Fulham TJTUNV023ACXXXB LED Light Engines Modules Retrofit Kits Owner’s Manual

: June 9, 2024
: FULHAM

Fulham TJTUNV023ACXXXB LED Light Engines Modules Retrofit Kits

DirectAC UNV Retrofit Kit Engines

Integrated AC Direct Drive (No DC Driver)
Universal Voltage (120~277) AC Engine
Suitable for open or fully enclosed luminaires
Suitable for luminaires with plastic and glass lenses
All 90CRI product meets CEC Title 24 requirement
cULus Classified 1598C
cULus Recognized 8750
Energy Star Luminaire 2.1 Listed (for rebate programs)
Energy Star Luminaire CSD

General Specifications

Input Voltage / Frequency ®	120-277VAC (+/- 10%) / 50-60Hertz
Input Current®	—0.192A @120V —0.100A @230V —0.083A

@277V
Input Power ®| 23W (+/- 1W)
Input PF| >0.98
THD| <20%
Operating Frequency per Energy Star @120V/60Hz| 120Hz
Max Lumen Output @ Full Power®| 2159 lumens @ 4000K / 90 CRI
Dimming Type/Range @120V ONLY| Leading Edge (TRIAC) or Trailing Edge (ELV) /100% — 10%
Beam Angle| 120°
CRI / CCT| 90 / 2700K, 3000K, 3500K, 4000K; 5000K is made to order (MTO)
Operating Temperature Range (ta)| -35 to 50°C / -31°F to 122°F
Maximum Engine Case Temperature (Tc)| L70: Tc max=85°C (185°F) / L90: Tc max=85°C (185°F)
Maximum Lens Temperature| Lens: 90°C (194°F)
Estimated Lumen Maintenance (at Max Tc)| L70= >54,000 hours / L90= >21,000 hours
Color Consistency| Binning per ANSI C78.377-2015 @85°C; 3 SDCM
Overall Size| 6.97″ diameter x 0.71″ H (177.04mm Dia. x 18.03mm H)
Wire Type/ Length| 18AWG / 12″ Black and White wires
LED Quantity| 64 Pcs.
Weight| 195.5g / 0.43Ibs.
Packaging: Master Carton| 24pcs
Maximum Screw Installation Torque| 60in-lb (960in-ozf)
Safety/Compliance| DirectAC Engines: cURus (File # E486778) TATUNV023AxxxxA
DirectAC Retrofit Kits: cULus (File # E486779) TJTUNV023AxxxxB
RoHS Compliant
Dry and Damp Location
IC Over Temperature Control
Energy Star Luminaire 2.1 Listed°
Energy Star Luminaire CSD 0
CEC JA8-2016
RFI/EMI| FCC Part 15B Consumer, EN55015
Input Surge Test| 2.5kV Common and Differential mode (Per ES Ring Wave Test)
Sound Rating / Noise| A / <24 dBA
Percent Flicker / Flicker Index| <25%/ <0.0706
Protective Lens/Enclosure| High Voltage Barrier / 2.5mm Clear Polycarbonate 5VA Flame rated
Lens Transmittance| >92.5%
PCB Material| MCPCB
Warranty| 5 years @85°C (185°F) Tc from the date of manufacture
Electrolytic Capacitor Rating| _ >60,000 hours

See page #4 “Certification Chart” for exact models.
Measured electrical data per UL file

Electrical and Optical Specifications

Color Temperature| DirectAC Engine Part Number| Input Power| Nominal Luminous Flux @ 90 CRI| Engine Efficacy @ 90 CRI
---|---|---|---|---
2700K| TJTUNV023AC927B| 23W| 1981 lumens| 86 lm/W
3000K| TJTUNV023AC930B| 23W| 2057 lumens| 89 lm/W
3500K| TJTUNV023AC935B| 23W| 2083 lumens| 91 lm/W
4000K| TJTUNV023AC940B| 23W| 2159 lumens| 94 lm/W
5000K| TJTUNV023AC950B| 23W| 2210 lumens| 96 lm/W

NOTES:

Nominal luminous flux includes a 7.5% loss due to lens. Use a 1.075 multiplier when lens is removed.
Electrical and optical specifications are based on Tc mod = 25ºC @120V. Reference Amb. Temp. vs Rel. Lum. Flux for other temperatures.
Specifications are subject to change without notice.
Meets CEC Title 24 requirement.
~10% lumen depreciation @277V input.

