Alecto CAM10 Commaxx BV Smart Wifi Camera User Guide
- May 15, 2024
- Alecto
Table of Contents
SMART-CAM10
CAM10 Commaxx BV Smart Wifi Camera
ATTENTION!
Make sure that the SMART-CAM10 is within range of the router during the
registration. The SMART-CAM10 can only be registered to one account. Make sure
you remove the device from the app before changing ownership. See page 5. Keep
away from liquids and humidity.
SPECIFICATIONS
Information Power Adapter: Manufacturers name and address : Shenzhen Keyu Power Supply Technology Co., Ltd., 2~3F, No. 13, Lane3, Yuquan East Road, the 2nd Industrial park, Yulv, Guangming District, 518000
Shenzhen, China.
Model Identifier :
Input voltage :
Input AC frequency :
Output voltage :
Output current :
Output Power :
Average active efficiency :
Efficiency at low 10% load :
No load Power consumption :| KA06E-0501000EU
100-240VAC
50/60 Hz
5.0V DC
1.0 A
5.0 W
75.0 %
–
0.07 W
---|---
Operating system:
Image Sensor:
IR distance:
Resolution:
Viewing Angle:
Image Compression:
SD-card supported:
Wireless RF mode frequency band:Wireless communication protocol: Maximum
transmitted power:
Wireless Security
Operate Temperature
Operating Humidity
Dimensions:| Android 4.4+ or iOS9.0+
1/2.7’’ Color CMOS sensor
< 7 Meter
1920 x 1080 Px
107 x 57 Degrees
H.264
SDXC-type Micro-SD
2412-2472 MHz
WIFI 802.11 b/g/n
19.51 dBm
WEP & WPA/WPA2
-10˚ ~ 45˚C
5%~85% non-condensing
115 x 60 x 60 mm
EU DECLARATION OF CONFORMITY
Hereby, Commaxx declares that the radio equipment type SMARTCAM10 is in
compliance with Directive 2014/53/EU. The full text ofthe EU declaration of
conformity is available at the following internetaddress:
http://DOC.hesdo.com/SMART-CAM10-DOC.pdf
Commaxx BV
Wiebachstraat 37
6466NG Kerkrade, NL
www.alectohome.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>