FESTOOL PHC 18 Phone Charger Instruction Manual
- June 6, 2024
- FESTOOL
Table of Contents
FESTOOL PHC 18 Phone Charger
Symbols
| Warning of general danger
---|---
| Read the
operating manual and safety warnings.
| Inserting the battery pack.
| Remove the battery pack
| CE marking: Confirms the machine’s compliance with European Community
directives.
| UKCA marking: The United Kingdom Conformity Assessed symbol is a marking for
products being placed on the market in the United Kingdom. It is a
manufacturers indication that the product is in conformance with the relevant
regulations in the UK.
| Do not dispose of it with domestic waste.
| Tip or advice
►
| Handling instruction
A
| Ampere
V
| Volt
W
| Watt
Safety warnings
WARNING! Read all safety warnings, instructions, illustrations and
specifications provided with this power tool. F ailure to follow all
instructions listed below may result in electric shock, fire and/or serious
injury. Save all warnings and instructions for future reference.
Follow the operating manual for the battery pack.
- Do not use the machine in the rain or in damp surroundings. Moisture in the machine may cause a short circuit and fire.
- Do not insert any nails, wire or similar into the USB port. This could cause the tool to short-circuit, smoke or catch fire.
- Do not connect the electrical outlet module, an alternative power source or a high-voltage tool to the USB ports. To do so would be a fire risk.
The USB ports are designed solely for charging low-voltage tools (5 V/2.4 A).
Intended use
The Phone charger is intended for charging mobile end devices with the
customer’s own USB cable or for inductive charging of smartphones.
The Phone charger is suitable for use with BP Festool battery packs of the
same voltage class.
**** The user is liable for improper or non-intended use.
Technical data
| Phone charger | PHC 18 |
|---|
USB-A port
Output compatible with USB‑CTM| 5 V/2.4 A (12 W/port)
5 V/2.4 A (12 W/port)
Inductive charging:
Qi-BPP / Qi-PPDE| 5 W / 9 W
Operating temperature| -10 °C to 50 °C (14 °F to 122 °F)
Dimension (L x W x H)| 125 mm x 77.4 mm x 39 mm (4.9″ x 3.0″ x 1.5″)
Parts of the device / Functional description
[1-1] Output compatible with USB‑CTM
[1-2] On/off switch
[1-3] USB-A output
[1-4] LED display
[1-5] Inductive charging surface The specified illustrations appear at
the beginning of the Operating Instructions.
Battery pack
Before using the battery pack, check that the battery interface is clean. Any contamination of the battery interface may impair correct contact and lead to the contacts being damaged.
A faulty contact may result in the machine overheating or being damaged.
[2A] Remove the battery pack.
[2B] klick Insert the battery pack – until it clicks into place.
Further information about the battery pack with capacity indicator can be
found in the corresponding operating manual.
Operation
Switching on/off
Switching on
► Press on/off switch [1-2].
LED indicator [1-4] lights up green: Phone charger is in standby.
or
LED indicator [1-4] flashes green for two seconds: Battery capacity low, Phone
charger switches off automatically. Switching off
► Press and hold the on/off switch [1-2] for two seconds. Phone charger
switches off
If no port is active and the Phone charger is in standby for 30 minutes, the Phone charger automatically switches off.
Charging
Inductive charging
► Place smartphone in the centre of the inductive charging surface [1-5].
► Check state of charge of the smartphone.
LED indicator [1-4] lights up green: Charging process begins automatically or
charging process is completed.
If the smartphone does not start the inductive charging process automatically:
► Remove the protective cover of the smartphone if necessary.
► Place the smartphone with its reverse in the centre of the inductive
charging surface [1-5].
► Make minimal alterations to the position of the smartphone until the
charging process starts.
**Charging with USB cable***
Metallic foreign objects (e.g. coins or keys) affect the charging process and must not be on the inductive charging surface [1-5].
► Connect USB cable with USB-A port [1-3] or with port compatible with
USB‑CTM [1-1].
► Connect USB cable with end device.
► Check state of charge of the end device.
LED indicator [1-4] lights up green: Charging process begins automatically
or charging process is completed.
* Not included in the scope of delivery.
Troubleshooting
LED indicator [1-4] flashes red: Charging process faulty. Charging process of the used port or the inductive charging surface is aborted.
► Switch off (see section 7.1).
► Remove the battery pack (see section 6).
► Check Phone charger for defects or foreign objects.
► Check USB cable.
► Reinsert the battery pack (see section 6).
► Switch on (see section 7.1).
► Carry out charging process again with a different end device.
If no end device can be charged, contact the manufacturer or service workshop
(see section 8).
_ Not included in the scope of delivery._
LED indicator [1-4] lights up red: Excessive temperature.
Charging process is interrupted.
Charging process is continued as soon as the temperature is once again low
enough: LED indicator [1-4] lights up greem.
Service and maintenance
⚠ WARNING
Any maintenance or repair work that requires opening of the motor or gear housing should only be carried out by an authorised Customer Service Centre (name supplied by your dealer)!
► Maintenance or repair work carried out by an unauthorised person can lead to the wrong connection of the power cord or other components, which in turn can lead to accidents with serious consequences.
⚠ WARNING
To prevent accidents, always remove the plug from the power supply socket before carrying out any changes or maintenance work on the tool!
►Do not use compressed air to clean the electrical tool! Do not try to clean parts inside the tool in this way, as you could let foreign objects in through the openings of the tool housing.
Customer service and repairs must only be carried out by the manufacturer
or service workshops. Find the nearest address at:
www.festool.com/service
Always use original Festool spare parts. Order no. at:
www.festool.com/service
► Clean the machine with a soft, dry cloth to prevent damage. Do not use
solvents.
Environment
Do not dispose of the device in the household waste! Recycle devices,
accessories and packaging. Observe applicable national regulations.
EU only: In accordance with the European Directive on waste electrical
and electronic equipment and implementation in national law, used power tools
must be collected separately and handed in for environmentally friendly
recycling.
Information on REACH:
www.festool.com/reach
General information
USA: Federal Communications Commission (FCC) Interference Statement
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable pro-tection against harmful
interference in a residential installation. This equip-ment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to cor-rect
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: Any changes or modifications not expressly approved by the party respon-sible for compliance could void the us-er’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Industry Canada statement
This device complies with ISED’s licenceexempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
greater than 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
The product comply with the FCC/IC RF Exposure for Low Power Consumer Wireless
Power Transfer. RF exposure limit set forth for an uncontrolled environment
and are safe for intended operation as described in this manual.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Imported into the UK by
Festool UK Ltd
1 Anglo Saxon Way
Bury St Edmunds
IP30 9XH
Great Britain
Documents / Resources
|
FESTOOL PHC 18 Phone
Charger
[pdf] Instruction Manual
PHC18, BYG-PHC18, BYGPHC18, PHC 18 Phone Charger, Phone Charger
---|---