REED INSTRUMENTS R1610 Smart Series Thermo Hygrometer Instruction Manual
- June 9, 2024
- REED INSTRUMENTS
Table of Contents
- REED INSTRUMENTS R1610 Smart Series Thermo Hygrometer
- Introduction
- Product Quality
- Safety
- Specifications
- Instrument Description
- Display Description
- Operating Instructions
- Battery Replacement
- Accessories and Replacement Parts
- Product Warranty
- FCC Statement
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
REED INSTRUMENTS R1610 Smart Series Thermo Hygrometer
Introduction
Thank you for purchasing your REED R1610 Thermo-Hygrometer, Bluetooth® Smart Series. Please read the following instructions carefully before using your instrument. By following the steps outlined in this manual your meter will provide years of reliable service.
Product Quality
This product has been manufactured in an ISO9001 facility and has been calibrated during the manufacturing process to meet stated product specifications. If a certificate of calibration is Required, please contact the nearest authorized REED distributor or authorized Service Center. Please note an additional fee for this service will apply.
Safety
- Never attempt to repair or modify your instrument. Dismantling your product, other than for the purpose of replacing batteries, may cause damage that will not be covered under the manufacturer’s warranty. Servicing should only be provided by an authorized service center.
- Magnetic field warning; please keep a minimum distance of 4 inch (10cm) between pacemaker and meter.
Features
- Measures ambient temperature and humidity
- Easy to operate, designed for one hand operation
- Bendable probe shaft enables easy access to ducts
- Integrated display provides flexibility for use without mobile device
- Magnetic backing allows instrument to be mounted to metallic surfaces
- Data Hold function
- User selectable °F, or °C
- Low battery indicator and auto shut off
- Tripod mount for long-term monitoring
When used with REED Smart Series App:
- Real-time data logger
- User selectable sampling rate from 1 to 120 seconds
- Bluetooth® 5.0 provides connectivity to instruments up to 246′ (75m) away
- Connect, measure and data log up to 6 instruments, simultaneously
- Easy setup with automatic app integration for compatible REED Smart Series instruments
- Export data via Excel or PDF and create custom reports that can be emailed from mobile device
Included
- Thermo-Hygrometer
- 4 x AAA Batteries
Specifications
Temperature
- Measuring Range: -4 to 140°F (-20 to 60°C)
- Accuracy: -4 to 32°F (-20 to 0°C): ±1.6°F (0.8°C)
- 32 to 140°F (0 to 60°C): ±1°F (0.5°C)
- Resolution: 0.1°F/°C
Humidity
- Measuring Range: 0 to 100% RH
- Accuracy: 20 to 80% RH: ±3.5% rdg.
- 0 to 20% & 80 to 100% RH: ±5% rdg.
- Resolution: 0.1% RH
General Specifications
- Display: Multi-Line Enhanced Black Twisted
- Nematic (EBTN) LCD
- Display Size: 1.3″ (34mm)
- Backlit Display: Yes
- Data Hold: Yes
- Adjustable Flex Probe Yes (90° swivel)
- Probe Shaft Length 3.7″ (95mm)
- Probe Diameter 0.43″ (11mm)
- Datalogging Capabilities: Yes (with Smart Series App)
- Real-Time Clock and Date Stamp: Yes (with Smart Series App)
- Customizable Sampling Rate: Yes
- Over range Indicator: Yes
- Auto Shut-off: Yes (adjustable)
- Tripod Mountable: Yes
- Magnetic Backing: Yes
- Low Battery Indicator: Yes
- Power Supply: 4 x AAA Batteries
- Battery Life: Approx. 50 hours (sampling time dependent)
- Connectivity: Bluetooth® 5.0
- Bluetooth® Range: Up to 246′ (75m)
- Max # of Connected Devices: 6
- Software: REED Smart Series App (iOS and Android)
- App Supported Languages: English, French
- Product Certifications CE, UKCA, FCC, IC ID
- Maximum Operating Altitude: 6561′ (2000m)
- Operating Temperature: -4 to 140°F (-20 to 60°C)
- Storage Temperature: -4 to 140°F (-20 to 60°C)
- Operating Humidity Range: 10 to 90%
- Storage Humidity Range: 10 to 90%
- Dimensions: 9.4 x 1.5 x 1″ (240 x 38 x 25mm)
- Weight: 3.2oz (88g)
Instrument Description
- Temperature and Humidity Sensor
- LCD Display
- POWER/HOLD Button
- Bluetooth® Status Indicator Light
- Tripod Mounting Screw
- Battery Cover Lock
- Battery Cover
Display Description
- Temperature Measurement Value
- Relative Humidity Measurement Value
- Humidity Unit of Measure
- Temperature Unit of Measure
- Data Hold Indicator
- Bluetooth® Indicator
- Low Battery Indicator
REED Smart Series App
REED Smart Series instruments can be connected wirelessly to your smartphone
or tablet. All measurement data is transmitted via Bluetooth® to the free REED
Smart Series app. The app allows users to analyze data, generate reports and
send information by email directly from a mobile device.
App Features:
- Bluetooth® 5.0 provides connectivity to instruments up to 246′ (75m) away
- Connect, measure and data log up to 6 instruments, simultaneously
- Easy setup with automatic app integration (Bluetooth® pairing not required)
- Measurement data is displayed as instrument readings, tables, or graphs
- Save data in PDF or Excel Format
- Create custom reports that can be saved on a mobile device or sent by email
To learn more and download the REED Smart Series App from the Google Playstore
(Android) or Apple App Store (iOS), visit
www.REEDInstruments.com/smartseries.
