BLOW V380 Pro App Speed-X Ptz Ht-191 Dome Color Vision Motion Detection IP Camera User Manual
- June 9, 2024
- BLOW
Table of Contents
USER MANUAL
Intelligence · Technology · Security
Download “V380 Pro” APP
Search for “V380 Pro” in the download and install the V380 Pro APP.
Scan the QR code to download the V380 Pro app
http://www.av380.cn/v380proen.php
Device initialization
App Store or scan the QR code at the bottom left to
App Store or scan the QR code at the bottom left to First time to use camera,
please be patient to setting.
Please add your device to app after you hear the voice to confirm that the
device has been started.
y, and the specifics are subject to the
(The position of the Reset button is for reference onl device you have)
Choose the type of your camera
Please select the corresponding connection method according to your camera type.
-
For the devices which using WiFi or network cables, please select “WiFi Smart Camera” .
• 5G WiFi is temporarily not supported -
For 4G camera, please select “4G Smart Camera” and add your device by scanning the QR code.
WiFi Smart Camera
- Before adding a wireless camera, please turn on the mobile WiFi first.
AP
Step2. Select your WiFi, and input password, then select “Confirm”.
Step3. Select the ” Connect AP spot” , and select the device
hotspot(MV+ID), then device will automatically connect to WiFi after returning
to the App.
- Please select “CONNECT” if WLAN network has no Internet access.
- Please press “Reset” button 2s to change WiFi mode to Hotspot model if you don’t find the hotspot “MV+ID”.
Step4. Select or input “device name”
Step5. Click “Play interface” to set your password.
Return to view your device.
4G Smart Camera
Step1. Open the bottom cover of the camera body, install the SIM card and TF
card, and then close the bottom cover to finish the installation (embedded SIM
card camera does not need to be installed).
Step2. Power on the camera, waiting for 1 minute; when camera prompts
“connection completed”, please use APP to scan the QR code on the camera
to add device.
- schematic diagram for reference only, the specics a re subject to the device you have)
Step3.when camera prompts “Successful connection” , please use APP to scan
the QR code on the camera to add device.
tep4. After added the camera, you can check the remaining data and recharge
data on main screen or check it in “Profile”
SD Micro Memory card Installation
Note: The camera can maximum support a 128G TF memory card.
PTZ camera: The TF memory card is at the bottom of the camera.
Open the plastic cover of the micro SD slot. Then, you will find the card slot.
Insert the memory card carefully(the metal surface of the memory card is close
to the motherboard).
Hotspot Connection”
Bullet camera: The TF memory card is at the bottom of the camera.
Open the plastic cover of the micro SD slot. Then, you will find the card slot.
Insert the memory card carefully(the metal surface of the memory card is close
to the motherboard).
, and select “Finish” or “Skip”.
PT Baby camera: Put the camera in a heads-up position, and then you will see
the card slot,
Insert the memory card according to the card direction diagram.
Panoramic camera: The memory card slot is on the side.
Insert the memory card according to the card direction diagram.