xiamen HPRT L5/L5S Smart Pocket Printer User Guide

HPRT L5/L5S Smart Pocket Printer
User Guide

Packing List

Note: The packing items are actually based on the order.

Using Guide

Power Button Status
Hold down for 2 seconds to ON/OFF

• Lighting: Standby / Charging completed
• Slow flash: Charging / Firmware updating
• Fast flash: Supplies near end, cover open, low battery, the print head is overheated

Charging
Use it for the first time after purchase

• Recommended to use after full charge
• Charge via AC adapter or computer USB port

USB Cable
In addition to the supplied USB cable, you can also use the charging cable of mobile device

• Recommended to use the supplied USB charging cable to charge
• It takes about 90 minutes to charge with 5V/1A

Appearance and Components

1. USB Interface
2. Upper Cover
3.  Power Button

Replace Supplies

• Place printer as shown in figure 1, pay attention to the arrow marked on the printer.
• With reference to figure 2, push down the upper cover.
• When replacing supplies, place the supplies in reference to the direction shown in figure 3.
• If the supplies are properly placed, close the upper cover to the lower cover and push the upper cover back to its original shape.

**** When changing supplies , do not touch the print head in case of injury caused by overheating.

APP Setting
Simple Operation APP Setting

• You can view information such as remaining power, firmware version in device management.

Safety Precautions

Battery Overheating
Battery Management and Precautions

• When charging is completed, please unplug the USB cable.
• To avoid fire, do not charge at high temperature (e.g. sweating rooms, bonfire nearby, etc.).

Burn Hazard
Print Head Overheating

• After printing, do not touch the print head directly in case of injury caused by overheating.

Connection
Scan the QR code below and install the App.
Open the App, click ” Connect Printer” and select the corresponding printer to connect from the list found via Bluetooth.

http://hereprint.hprt.com/app/hereprint

Charger Attention
Print Head Management and Precautions

• There may be damage to the print head due to improper charging.
• We recommend not to use printer in high humidity or dusty areas.

Charging Port Damage
Charging Precautions

•  Please gently insert or unplug the USB cable to prevent excessive damage to the charging port.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>