ET2 E42106 Gravity Large Outdoor LED Sconce User Guide

ET2 E42106 Gravity Large Outdoor LED Sconce

Before Getting Started

• Read the instructions carefully prior to assembling the product.
• When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside
• Carefully remove all packaging materials and retain for future use.
• Keep all hardware parts and packaging out of reach of small children.
• Choosea clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
• Ensure that you have all required contents for complete assembly
• Take care when lifting. Assemble the product in close proximity to where you intend to position the item.
• Do not over tighten the screws and bolts as this may damage the threads
• Do not let children playwith this product.

Risk of suffocation!
Keep any packaging materials away from children

Lamp Care Instructions

• Carefully read through the instruction sheet before assembly and using the product
• Caution there is a risk of shock. Disconnect from power source before assembling or cleaning.
• WARNING: Wires need to be connected to driver found in canopy and should not be connected directly to power source or a short may occur.
• Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire
• Do not plug the product in if cord is torn or frayed.

Cleaning & Maintenance

• On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.
• For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish
• Clean with soft cloth and a mild detergent. DO not use abrasive cleaner.
• Periodically (every 90 days) make sure that the screws are fully tightened.
• Prolonged exposure to heat sourcesmay cause glazing, melting and scorching, or even cause color to fade.

Cleaning & Maintenance

• On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.
• For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
• Clean with soft cloth and a mild detergent. DO not use abrasive cleaner.
• Periodically (every 90 days) make sure that the screws are fully tightened.
• Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.

PARTS

INSTALLATION INSTRUCTION

CRITICAL INSTRUCTION

This fixture must be installed with compatible dimmer types only. Improper wiring of fixture and/or use of incorrect dimmers will cause catastrophic failure and void the warranty.

DO NOT ATTEMPT TO CUT FACTORY CONNECTIONS WITHOUT QUALIFIED KNOWLEDGE, MODIFICATIONS MADE TO THIS PRODUCT WITHOUT THE CONSENT OF THE MANUFACTURER WILL VOID WARRANTY.

FOR OPTIMAL USE
THIS FIXTURE HAS BEEN TESTED TO WORK WITH THE BELOW DIMMERS Lutron Diva DVCL- 153P DVELV-300P

IMPORTANT
Make sure that your dimmable LED fixture is paired with the correct dimmer type  Must be installed by a licensed electrician with knowledge of electronic lighting systems

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>