IMPREMEY C1RMQ2Uv62L Folding Treadmill with Incline Instruction Manual

IMPREMEY C1RMQ2Uv62L Folding Treadmill with Incline 

Product Information

The IMPERMEY Treadmill is a fitness equipment designed to provide an indoor running experience. The treadmill includes various components such as Safety Key, Console Handrail, Right Upright, Left Upright, Motor Cover, Running Deck, Side Rail, Base Cover, Main Frame, Rear Cover, 3-Level Manual Incline, and Pulse Sensor.

The treadmill has a maximum speed of 7.5 MPH and allows users to adjust the speed using the console’s SPEED + / SPEED – buttons. The console also displays the current speed value and provides users with ten customizable speed profiles (U01 – U03).

The treadmill features a Bluetooth function that allows users to connect their smartphones and play music through the treadmill’s speaker. The treadmill requires lubrication for optimal performance, and the package includes a lubrication oil bottle.

Product Usage Instructions

1. Ensure that the treadmill is placed on a flat surface and the power cord is plugged in correctly.
2. Attach the Safety Key to your clothing before starting the treadmill.
3. Stand on the foot rails (side rails) of the treadmill.
4. To adjust the incline level, use the 3-Level Manual Incline feature located on the console.
5. To connect your smartphone via Bluetooth, follow these steps:
6. Turn on the Bluetooth on your smartphone and search for the device.
7. Click to connect the devices when RUN MUSIC appears.
8. After the connection, the voice of your smartphone will be played through the treadmill’s speaker.
9. To start the treadmill, press the START button on the console. The belt movement will begin after a countdown from 3 to 1.
10. To adjust the speed, use the SPEED + / SPEED – buttons on the console. The console displays the current speed value and allows users to set up to ten customizable speed profiles (U01 – U03).
11. The treadmill requires lubrication for optimal performance. Follow these steps to lubricate the treadmill:
12. Open the lubrication oil bottle.
13. Open the plastic cap located on the right side rail.
14. Align the spray nozzle of the bottle with the hole on the side rail and pour in the lubricating oil (20ml).
15. Close the plastic cap. To stop the treadmill, press the STOP button on the console.

If you have any inquiries or require further assistance, please contact IMPERMEY customer support by email at info@impremey.com.

IMPORTANT SAFETY INSTRUCTIONS

Basic precautions, including the following important safety instructions should always be followed when using this treadmill. Read all instructions before using this

treadmill.

DANGER: To reduce the risk of electric shock, always unplug the treadmill from the electrical outlet immediately after using and before cleaning, assembling, or servicing the treadmill. Failure to follow these instructions may lead to personal injury and cause damage to the treadmill

WARNING: To reduce the risk of burns, fire, electric shock or injury to any persons, please read the following:

• Never leave the treadmill unattended while plugged in. Disconnect by turning off the master power switch and unplugging from wall outlet when not in use and before putting on or taking off parts.

• Use this product only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.

• Never operate the treadmill if it has a damaged cord or plug, or if it is not working properly. If it has been dropped or damaged, or been exposed to water, return the product to a service center for examination and repair.

• Do not attempt any maintenance or adjustments other than those described in this manual. Should any problems arise, discontinue use and consult an Authorised
  Service Representative.

• Never operate the product with the air openings blocked. Keep the air openings free of lint, hair, and other obstructions.

• Do not use the treadmill outdoors.

• Do not pull the treadmill by its power cord or use the cord as a handle.

• Keep children and pets away from the equipment while in use.

• Elderly or disabled users should only use this treadmill in the presence of an adult who can provide assistance if required.

• Do not operate where aerosol (spray) products are being used or where oxygen is being administered.

• Keep dry – do not operate in a wet or moist condition.

• The motor cover can become hot while the treadmill is in use. Do not place the treadmill on a blanket or other flammable surface as this can create a fire hazard.

• Keep electrical cord away from heated surfaces.

• Keep the treadmill on a solid, level surface with a minimum safety area clearance of two meters around the treadmill. Be sure the area around the treadmill remains clear of any obstructions during use.

• This treadmill is for domestic household use only. Only one person should use the treadmill at a time.

• Wear comfortable and suitable clothing when using the treadmill. Do not use the treadmill barefoot or in socks. Always wear appropriate athletic footwear. Never wear loose or baggy clothing as it can become caught on the treadmill and create an
  entrapment hazard.

• Always hold on to the handrails while using the treadmill.

• Always make sure the storage latch is in place when folding and moving the treadmill.

• Do not leave children who are under 12 years-old unsupervised near or on the treadmill.

