FULHAM CTBRCB02JM02 Bluetooth Bridge Lighting Control Kit User Guide

June 6, 2024
FULHAM

FULHAM CTBRCB02JM02 Bluetooth Bridge Lighting Control Kit User Guide

The Fulham Lighting Control Kit provides all of the necessary components to integrate Bluetooth mesh control in luminaires. Out of the box it is ready to be commissioned via the Fulham iOS Bluetooth mesh mobile commissioning application.

CTBRCB02JM02

  • Bluetooth Bridge Lighting Control

Note: The Fulham EliteBlue application is only available on iOS and can be downloaded via the app store.

ELIOPJX00SR

  • Fulham Link External PIR Sensor

ESRPB-W-EO

  • EnOcean Single Rocker Pad

EDRPB-W-EO

  • EnOcean Double Rocker Pad

Getting Started

FIG 5 Getting Started.JPG

Creating a Project

FIG 6 Creating a Project.JPG

Creating an Area / Adding a Zone

FIG 7 Creating an Area or Adding a Zone.JPG

The scenarios assigned to the profiles are:

  • Manual Control: Luminaires are switched on/off manually and dimmed manually with a wall switch.

  • Vacancy Sensing: Luminaires are switched on manually with a wall switch and switched off automatically when no motion is detected.

  • Vacancy Sensing with Daylight harvesting: Luminaires are switched on manually and switched off automatically when no motion is detected or there is sufficient
    daylight available to maintain the defined light level.

  • Occupancy Sensing: Luminaires are switched on automatically when motion is detected and switched off automatically when no motion is detected.

  • Occupancy Sensing with Daylight harvesting: Luminaires are switched on automatically when motion is detected and switched off automatically when no motion
    is detected or there is sufficient daylight available to maintain the defined light level.

-For more information on each Profile visit the link below:
https://www.fulham.com/PDFs/eliteBlue-commissioning-manual.pdf

FIG 8 Creating an Area or Adding a Zone.JPG

FIG 9 Creating an Area or Adding a Zone.JPG

Adding Devices

Setting Up EnOcean Switch Function

FIG 12 Setting Up EnOcean Switch Function.JPG

FIG 13 Setting Up EnOcean Switch Function.JPG

Testing The Settings

  • Insure TEST Section is selected on the upper right hand corner of the screen.
  • This screen allows you to conveniently test the configurations of the zone and provides you the ability to dim the group and individual luminaires.

-For detailed instructions visit the link below:

https://www.fulham.com/PDFs/eliteBlue-commissioning-manual.pdf

Restoring Factory Settings

FIG 15 Restoring Factory Settings.JPG

Fulham Co. Inc.: 12705 South Van Ness Ave., Hawthorne, CA 90250 Tel.: 1-323-779-2980 Fax.: 1-323-754-9060. order@fulham.com www.fulham.com

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

FULHAM User Manuals

Related Manuals