Alecto DVC-216IP Surveillance Camera User Manual
- October 30, 2023
- Alecto
Table of Contents
DVC-216IP Surveillance Camera
User Manual
OVERVIEW.
1. antenna
2. antenna connector
3. LED indicator
4. reset button
5. SD card slot
6. microphone
7. mounting base| 8. protection seal.
9. power supply connector
10. QR-code
11. LAN network connector
12. lens
13. PIR
14. Infrared LED
---|---
INSTALLATION.
Mount the antenna on the camera by rotating the foot on the camera. Connect
the LAN network if necessary, or use WiFi.
Connect the AC adapter to the power socket (POWER) of the camera. Wait 2
minutes for the camera to starts up. Open the seal so that the indicator LED,
SD card slot and reset button become visible.
Insert a micro SD card (required for firmware updates).
Press the reset button with a paper clip until the indicator LED
starts flashing. Flashing rhythm for registration:
See
Quick Starters Guide for registering the camera to the app.
MOTION DETECTION
- Reduce detection sensitivity.
- Keeping treetop, brushes and leafs away from the 3-meter diameter detection area.
- Remove small and swaying objects that may block the viewing area
DECLARATION OF CONFORMITY
Hereby, Commaxx declares that the radio equipment type Alecto DVC-216IP is in
compliance with directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
http://DOC.hesdo.com/DVC-216IP-DOC.pdf
Frequentie: 2407 – 2475 MHz
Maximum Vermogen: < 20 dBm
TECHNICAL SPECIFICATIONS.
| Image Sensor | :High Definition Color CMOS Sensor |
|---|---|
| Display Resolution | :1280 x 720 (1 Mega pixels) |
| Lens | :4.0mm Glass Lens |
| Mini. Illumination | :0 Lux (With IR Illuminator) |
| Viewing Angle | :90º Horizontal, 45º Vertical |
| Input Built-in | :microphone |
| Output Built-in | :- |
| Audio Compressioin | :PMC |
| Image Compression | :H.264 |
| Image Frame Rate | :15fps maxmium, downward adjustable |
| Resolution | :1080P(1920×1080), 720P(1280 x 720), VGA(640 x 480) |
| Flip Mirror Images | :flip and mirror adjustable by user |
| Supported Protocol | :TCP/IP,UDP, HTTP, HTTPS, SMTP, WPA/WPA2 |
| Wireless Standard | :IEEE 802.11b/g/n, Bluetooth 4.0 (For Wi-Fi Pairing Only) |
| Frequentie range | :WiFi(H20): 2412-2472 MHz, WiFi(H40): 2422-2462 MHz |
| Transmitted power | :WiFi 18 dBm EIRP |
| Date Rate 802.11b | :11Mbps (max), 80211g: 54Mbps (max.), 802.11n: 150Mbps |
(max.)
Wireless Securtiy| :WPA & WPA2 Encryption
Ethernet| :10/100Mbps
Pan/tilt Angle| :-
Infrared Light| :6 IR LEDs, Night visibility up to 5 meters
Alarm Input / Output| :Not supported
TF/SD card| :External up to 128 GB (Kingston or Transcend)
Power Supply| :DC 5 V/1.0A (adapter)
:Kuanten, KT05W050100EUD
Power adapter for indoor use only
Input voltage: 100-240Vac
Input frequency: 50/60Hz
Output voltage constant: 5V/1A
Output current constant: 5V/1A
Output power constant: 5W
Efficiency 50% load: 75.52%
Input power no load: Max 0.1W
Operate Temper.: -10°C ~ 50°C (14°F ~ 122°F)
Operating Humidity: 20% ~ 85% non-condensing
Storage Temper.: -20°C ~ 60°C (-4°F ~ 140°F)
Operating Humidity: 0% ~ 90% non-condensing
Certification: CE, FCC, RoHS, IP66
| WWW.ALECTO.NL
[email protected]
---|---
Commaxx B.V. Wiebachstraat 37
6466 NG Kerkrade, The Netherlands