination | :0 Lux (With IR Illuminator) |
| Viewing Angle | :110º |
| Input Built-in | :microphone |
| Output Built-in | :speaker |
| Audio Compressioin | :PMC |
| Image Compression | :H.264 |
| Resolution | :1080P(1920×1080), 720P(1280 x 720), |
VGA(640 x 480)
Flip Mirror Images| :flip and mirror adjustable by user
Supported Protocol| :TCP/IP,UDP, HTTP, HTTPS, SMTP,
WPA/WPA2
Wireless Standard| :IEEE 802.11b/g/n,
Bluetooth 4.0 (For Wi-Fi Pairing Only)
Frequentie range| :WiFi(H20): 2412-2472 MHz
WiFi(H40): 2422-2462 MHz
Transmitted power| :WiFi 18 dBm EIRP
Date Rate 802.11b| :11Mbps (max), 80211g: 54Mbps (max.),
802.11n: 150Mbps (max.)
Wireless Securtiy| :AES128, WPA & WPA2 Encryption
Ethernet| :10/100Mbps
Pan/tilt Angle| :Hor 270° – Vert 90°
Infrared Light| :4 IR LEDs, Night visibility up to 8 meters
Alarm Input / Output| :Output, activated by hand
TF/SD card| :External up to 128 GB
(Kingston or Transcend)
Power Supply| :DC 5 V/1.5A (adapter)
:Kuanten, KT12W050150EU
Power adapter for indoor use only
Shen Zhen Kuanten limited.
The fourth industrial zone Park, Second Building Two Floor 201#, XiTian
Village, Gongming Town, GuangMing New Town, 518106 Shenzhen City, Guangdong,
People’s Republic of China.
Input voltage : 100-240Vac
Input frequency : 50/60Hz
Output voltage constant: 5V
Output current constant: 1,5A
Output power constant: 7,5W
Average active efficiency: 81.85%
Input power no load : 0.065W
Operate Temper. :-10°C ~ 50°C (14°F ~ 122°F)
Operating Humidity :20% ~ 85% non-condensing
Storage Temper. :-20°C ~ 60°C (-4°F ~ 140°F)
Operating Humidity :0% ~ 90% non-condensing
Certification :CE, FCC, RoHS
WWW.ALECTO.NL
SERVICE@ALECTO.NL
Commaxx B.V. Wiebachstraat 37
6466 NG Kerkrade, The Netherlands
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>