Thermal Specifications

DirectAC Engine Retrofit Kit (B)

Storage Temperature Range	-40°C (-40°F) to 80°C (176°F)
Operating Ambient Temperature Range (ta)	-35°C (-31°F) to 50°C (122°F)
Maximum Engine Case Temperature (Tc)	L70: Tc max=85°C (185°F)/ L90: Tc

max=85°C (185°F)
Maximum Lens Temperature| 90°C (194°F)

Thermal De-Rating: Tc vs. Luminous Flux

Module Case Temperature (Tc)	Luminous Flux Multiplier
25ºC	1.000
30ºC	0.988
35ºC	0.975
40ºC	0.963
45ºC	0.951
50ºC	0.938
55ºC	0.926
60ºC	0.914
65ºC	0.901
70ºC	0.889
75ºC	0.877
80ºC	0.864
85ºC	0.852
90ºC	0.840
95ºC	0.827
100ºC	0.815

NOTES:

Refer to LED Engine Retrofit Kit Installation Instructions for further detail.
This LED Engine Kit can retrofit any luminaire with a dimension/volume greater or equal to the minimum dimensions shown below and on the Installation Instructions.
This LED Engine Kit can be used with luminaires similar to the one illustrated on the Installation Instructions.

Suitable for surface mounted luminaire with minimum dimensions or volume: 8.5” Dia. x 4.75” H or 173.92 cubic inches

Certification Chart

Energy Star™ TM-21 Calculator Data

Tc Module	Reported L70	Reported L90
50°C	>54,000 Hrs	>54,000 Hrs
100°C	>54,000 Hrs	35,000 Hrs
110°C	>54,000 Hrs	30,000 Hrs
Tc Module	Calculated L70	Calculated L90
---	---	---
50°C	180,000 Hrs	55,000 Hrs
100°C	116,000 Hrs	35,000 Hrs
110°C	99,000 Hrs	30,000 Hrs

Compatible Tested Dimmers

(Contact Fulham for other alternatives)

(TRIAC or ELV Dimmers)

Manufacture	Model	Type
Core	SI061BR-PTA	TRIAC (Leading Edge) Incandescent Analog
Legrand	ADTP703TUM4	Universal
Legrand	RH703PTC	TRIAC (Leading Edge) Incandescent Analog
Legrand	RH703PTUTC	TRIAC (Leading Edge) Incandescent Analog

Leviton

| ****

002-6633-PLW

| TRIAC (Leading Edge) Incandescent Analog
Leviton| DDE06-BLZ| ELV (Trailing Edge)

Leviton

| ****

IPL06-10Z

DirectAC Engine Equivalency Chart

DirectAC Engine/Kit (23W)	CFL
Engine/Kit Part Number	System Wattage
Efficacy	CFL Style
Wattage**	Lumen Output
TJTUNV023AC9xxB	23W
2	39W 36W

2150 lm

| 59 lm/W
Triple| 13W| 3| 39W| 2535 lm| 59 lm/W
18W| 2| 36W| 2040 lm| 56 lm/W
32W| 1| 32W| 2040 lm| 63 lm/W
42W| 1| 42W| 2720 lm| 64 lm/W
Circline T9| ****

32W

| ****

1

| ****

32W

| ****

1500 lm

| ****

46 lm/W

40W| 1| 40W| 1975 lm| 49 lm/W

NOTES:

For reference only, several factors apply.
Emergency systems are not UL classified for field installation.

Flicker Test Data Summary

(Test performed by third party lab using, Lutron S-600P dimmer)

With Dimmer at 100%

100% Light Output Percent Amplitude Modulation

No Filter| 40 Hz| 90 Hz| 200 Hz| 400 Hz| 1000 Hz
24.65%| 0.29%| 1.78%| 23.07%| 23.76%| 23.92%
Measurement Period:| 2.000 sec| Noise:| 20.4 dBA
Recording Interval:| 4.00E-05| Fraction of rated light output:| 100%
Flicker Index:| 0.0706|

With Dimmer at 20%

20% Light Output Percent Amplitude Modulation

No Filter| 40 Hz| 90 Hz| 200 Hz| 400 Hz| 1000 Hz
24.17%| 0.92%| 2.65%| 17.35%| 21.53%| 23.08%
Measurement Period:| 2.000 sec| Noise:| 19.9 dBA
Recording Interval:| 4.00E-05 sec| Fraction of rated light output:| 19%
Flicker Index:| 0.0571|

With Dimmer at Minimum Light Output

Minimum Light Output Percent Amplitude Modulation

No Filter| 40 Hz| 90 Hz| 200 Hz| 400 Hz| 1000 Hz
20.18%| 0.80%| 1.65%| 13.20%| 16.88%| 17.58%
Measurement Period:| 2.000 sec| Noise:| 20.5 dBA
Recording Interval:| 4.00E-05 sec| Fraction of rated light output:| 9%
Flicker Index:| 0.0411|