• To disconnect, turn all controls to the off position, then remove plug from the wall outlet.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children should not be allowed to play on or near the treadmill at any time.
  CAUTION – RISK OF INJURY TO PERSONS

• To avoid injury, use extreme caution when stepping onto or off of a moving treadmill belt. Carefully read this instruction manual before use.

• Maximum Weight Capacity is 198lbs.

• Pull out the Safety Tether Key for emergency stop.

• This unit must be plugged into a nominal 110 volt 50/60Hz outlet which has been grounded. Keep hands clear of all moving parts. Never place hands or feet under the treadmill while in use.

• Do not use the treadmill on a carpet that is greater than 1.3 cm in height.

• Before using the treadmill, check that the belt is aligned and centered on the running deck and all visible fasteners on the treadmill are sufficiently tightened and
  secure.

• Cleaning and user maintenance shall not be made by children without supervision.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• Never operate this treadmill if it is in the folded position.

• Allow the running belt to fully stop and unplug the power cord from the wall outlet before folding up the treadmill.

• Always face towards the computer console and do not run backwards on the running belt.

Grounding Instructions
The product must be grounded first. If malfunction or breakdown occurs, grounding will provide a path of least resistance for electric current to reduce the risk of electric shock. The product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Danger
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in
doubt as to whether the products are properly grounded. Do not modify the plug provided with the product – if it will not fit the outlet, please have a proper outlet
installed by a qualified electrician.

WARNING
Before beginning any exercise program consult your physician. This is especially important for people who are over 35 years old or who have pre- existing health problems. Read all instructions before using any fitness equipment. Do not operate this exercise equipment without properly fitted guards, as the moving parts can present a risk of serious injury if exposed.

CAUTION
Read all instructions carefully before operating this product. Keep this Manual for future reference.

Name of Parts

Parts in the Package

Assembly Instruction

When installing and using the treadmill, please read all the instructions in this manual carefully and keep this manual properly.

Tips:

1. Please note that as the treadmill is heavy, it is recommended that two people complete the assembly together. Open the package and take out all the
   protective foam and all parts.

2. Please wear gloves and assemble in order listed in the manual.

Step 1:
Put the main frame on the flat floor and cut all the straps as shown in the Picture 1. Do not cut the straps before taking the product out of box. Be ware of the risk of hands pinching when taking out the product.

Step 2: Install the both uprights
Lift up the left and right uprights with both hands as shown in Picture 2. Be ware of the risk of hands pinching when handle the uprights.
Put the washers first before tightening the bolt. Use Wrench6# to fasten the left and right upright on the both front base frames with a washer MIO and a bolt Ml045 correspondingly as shown in Picture 3-1. Then use Wrench #5 to fasten the left & right upright on the both front base frames with a washer MS and a bolt M815 accordingly as shown in Picture 3-1 & 3-2.

Attention : please do not adjust or loose the two bolts that are pre- assembled to the both uprights. ( Picture 4 )

Step 3 : Install the front base covers. Use the screwdriver to connect the left and right base covers to the main frame with two screws M5*12 as shown in the Picture 5.

Step 4 : Install the console.
Lift up the left and right handrails with both hands as shown in Picture 6 .

Put the washers first before tightening the bolt. Use Wrench #5 to fasten the left & right side of the console on the both uprights with a washer MS and a bolt
M8*15 accordingly as shown in Picture 7 .

Turn the console upward slightly to expose the mounting hole, then use the adjusting knob to fix the console as shown in Picture 8.

Operation Instruction

Get Ready

1. For your safety, please use the treadmill in good physical condition and wear suitable clothing and shoes for fitness.
   

2. Warm-up exercise is recommended before you start to work out.
   Arm stretching
   With both hands open, arms straight up and up to the highest point, left hand can be tilted to the right or right hand can be tilted to the left, stop for 3 seconds, and then slowly lower the arm.
   Inner thigh stretching
   Sit on the ground, hold your feet with both hands to make the soles of your feet close together, slowly stretch your body towards the floor to the lowest point, stop for 3 seconds, then slowly return your body up to the original posture..
   Back and waist stretching
   With your arms straight, your body slowly bends towards the floor to encourage your back and waist to stretch, stop for 3 seconds, and then slowly return your body to its original position.
   Thigh stretching
   Sit on the ground, hold the left ankle with your left hand and bring your left foot close to the inside of your right thigh. The right hand slowly stretches your right thigh toward the right toe, stops for 3 seconds, and then slowly returns your body to its original position. Repeat the above movements to stretch the left thigh.

3. Check all the screws are tightened and cables are connected correctly and make sure nothing is on or will hinder the movement of the running belt.

