ZEBRONICS ZEB-UDAAN 2 2.1 Channel Speaker User Manual

ZEBRONICS ZEB-UDAAN 2 2.1 Channel Speaker

Features

• 2.1 Channel speaker
• Wireless BT/USB/AUX/FM
• LED Display
• Synchronized multi color dancing LED with on/off switch
• Remote control
• Volume, Bass & Treble adjustment
•  Wall mountable

Specifications

Output power (RMS)

• Subwoofer : 20 Watts
• Satellites : 10 Watts x 2
• Total : 40 Watts

Driver size

• Subwoofer : 10.16 cm
• Satellites : 7.62 cm x 2

Impedance

• Subwoofer : 4 ohm
• Satellite : 4 ohm
• Frequency response : 40Hz – 20kHz
• S/N Ratio : ≥ 80dB
• Separation : ≥ 45dB

File format support

• (USB) : MP3
• Line input : 2ch RCA
• Max. supported USB
• memory size : 32GB
• FM frequency range : 87.5 MHz – 108 MHz
• BT name : ZEBRONICS
• BT Range : 10 Meters (without obstacles)
• BT version : 5.1

Product dimension (W x D x H)

• Subwoofer : 150 x 275 x 210 mm
• Satellite : 96 x 95 x 135 mm

Net. weight

• Subwoofer : 2.75 kg
• Satellites : 0.60 kg
• Total : 3.35 kg

Description of the Subwoofer control panel

1.  Mode
2.  Play / Pause
3.  Bass: To Adjust the bass
4.  Volume : To adjust the volume level
5.  Next
6.  Prev.
7. . Treble : To adjust the treble
8.  USB
9.  Light On / Off

Description of the rear side of the subwoofer

AUDIO INPUT (AUX)
STEREO INPUT
These jacks are used to receive the Stereo signal from a CD/VCD/DVD (2 CH) player.
SPEAKER OUTPUT
FRONT L/R
Front channel output terminals

AC POWER
POWER ON and OFF
This turns the power of the speaker on/off. AC/IN(~220V-240V 50/60Hz)
AC power cord.

Unit Operation

1.  First plug the cable of the satellite into the output jack on the rear panel of the woofer, one end of the audio cord into the input jack on the rear panel, the other end into the output jack of the computer or other audio equipment, the power cord into the power supply jack, switch on the unit, LED on the front panel light up, the system starts to work, the default is last working mode.
2.  Rotating the VOLUME knob to adjust the volume, rotating the TREBLE knob to adjust the treble, rotaing the BASS knob to adjust the bas.
3.  When USB device is working, press the PLAY/PAUSE button pause the music, press the PLAY/PAUSE button again to resume music.
4.  When it is in FM mode, long press the PLAY/PAUSE button to search the channel automatically according to local radio conditions. It can save 20 stations at most, after the search has been finished, it plays the first channel saved automatically.
5.  When USB device is working, press the MODE button to cycle through the LINE IN, FM, USB, Bluetooth.
6.  When USB device is working, press the PREV and NEXT button to choose the previous or the next track / channel, Press VOL- and VOL+ button to adust the volume.
7.  When BT mode, you can connect your BT enabled device. Once connected, audio can be streamed via BT from you phone.

Important Notes

•  Make sure that the power supply is proper and never handle the power cord or its plug with wet hands when plugging into, or unplugging from a power socket.
• Ensure that the main power switch is in the “OFF” position before connecting the AC Power cord to the power supply to avoid damage to the system.
• A damaged power cord can be easily cause an electric shock or fire hazard. Never use a power cord if it has been damaged.

Description of the Remote Control

1.  MODE cycle selection Aux – FM – USB – BT
2.  POWER standby (STANDBY) ON/OFF
3.  NEXT: to select the next song in USB or next channel in radio station
4.  PREV: to select the previous song in USB or previous channel in radio station
5.  VOL+: to increase the overall volume
6.  VOL-: to decrease the overall volume
7.  MUTE: Mute
8.  Play/Pause: to play/pause in USB to search automatically in radio station, 20 channels can be saved up at most.
9.  EQ: Normal Pop – Rock – Jazz – Classic – Cou
10.  It scans for all FM stations in Radio mode
11.  REP: to switch between REP ALL and REP 1 modes, when speaker unit starts, the default mode is REP ALL. Once pressed this button mode changes to REP 1.
12.  0 – 9: to select direct in USB/Memory card, to select 10 digits above by consecutively pressing

Safety Precaution

WARNING:
To prevent fire or shock hazard, do not expose the unit to rain or moisture.

• Note: This product is for indoor use only.
  The lightning flash with arrow head symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ” dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
  The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the manual accompanying the product.

Important safety instructions

1.  Read these instructions before using the product
2.  Do not use this speaker unit near water
3.  Clean only with dry cloth
4.  Do not block any ventilation openings, install in accordance with the manufacture’s instructions
5.  do not install near any heat source such as radiators, heat registers, stoves or other devices (including amplifiers) that product heat.
6.  Only use attachments/accessories specified by the manufacturer.
7.  Unplug this speaker unit during lightning storm or when unused for long periods of time.

ISO 9001:2015 Certified Company www.zebronics.com 

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>