DALI LN-12A-H, LN-12A-L 0/1-10V Constant Current LED Driver Instructions
- June 12, 2024
- DALI
Table of Contents
- DALI LN-12A-H, LN-12A-L 0/1-10V Constant Current LED Driver Instructions
- Model No.: LN-12A-H,LN-12A-L
- Features
- Mechanical Structures and Installations
- Technical Parameters
- LED Current Selection
- Applications
- Wiring Diagram
- Dimming Curve
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
DALI LN-12A-H, LN-12A-L 0/1-10V Constant Current LED Driver Instructions
Model No.: LN-12A-H,LN-12A-L
Features
- Dimming interface: 0-10V, 1-10V, 10V PWM, Resistor
- Universal AC input / Full range
- Flicker – Free
- 1 channel constant current output, configurable current via DIP switch
- Synchronize on multiple number of LED drivers
- Over-heat / Over-load / Short circuit protection, recover automatically
- Full protective plastic case
- Suitable for indoor LED lighting application
- 5 Year, 50,000hr warranty
Mechanical Structures and Installations
Technical Parameters
| Model | LN-12A-H | LN-12A-L |
|---|
Output
| Output Voltage| 3-24VDC| 9-45VDC
Max Output Voltage| 33VDC| 48VDC
Output Current| 350-700mA| 100-450mA
Output Power| Max. 12W
Dimming Range| 0～100％, dimming depth:0.01%
PWM Frequency| 4000Hz
Current Accuracy| ±5％
Ripple & Noise| < 100mV
Input
| Input Voltage Range| 100～240VAC
Frequency Range| 50/60Hz
Efficiency| >79%/230VAC| >80%/230VAC
Alternating Current| 0.3A/115VAC, 0.15A/230VAC
Anti Surge| L-N:1KV
Inrush Current| Cold start 27A at 230VAC
Leakage Current| < 0.5mA/230VAC
No Load Power| < 2W
Protection
| Over Load Power| Hiccup,recovers automatically affer fault condition is
removed
Short Circuit| Hiccup,recovers automatically affer fault condition is removed
Over Temperature| Current decrease when PCB temp>100℃, recovers automatically
affer fault condition is removed
Environment
| Woking Temperature| -20℃～50℃
T-case Max| 80℃
Working Humidity| 20％～90％RH, non-condensing
Storage Temp/Humidity| -40℃～80℃, 10％～95％RH
Temperature Coefficient| ±0.03％/℃ (0-50％)
Vibration Resistance| 10-500Hz, 2G, 6min/cycle, X,Y,Z axes/2min
IP Rating| IP20
Safety&EMC
| Security Specifications| IEC/EN61347-1, IEC/EN61347-2-13
Withstand Voltage| I/P-O/P: 3750VAC
Insulation Resistance| I/P-O/P: 100MΩ/500VDC/25℃/70％RH
EMC Emission| EN61000-3-2 Class C, IEC61000-3-2
EMC Immunity| EN61000-4-2.3.4.5.6.8.11, EN61347
Certications| CE
LED Current Selection
Applications
- Suitable for downlight, spotlight and decorative
- Office / Commercial / Domestic Lighting, Hotels, Classrooms, Warehouse, Health care, Retail and
- Use for retrofit upgrades & new luminaire
Wiring Diagram
- The 0/1-10V input is operable via commercially available simple rotary wall switchs designed for 0/1-10V dimming equipment or from decicated system central dimming
- Compliant with 0-10V, 1-10V, 10V PWM, RX(4 in 1).
- We recommend the number of LED drivers connected to 0/1-10V dimmer does not exceed 50 pieces,
The maximum length of the wires from dimmer to LED driver should be no more than 50 meters.
Dimming Curve
0/1-10V dimming
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>