Battery Backup Option

FHSCP-UNV-6W-L-SD: Emergency LED Driver for Direct AC Engines

Mechanical Drawing

Overall Dimensions

Length| 9.49″ (241.2mm)
Width| 2.43″ (61.9mm)
Height| 1.49″ (37.9mm)

Wiring Diagram

Specification Sheet:

https://www.fulham.com/PDFs/SpecSheets/FHSCP-UNV-6W-L-SD-2020-857-spec.pdf

Mechanical Drawings

(Scale 13 : 20)
Exploded View

Overall Dimensions

Diameter| 6.97” [177.04mm]
Height| 0.71” [18.03mm]
Wire Length

AC Input (Black / White)

| 12” [304.8mm]

Top View

**Side View

**

Color and Binning

Optical Spectrum

NOTES:

The Color and Binning and Optical Spectrum charts are for reference only. For more detailed info, contact factory.
Binning per ANSI C78.377-2015 @ 85°C; 3 SDCM.
The Optical Spectrum values vary depending on product type and color rank.

Guidelines

Reduced Flicker Operation Feature

DirectAC Engine models have added circuitry to help reduce the Flicker when operated on the 50/60Hz power lines.
The Flicker percentage on these models is below 30% when operated at line voltage, per CEC requirement.
Dimming by line voltage devices may increase the Flicker percentage as the power levels are reduced.

Hi-Pot Testing (Caution)

All DirectAC Engine models are Hi-Pot tested on the Fulham production line. We advise NOT to apply AC high voltage Dielectric test to LED products as this may damage the sensitive electronic components as well as the LEDs. Please inspect the connection wires for any nicks or cuts in the insulation during and after installation.

Termination Notes

A luminaire disconnect UL listed connector is included, as part of Fulham’s retrofit kit only, to meet Energy Star requirements.
Use solid wire size 18AWG/12” per pole, rated at max 600V load and 105°C operating temperature.
Strip wires to 11-13mm (0.47in.).
Connector not for multiple use.

For additional information on Wago’s 873 Series Lumi-Nuts® and IDEAL’s 102X connector, please visit:
http://www.wago.com/infomaterial/wago_ebook/51261593/flipviewerxpress.html
https://idealind.com/shop/30-102x.html

Environmental Rating

DirectAC Engines are rated for dry and damp locations.

IC Over Temperature Control

DirectAC Engine models have built in Thermal management, if the unit experiences higher than normal ambient temperatures the circuit by design will reduce the drive current to the LED there by reducing the thermal impact on the LED’s.

Fastening to Luminaire

When installing this LED Engine use screws with a diameter less than 0.13in. [3.4mm]. The LED Engine must be mounted on a flat surface and all mounting holes must be used to ensure good contact between the back side of the LED Engine and the mounting surface. Refer to max specified torque for installation. Suggested screw sizes: #5 or M3 Pan Head screw.
Fulham provides four 6-20 X 5/8” Flat Head Self Drilling Screws, see instruction sheets for further details
During installation process do not remove plastic film backing.

Electrostatic Sensitive Product (ESD)

Fulham LED products should be handled with proper measures to protect against any potential ESD damage.
When servicing, personnel should be ground and direct contact with LED should be avoided.

Thermal Management

Proper thermal management should be employed to ensure life and reliability of product.

Wiring

Intended for 120~277V application ONLY.
Connect the Black wire from the DirectAC Engine to the building/source Line by using the proper connectors or wire nuts.
Connect the White wire from the DirectAC Engine to the building/source Neutral by using the proper connectors or wire nuts.
DirectAC Engine does not need grounding, but the luminaire must be grounded.
Intended to be wired on dedicated lighting branch circuit.
Do not wire on same branch circuit as motors, inductive type loads or heavy machinery which may introduce spikes, noise and other abnormalities onto the Line. Doing so may result in damage to the unit or abnormal lighting conditions.

Part Number Matrix

NOTES:

DirectAC Engines standard model “B” comes with engine and lens.
Specifications are subject to change without notice.
All 90CRI product meets CEC Title 24 requirement
Standard Product offering. (90CRI / 5000K option is made to order with MOQ and lead time.)
LED Engine Retrofit Kit includes mounting hardware, retrofit labels, and installation instructions.

Product Image: 23W DirectAC UNV Round Engine Kit

TJTUNV023AC9xxB

WARNING: Risk of fire and electrical shock. Luminaire wiring and electrical parts may be damaged when drilling for installation of LED retrofit kit. Check for enclosed wiring and components.

WARNING: Cancer and Reproductive Harm.
www.P65warnings.ca.gov
TJTUNV023AC9xxB