4. Plug in the power cord and turn the power switch ON. (See Picture 9).
   

5. Adjust the incline level. Please kindly note that there are three incline levels for your choice. You could adjust the incline level by turning and aligning the numbers labeled on the manual incline with the ground each time. (See Picture 10)
   

6. Stand on the foot rails (side rails) of the treadmill.

7. Attach the safety key clip to part of your clothing and put the safety key to the safety-key hole on the console as shown in the Picture 11 and then the
   treadmill will be on Ready status.
   Tip: Please note that the treadmill will not operate without the safety key. Clip the other end of the safety key to your clothing before exercising to ensure the
   treadmill will stop if the user accidentally falls off the treadmill. If the user falls off, the safety key will come off the console and the treadmill will stop at once
   to avoid further injury. Monitor will display the error code as shown in Picture 12.
   

8. Learn the Buttons and Display Function
   

TIME: Displays your elapsed workout time in minutes and seconds.
SPEED : Displays the current training speed.
DIS (Distance): Displays the accumulative distance travelled during your workout.
CAL (Calorie): Displays the total calories burned during your workout.
PULSE: Displays your current heart rate in beats per minute {8PM). To activate, grip the hand pulse sensors during exercise and the pulse will display after a few
seconds. For a more accurate reading, grip pulse sensors with both hands.

Press the button to begin exercising.
Press the  button to stop/pause your workout.
: Press the button on the console to increase speed.
: Press the button on the console to decrease speed.
PROGRAM : Press the button to cyclically select the automatic program, User- defined programs and BMI Function.
MODE : Press the button to select the 3 countdown training modes.
Time countdown ➔ Calories countdown ➔ Distance countdown➔ Normal Mode
Shortcut button 3 : Press the button to switch the speed to 3M PH quickly.

Shortcut button 5: Press the button to switch the speed to SM PH quickly.

Get Started

Manual Program
Simply press the  button on the console to begin belt movement after counting down from 3 to 1. Press or  buttons on the console to adjust the speed. As an alternative, you may press the two shortcut buttons on the console as shown in the picture to quickly adjust the speed. (See Picture 14}

3 Count-down Modes

When you press the button , either one of TIME, DIS(Distance), and CAL(Calorie) can be set to count down to reach the particular fitness goal, at the same time, the other two will count up during the workout. You can also adjust the speed by pressing or  buttons on the console. (See Picture 15}.

Press the button, the TIME window will display the default elapsing time as 30:00, press or  buttons on the console to set count-down TIME from 5:00 minutes to 99:00 minutes. Simply press the button on the console to begin belt movement. Once the TIME count-down reaches zero, the belt movement will be ended. (See Picture 16}.
To change the mode to DIS (Distance) count-down as the running belt is operating, please press the on the console twice until the data is cleared and
then press the  button twice until the DIS (Distance) pointer is blinking. The default distance was set as 1.0 Mile. Press (..If+) / [..If-] on the console to set count-down distance From 1.0-99 Miles. Press the button on the console to begin belt movement. Once the DIS (Distance) count-down reaches zero, the
belt movement will be ended. {See Picture 17).

To change the mode to CAL {Calorie) count-down as the running belt is operating, please press the (sToP) button twice until the data is cleared and then press
the button three times until the CAL (Calorie) pointer is blinking. The default calorie was set as 50 KCAL. Press or  buttons to set count-down
distance from 20 KCAL to 990 KCAL. Press the button on the console to begin belt movement. Once the CAL {Calorie) count-down reaches zero, the
belt movement will be ended. {See Picture 18)

64 Pre-set Programs
Tip: Please kindly note that there are 64 pre-set programs for reaching 8 different training goals with 8 different intensity levels on each training goal as shown in the Picture 19. All the pre-set programs are made up of 18 time-based segments; the speed is pre-set on each segment. The default pre-set elapsing time of each program is 30:00 minutes, but it can be adjusted from 5:00 to 99:00 minutes by pressing or  buttons on the console and the elapse time of 18 segments on each program will be automatically arranged according to the time you set for your workout time. The speed you adjust will only be effective on the ongoing segment. After the segment finished, the speed on the next segment will still process with pre-set values. (See Picture 19).

Step 1: Please select a program among 8 options listed below (From Pl to PS) by pressing 0 button.
Step 2: After selecting the program, press 0 button to select the intensity from Level 1 to Level 8.
Step 3: Press or  buttons on the console to modify the elapsing time. It can be adjusted from 5:00 to 99:00 minutes.
Step 4: Press button on the console to begin belt movement.
Tip: To change the program, please press the button on the console twice until the data is cleared and then repeat the above-mentioned steps.

