CUTELOVE CD03098A Plaque Remover for Teeth Instruction Manual
- June 14, 2024
- CUTELOVE
Table of Contents
PLAQUE REMOVER FOR TEETH
CD03098A Plaque Remover for Teeth
USE STEPS
NOTE
Please fully charge the battery before you use it for the first time Full
charge then battery indicator is green. If the battery indicator turn red and
flashes, then need charge it.
Step 1
Install a cleaning head and tighten it with a wrench
Aim the cleaning head at top interface of the transducer, then use a wrench to
align the bayonet and tighten it clockwise.
Step 2
Long press the button to tum on the device
Briefly press the device control switch to power on, and the Electricity
Capacity light,Mode light and built -in spotlight wil be on at the same time.
Step 3
Press the button to select different modes(Soft – Normal -Middle – Strong )
Step 4
Start to Clean Your Plaque
Put the tip at 45 °on the plaque to start work (ONLY TOUCH TEETH OR HARD
OBJUCTS WILL WORK AND VIBRATING)
Step 5
Long press the button to turn off the device
The device will shut off automatically after 10 minutes of continuous usage.
VISIT: http://www.cutelovehealth.com/ OR SCAN the QR code
CUTELOVE1customerservice@outlook.com
- Activate 12 months warranty
- Join VIP Family
- Exclusive customer service
- Exchange ideas with designers
Just let us know if you have any issues with the product
(NO REASON RETURN FOR REPLACEMENT , NO ADDITIONAL FEE)
#REGISTER NOW
To Make Sure Your Product Is Under The Life Time Service Protection!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>