Alecto SMARTBABY5 Wi-fi Baby Monitor Camera Instruction Manual
- May 15, 2024
- Alecto
Table of Contents
SMARTBABY5BK
SMARTBABY5
http://e.tuya.com/smartlife
SMARTBABY5 Wi-fi Baby Monitor Camera
WHAT’S IN THE BOX?
DESCRIPTION
- Status indicator light
- Power input
- Micro SD card slot
- Speaker
- Microphone
- Reset
INSTALLATION
PLACEMENT
REMOVE DEVICE ?
APP FUNCTIONS
| Take screenshot
---|---
| Microphone button
| Video recording button
| Playback of recordings on SD card (if available)
| Motion and sound detection settings
| Photo album: storage of screenshots and videos
SPECIFICATIONS
| Image Sensor: | 1/3’’ 2 Megapixel CMOS |
|---|---|
| Shutter: | 1/15~1/10,000s |
| Min Illuminance: | Color 0.01Lux@F2.0 |
Black/White 0.01Lux@F2.0
Lens:| 3.6mm @F2.0
Viewing Angle:| 100°
IR distance:| Night visibility up to 10m
Day/Night:| Auto (ICR)/Color/B/W
Effective pixels:| 1920(H) x 1080(V) P
WDR:| Digital WDR
Video Compression:| H.264/H.265
Bit rate:| 32Kbps~2Mbps
Audio input/output:| Built in mic/speaker
Storage:| SD card (max. 128G),
Cloud Storage, NVR
Wireless RF mode frequency band:| 2412-2472 MHz
Transmit Power:| < 20 dBm
Wireless communication protocol:| 2.4G WIFI (IEEE802.11 b/g/n)
Security:| User authentication, software
encryption
Alarm Trigger:| Intelligent motion detection
Communication Protocol:| HTTP, TCP/IP, DHCP, DNS, RTSP
Interface Protocol:| Private
Operating System:| Android 5.0+ or iOS9.0+
Operating Temperature:| -20˚C to 50˚C
Dimensions:| 80x60x73mm
Net weight:| 78g
LED light indication:| Red solid: Camera network not OK
Red blinking: Awaiting wifi connection
Blue solid: Camera running correctly
Blue blinking: Currently connecting
Adapter model no.:| GTA92-0501000EU
Manufacturers name and address:| Dongguan Green Power One Co.,
Ltd, No.26, Hongyun Street,
Chonghe Village, Qingxi Town,
Dongguan, 523641 Guangdong, China.
Input voltage:| 100-240VAC
Input AC frequency:| 50/60 Hz
Output voltage:| 5.0V DC
Output current:| 1.0 A
Output Power:| 5.0 W
Average active efficiency:| 74.13%
Efficiency at low 10% load:| –
No load Power consumption:| 0.1W
**** GENERAL
- Read and keep the instructions. All the safety and operating instructions should be read before use.
- This device can’t replace responsible adult supervision.
- This device is designed for indoor use only.
- The units should not be exposed to rain or moisture.
- The units should not be exposed to direct heat sources.
- This product is not a toy and should be kept out of children’s reach.
- This product contains small parts, take care when unpacking and assembling the product.
- Children can become entangled in the cords, therefore power cords should be kept more than 1 meter away from the crib and baby’s reach at all times.
- The units should only be used with the AC power adapters included in this package (rated 5V; 1.0A).
- Don’t use the units if the cord or plug is damaged.
- Don’t attempt to repair or adjust any of the electrical or mechanical functions of the unit, if you do, the guarantee will be made void.
- This product must not be placed in an enclosed area that may impede the air flow.
ATTENTIE!
- Make sure that the product is within range of the router during the registration.
- The product only supports 2.4GHz WiFi networks.
- As standard, the sound and motion detection alarms are off. Make sure that you activate the desired notifications immediately after installation.
- The product can only be registered to one account. Make sure you remove the device from the app before changing ownership.
- In the event of a connection problem, you will only receive a message in the app after 30 minutes.
EU DECLARATION OF CONFORMITY
Hereby, Commaxx declares that the radio equipment type SMARTBABY5 is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
http://DOC.hesdo.com/SMARTBABY5-DOC.pdf
Commaxx B.V.
Wiebachstraat 37
6466NG Kerkrade
The Netherlands
www.alectohome.com
v1.3
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>