User-defined Program {U01-U02-U03)

There are 3 User-defined programs according to user’s training goals. The default elapsing time of each program is 30:00 minutes, but it can be adjusted from 5:00 to 99:00 minutes by pressing or  buttons on the console. All the User-defined programs are composed of 18 time-based segments. The elapsing time of 18 segments on each program will be automatically arranged according to the time you set for your workout time. The default speed of each segment is
0.6MPH and it could also be adjusted from 0.6MPH to7.5MPH by pressing or buttons on the console. The speed you adjust will be saved automatically on the ongoing segment. After finishing setting all the 18 segments in every User-defined program, the data you set will be saved and recorded automatically in each segment and program until you reset all the data again.

Press button until the screen display P 8, then press the button once more to let the screen display and you are now on the User-defined program 01 (U0l} ( See Picture 20-1}; keep pressing the 0 button once again, the screen will display U02, and you are now on the User-defined program 02 ( See Picture 20-2}; press the button again when you are on the User-defined program 02 , you will enter the User-defined program 03
. ( See Picture 20-3}

Each User-defined program is composed of 18 time-based segments. To adjust the speed of each segment in every User-defined program when users are in
the User-defined program( Picture 20-1 / Picture 20-2 / Picture 20-3 ), press button on the console, the middle window will display S-01 to S-18, which brings users to the 18 time-based segments; the default speed of each segment is 0.6 MPH shown on left window, but it can be adjusted from 0.6MPH to
7.5 MPH based on each time-base segment by pressing or  buttons on the console.( See picture 21)

The default elapsing time of each program is 30:00 minutes. After setting the speeds for all 18 segments in the program, press button to enter time setting interface to adjust the overall time for the program from 5:00 to 99:00 minutes by pressing or  buttons on the console. To start the User-defined program after finishing setting all the data, please press button on the console to begin the program and the belt movement. You can use U01/U02/U03 to set 3 different users modes or 3 different time periods or different speed status according to users’ training goals. After finishing setting speeds for 18 time-based segments and the overall time for each User-defined program, please press the button on the console twice until the data is cleared and then press button to change the program among Pre-set programs and User- defined programs (U01-U02-U03) options to start your workout.

CONNECT SMART PHONE

If the treadmill have the bluetooth function, then connect the smart phone as follow steps:
STEP1: Turn on the Bluetooth of the smart phone, search the device, and click to connect the devices when RUN MUSIC appears.
STEP2: After the connection, the voice of smart phone will be played by the speaker on the computer.

Pulse Function
The PULSE Window on the monitor works in conjunction with the Pulse Sensors on both handrails {See Picture 22).

1. When you are ready to read your pulse:
2. Please place both hands firmly on the Pulse Sensors.
3. For the most accurate readout, it is important to use both hands simultaneously.
4.  Your estimated heart rate will display in the PULSE window approximately a few seconds after you grasp the Pulse Sensors.
5. Please kindly note that this estimated data should not be used as a reference for medical diagnosis.

GETTING STARTED

Simply press the START button on the console to begin belt movement after count-down from 3 to 1. Press SPEED + /SPEED – buttons on the console to adjust the speed.

Body Fat Measurement Function
This function is to estimate your body fat according to your physical information. Please kindly note this estimated data should not be used as a reference for medical diagnosis.
STEP 1: Please keep pressing 0 button until the window displays FAT as shown in the Picture 23.

STEP 2: After entering FAT function by pressing button, the left window displays Fl (representing GENDER} and the default data on the right window shows 1 which represents MALE. Press or  buttons on the console to set gender from 1 to 2 which represents FEMALE. Then press button to go to next step. (See Picture 24}
STEP 3: After pressing again, the left window displays F2 (representing AGE} and the default data on the right window shows 25, press or buttons on the console to set the age froml0-99. Then press to go to the next step. (See Picture 25).

STEP 4: After pressing one more time, the left window displays F3 (representing HEIGHT} and the default data on the right window shows 67.
Press or  buttons to set height from 39-87 inches. Then press to go to next step. (See Picture 26}.
STEP 5: After pressing once again, the left window displays F 4 (representing WEIGHT) and the default data on the right window shows 154. Press or   buttons on the console to set weight from 44-330lbs. Then press to go to next step. {See Picture 27).

STEP 6: After finishing all the settings for the necessary physical information, please press again. The left window will then display F5 while the right
window will display “ or  “, which means the monitor is working on calculation. Please hold the pulse sensor on both handrails with your hands. Around a few seconds later, the body fat result (BMI) will be displayed on the right window by replacing”—“. (See Picture 28).

