CAL-ROYAL N-F98CVR Concealed Vertical Rod Exit Device Installation Guide
- June 9, 2024
- CAL-ROYAL
Table of Contents
- N-F98CVR Concealed Vertical Rod Exit Device
- TO CHANGE BOTTOM LATCH FOR BOTTOM STRIKE
- INSTALL INNER CHASSIS & TOP LATCH
- INSTALL BOTTOM LATCH (Skip this step if less Bottom Rod)
- INSTALL TOP & BOTTOMSTRIKE (Please Follow TEMPLATE)
- TO CHANGE HAND OF N-F98CVR EXIT DEVICE
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
INSTALLATION INSTRUCTION
N-F98CVR CONCEALED VERTICAL ROD
EXIT DEVICE
N-F98CVR Concealed Vertical Rod Exit Device
TO CHANGE BOTTOM LATCH FOR BOTTOM STRIKE
1. Device factory pre-set.| 2-1.Unscrew and remove screw and L-shaped
bracket.
2-2. The L-shaped bracket moves backward.| 3. Move the L-shaped bracket back
to the (A) screw hole and install and lock it.| 4. Change Done.
---|---|---|---
| | |
INSTALL INNER CHASSIS & TOP LATCH
INSTALL BOTTOM LATCH (Skip this step if less Bottom Rod)
INSTALL TOP & BOTTOMSTRIKE (Please Follow TEMPLATE)
TO CHANGE HAND OF N-F98CVR EXIT DEVICE
1. LHR
| 2-1. Remove chassis pin & main slide & tube.
2-2. Remove lift lever & lift lever pin.
2-3. Rotate 180° main slide & lift lever
---|---
3-1. Reassemble lift lever at opposite side, as shown.
3-2. Replace main slide and chassis pin and lift lever pin. and fixed screw.
| 1. RHR Done.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>