Alecto SMARTBABY5 Wi-fi Baby Monitor with Camera User Guide
- June 3, 2024
- Alecto
Table of Contents
Alecto SMARTBABY5 Wi-fi Baby Monitor with Camera
WHAT’S IN THE BOX
DESCRIPTION
- Status indicator light
- Power input
- Micro SD card slot
- Speaker
- Microphone
- Reset
INSTALLATION
PLACEMENT
REMOVE DEVICE
GENERAL
- Read and keep the instructions. All the safety and operating instructions should be read before use.
- This device can’t replace responsible adult supervision.
- This device is designed for indoor use only.
- The units should not be exposed to rain or moisture.
- The units should not be exposed to direct heat sources.
- This product is not a toy and should be kept out of children’s reach.
- This product contains small parts, take care when unpacking and assembling the product.
- Children can become entangled in the cords, therefore power cords should be kept more than 1 meter away from the crib and within the baby’s reach at all times.
- The units should only be used with the AC power adapters included in this package (rated 5V; 1.0A).
- Don’t use the units if the cord or plug is damaged.
- Don’t attempt to repair or adjust any of the electrical or mechanical functions of the unit, if you do, the guarantee will be made void.
- This product must not be placed in an enclosed area that may impede the airflow.
ATTENTIE!
- Make sure that the product is within range of the router during the registration.
- The product only supports 2.4GHz WiFi networks.
- As a standard, the sound and motion detection alarms are off. Make sure that you activate the desired notifications immediately after installation.
- The product can only be registered to one account. Make sure you remove the device from the app before changing ownership.
- In the event of a connection problem, you will only receive a message in the app after 30 minutes.
EU DECLARATION OF CONFORMITY
Hereby, Commaxx declares that the radio equipment type SMARTBABY5 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://DOC.hesdo.com/SMARTBABY5-DOC.pdf.
SPECIFICATIONS
- Image Sensor: 1/3’’ 2 Megapixel CMOS
- Shutter: 1/15~1/10,000s
- Min Illuminance: Color 0.01Lux@F2.0 Black/White 0.01Lux@F2.0
- Lens: 3.6mm @F2.0
- Viewing Angle: 100°
- IR distance: Night visibility up to 10m
- Day/Night: Auto (ICR)/Color/B/W
- Effective pixels: 1920(H) x 1080(V) P
- WDR: Digital WDR
- Video Compression: H.264/H.265
- Bit rate: 32Kbps~2Mbps
- Audio input/output: Built-in mic/speaker
- Storage: SD card (max. 128G), Cloud Storage, NVR
- Wireless RF mode frequency band: 2412-2472 MHz
- Transmit Power: < 20 dBm
- Wireless communication protocol: 2.4G WIFI (IEEE802.11 b/g/n)
- Security: User authentication, software encryption
- Alarm Trigger: Intelligent motion detection
- Communication Protocol: HTTP, TCP/IP, DHCP, DNS, RTSP
- Interface Protocol: Private
- Operating System: Android 5.0+ or iOS9.0+
- Operating Temperature: -20˚C to 50˚C
- Dimensions: 80x60x73mm
- Net weight: 78g
- LED light indication: Red solid: Camera network not OK
- Red blinking: Awaiting wifi connection
- Blue solid: Camera running correctly
- Blue blinking: Currently connecting
- Adapter model no.: GTA92-0501000EU
- Manufacturer’s name and address: Dongguan Green Power One Co., Ltd, No.26, Hongyun Street, Chonghe Village, Qingxi Town, Dongguan, 523641 Guangdong, China.
- Input voltage: 100-240VAC
- Input AC frequency: 50/60 Hz
- Output voltage: 5.0V DC
- Output current: 1.0 A
- Output Power: 5.0 W
- Average active efficiency: 74.13 %
- Efficiency at low 10% load: –
- No load Power consumption: 0.1 W
APP FUNCTIONS
- Take screenshot
- Microphone button
- Video recording button
- Playback of recordings on SD card (if available)
- Motion and sound detection settings
- Photo album: storage of screenshots and videos
Commaxx B.V.
Wiebachstraat 37 6466NG Kerkrade The Netherlands
www.alectohome.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>