Finish Workout

During your workout in any mode, when you press , the treadmill will be paused, if you want to resume your workout, you can press [START] and all previous data will resume counting, treadmill belt will begin movement after the count-down. If you want the treadmill to be on start/ready status, press
again after pausing the treadmill. During selecting a program or setting the information, press twice will return to start/ready status.

Storage and Move

For space-saving storage, Advenor treadmill can be easily folded manually.

Steps:

1. Raise the treadmill with your hands until the running deck is firmly held by the supporting cylinder and its position is locked as shown in the Picture 29.
   

2. To put down the running deck, push the cylinder with your foot to release the folding mechanism as shown in the Picture 30.

To easily move the treadmill, please hold the handrails with both arms when it’s in folded position and then tilt the treadmill until the wheels roll smoothly to move it to the expected location as shown in the Picture 31.

Running Belt Adjustment

The treadmill running belt has been pre-adjusted and passed the quality control inspection before leaving the factory. However, after a long period of use, the running belt may run off.
The reasons are as follows:

• The frame is not stably laid
• The user is not running on the center of the running belt;
• The user’s two feet are not using even strength.
  Adjustment method of treadmill running belt:

1. If the running belt deviates to the left, you can use the Wrench #6 to turn the left adjustment screw clockwise or turn the right adjustment screw counterclockwise. It is recommended to adjust 90 degrees (a quarter turn) each time. (See Picture 32-1}
   

2. If the running belt deviates to the right, you can use the Wrench #6 to turn the right adjustment screw clockwise or turn the left adjustment screw counterclockwise. It is recommended to adjust 90 degrees (a quarter turn) each time. (See Picture 32-2}
   

3. After a period of use, the belt may stretch slightly, and when someone runs on it, the belt may slip or stop. When these phenomena occur, the screws on both sides should be rotated a quarter turn clockwise by Wrench #6 as shown in Picture 32-3. If the belt is too tight, please use Wrench #6 to loosen the screws on both sides by rotating a quarter turn counterclockwise.
   

Care & Maintenance

WARNING: To prevent electrical shock, please turn off and unplug the treadmill before cleaning or performing routine maintenance.
WARNING: Always check the wear and tear components like foot lock latch tube and running belt to prevent injury.
CLEANING
After each exercise, ensure that the unit is wiped down and any sweat is removed from the unit.
The treadmill can be cleaned with a soft cloth and mild detergent. Do not use abrasives or solvents. Be careful not to get excessive moisture on the display panel as this might damage the unit and create an electrical hazard.
Please keep the treadmill, especially the computer console, out of direct sunlight to prevent damage to the screen.

STORAGE
Store the treadmill in a clean and dry indoor environment. Never leave or use the unit outdoors. Ensure the master power switch is off and the power cord is un-plugged from wall outlet.

LUBRICATION
Lubricating under the running belt will ensure superior performance and extend its life expectancy. After the first 25 hours of use (or 2-3 months), please apply some lubricant, and repeat for every following 50 hours of use (or 5-8 months).

How to check running belt for proper lubrication
Lift one side of the running belt and feel the top surface of the running deck. If the surface is slick to the touch, then no further lubrication is required. If the surface is dry to the touch, apply some lubricant.

How to apply lubricant

• Open the lubrication oil bottle
• Open the plastic cap located on the right side rail(As shown in the figure).
• Align the spray nozzle of the bottle with the hole on the side rail and pour in the lubricating oil 20ml.
• Close the plastic cap.
• Run on the treadmill at a slow speed for 3 to 5 minutes to evenly distribute lubricant.

NOTE: DO NOT over lubricate running deck. Any excess lubricant that comes out should be wiped off.

Trouble Shooting

Treadmill will not start.

|

1. Treadmill not plugged in.
2. Safety Tether Key is not correctly installed.
3. Circuit breaker in the house has been tripped.
4. Treadmill circuit breaker has been tripped.

|

1. Plug the power cord into a wall outlet.
2. Reinstall the Safety Tether Key.
3. Reset the circuit breaker, or call an electrician to replace the circuit breaker.
4. Wait 5 minutes and then try to restart the treadmill.

Belt slips.| Belt not tight enough.| Adjust belt tension.

Belt hesitates when stepped on.

| 1.   Not enough lubrication applied onto the running deck.

2.   Belt is too ti ht.

| 1.   Apply lubricant.

2.   Adjust belt tension.

Belt is not centred.| Running belt tension not even across the rear roller.| Centre the belt.

Error Code

EOS

| Overload of the input current of motor that triggered the power control board protection.| Please check the resistance of the running belt.
E07| Security protection.| Please check the Safety Key is placed on correct position and fits properly.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>