You can also search for the “REED Smart Series” app directly from your device.
Full specifications and Operating System compatibility can be found on the product page at www.REEDInstruments.com/r1610. If you have specific questions related to your application and/or questions related to software setup and functionality, please contact the nearest authorized distributor or Customer Service at info@reedinstruments.com or 1-877-849-2127.
Operating Instructions
Power ON/OFF
Turn the meter ON by holding down the POWER button for approximately 2
seconds. To turn the meter OFF, press and hold the POWER button for
approximately 4 seconds.
Backlight
After powering the meter ON, the LCD Backlight will turn on automatically. In
order to preserve battery power, the LCD will turn off after approximately 15
seconds. To turn the screen back on, press the POWER button.
Establishing Bluetooth® Connection
- In order to establish Bluetooth® connection, the REED Smart Series App must be installed on your mobile device.
- When the App is open and the meter is powered on, the meter will automatically attempt to establish connection with the App. Until the connection is established, the Bluetooth® status indicator light will flash blue
- When connection is successful the Bluetooth® status indicator remains blue and the the current readings are automatically displayed in the App.
REED Smart Series meters feature Bluetooth® 5.0 connectivity which does not
require meters to be paired with the device.
If the App is open and the meter is powered on, a connection will
automatically be established.
Selecting the Temperature Unit of Measure
When the meter is powered on, press and hold the POWER button to toggle between Fahrenheit and Celsius.
Enabling/Disabling Data Hold
- Press the HOLD button to freeze the current reading on the display.
- Press the HOLD button again to resume normal operation.
Enabling/Disabling Auto Power OFF
To preserve battery life, the meter is programmed to turn itself off after 30 minutes of inactivity.
Note: The Auto Power OFF feature can be disabled through the App.
(See REED Smart Series Software Guide located in the “Menu” section of the App
for additional details.)
For additional information on App features including sampling rate setup, data logging, data analysis, export and report generation please see the REED Smart Series App Software Guide at www.REEDInstruments.com/smartseries
Battery Replacement
When the low battery icon appears on the LCD display, the batteries will need to be replaced. In order to replace the batteries, proceed with the following steps:
- Turn off the meter.
- Unlock the battery compartment located at the back of the meter.
- Remove the battery cover.
- Replace the 4 x AAA batteries.
- Secure the battery cover and lock it in place.
Applications
- Environmental studies
- Food distribution
- HVAC/R system installation/evaluation
- Greenhouses and industrial spaces
- Saunas
- Humidors
- Museums
- Lab Monitoring
Accessories and Replacement Parts
- CA-05A Medium Soft Carrying Case
- R8888 Medium Hard Carrying Case
- R9933 Humidity Calibration Standard, 33%
- R9975 Humidity Calibration Standard, 75%
- R9980 Humidity Calibration Kit (33% and 75%)
- R1500 Tripod
Don’t see your part listed here? For a complete list of all accessories and replacement parts visit your product page on www.REEDInstruments.com.
Product Care
To keep your instrument in good working order we recommend the following:
- Store your product in a clean, dry place.
- Change the battery as needed.
- If your instrument isn’t being used for a period of one month or longer please remove the battery.
- Clean your product and accessories with biodegradable cleaner. Do not spray the cleaner directly on the instrument. Use on external parts only.
Product Warranty
REED Instruments guarantees this instrument to be free of defects in material or workmanship for a period of one (1) year from date of shipment. During the warranty period, REED Instruments will repair or replace, at no charge, products or parts of a product that proves to be defective because of improper material or workmanship, under normal use and maintenance. REED Instruments total liability is limited to repair or replacement of the product. REED Instruments shall not be liable for damages to goods, property, or persons due to improper use or through attempts to utilize the instrument under conditions which exceed the designed capabilities. In order to begin the warranty service process, please contact us by phone at 1-877-849-2127 or by email at info@reedinstruments.com to discuss the claim and determine the appropriate steps to process the warranty.
Product Disposal and Recycling
Please follow local laws and regulations when disposing or recycling your instrument. Your product contains electronic components and must be disposed of separately from standard waste products..
Product Support
If you have any questions on your product, please contact your authorized REED distributor or REED Instruments Customer Service by phone at 1-877-849-2127 or by email at info@reedinstruments.com.
Please visit www.REEDInstruments.com for the most up-to-date manuals, datasheets, product guides and software.
Product specifications subject to change without notice.
All rights reserved. Any unauthorized copying or reproduction of this manual
is strictly prohibited without prior written permission from REED Instruments.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
FCC RF exposure statement
The product comply with the FCC portable RF exposure limit set forth for an
uncontrolled environment and are safe for intended operation as described in
this manual.
IC statement
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003. CAN ICES-003(B) / NMB-003(B)
IC RF exposure statement
The product comply with the Canada portable RF exposure limit set forth for an
uncontrolled environment and are safe for intended operation as described in
this manual.
Connect wirelessly to your smartphone or tablet via the REED Smart Series App
- Bluetooth® 5.0 provides connectivity to instruments up to 246′ (75m) away
- Analyze data and create custom reports that can be saved on a mobile device or sent by email
Over 200 portable test and measurement instruments
Access our Product Catalog
References
- Calcert
- REEDInstruments.com - Test and Measure with Confidence
- REED R1610 Thermo-Hygrometer, Bluetooth Smart Series
- REED Smart Series Instruments