Alecto DVM200C Expansion Camera Instruction Manual
- May 15, 2024
- Alecto
Table of Contents
Alecto DVM200C Expansion Camera
Specifications :
- Manufacturer : Vtech Telecommunications LTD
- Model Identifier : VT05EEU05100
- Input voltage : 100-240VAC
- Input AC frequency : 50/60 Hz
- Output voltage : 5.0V DC
- Output current : 1.0 A
- Output Power : 5.0 W
- Average active efficiency : 74.0%
- Efficiency at low 10% load : No load
- Power consumption : 0.07 W
Product Usage Instructions
FAQ:
-
Q: What should I do if the camera does not register?
A: If the camera does not register, please ensure that the power adapter is properly connected and try the registration process again following the steps provided in the user manual. -
Q: Can I pair multiple cameras with one parent unit?
A: Yes, you can pair multiple cameras with one parent unit by following the registration process for each additional camera as outlined in the user manual. -
Q: How do I know if the camera is successfully registered?
A: The camera is successfully registered when the image of the new camera appears on the display of the parent unit after following the registration steps.
DVM200C
REGISTERING CAMERA
- First remove the camera from its packaging, then connect the supplied power adaptor, insert it into a wall socket and turn on the camera.
- Now take the parent unit to pair the new camera
- open the setup menu
- select the option ‘Pair/Unpair CAM’
- open this item
- = select ‘Pair CAM’
- = confirm your choice
- select an available camera number
- confirm the instruction
- Keep this button (see the drawing below) depressed for several seconds until the power indicator on the additional camera starts flashing rapidly.
- After several seconds the image of the new camera will appear in the display of the parent unit.
The additional camera is now registered and is ready for use.
SPECIFICATIONS
- Range: up to 50 meters indoors up to 300 meters outdoors
- Parent unit power: 3.8V 2100 mAh Li-ion battery
- model BL198555/BT298555 5VDC 1000mA power adapter (incl.), model VT05EEU05100
- Baby unit power : 6VDC 1000mA power adapter (incl.),
- model: VT05EEU06100
- Frequency: 2400-2483,5 MHz
- Modulation: FSK
- RF power: <20 dBm
- Display: 4.3” TFT LCD display
- WQVGA 480×272 pixel
- Recharging time parent unit battery : ~ 6 hours*
- Life-span parent unit battery : 6~7 hours*
- Temperature sensor range : 10°C – 35°C
- Accuracy: ± 2°C (at 25°C)
- Storage temperature: 0°C – 50°C
DECLARATION OF CONFORMITY
Hereby, Commaxx declares that the radio equipment type Alecto DVM200C is in compliance with directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://DOC.hesdo.com/ DVM200C_DOC.pdf. Use of this equipment is allowed in all countries of the EU. In France, Italy, Russia and Ukraine, only indoor use is allowed.
NetherlandsWWW.ALECTO.NL
SERVICE@ALECTO.NL Commaxx B.V.,
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>