Chargers 26556 Wireless Charging Pad Instructions
- June 9, 2024
- Chargers
Table of Contents
Chargers 26556 Wireless Charging Pad
Product Information
The Wireless Charging Pad is a device that allows for wireless charging of portable devices that are Qi compatible. The product model is a Wireless Charging Transmitter with a Standard Version of WPC – 1.1. The charging type is one-on-one charge corresponding area, with input specs of 5V 2A and 9V 2A and output specs of 5V 1A and 9V 1.1A. The effective distance for charging is 4 to 6 MM with a conversion efficiency of 70%. This device uses induction model charging with a working frequency of 111.5-205 KHZ. The product comes with a USB cable, Wireless Charging Pad, packing box, and instruction sheet.
Product Usage Instructions
- Connect the wireless charging pad to a power source using the included micro USB cable.
- When the charging pad enters standby mode, the indicator light will flash white.
- Place your portable device in the center area of the charging pad.
- When charging begins, the indicator light will turn solid white. Warning: This wireless charger is designed only for Qi compatible mobile phones. It should not be used with Airpods, Airpod Pros, or other earphones with wireless charging cases. Airpods is a trademark of Apple Inc., registered in the U.S. and other countries.
FCC Statement
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
BOX CONTENT
- USB
- Charging area
- Instruction sheet
Wireless Charger`s Charging Method
- Connect wireless charging pad to a power source via included micro USB cable. When the charging pad enters standby mode the indicator light will flash white.
- Place your portable device in the center area of the charging pad. When charging begins the indicator light will turn solid white.
Product specs
- Product model:
- Main Functions: Wireless Charging Transmitter;
- Standard Version: WPC – 1.1;
- Charging Type: One-on-one charge corresponding area;
- Input Specs: 5V 2A , 9V 2A
- Output Specs: 5V 1A, 9V 1.1A
- Effective Distance: 4 to 6 MM；
- Conversion Efficiency: ≥70%；
- Charging Methods: Induction Model;
- Working Frequency: 111.5-205 KHZ;
- Accessories: USB cable; Wireless charging pad; Packing box, and instruction sheet.
Warning!
- This wireless charger is designed to charge Qi compatible mobile phones. Not for use with Airpods , Airpod Pros or other earphones with wireless charging cases.
- Airpods is a trademark of Apple Inc., registered in the U.S. and other countries
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
This device has been tested and found to comply with the limits for a Class B
digital device,pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This device generates,uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation.If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-
* Reorient or relocate the receiving antenna.- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment
The distance between user and products should be no less 20cm.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>