ET2 E21357-GLD Dorian 48 Inch Linear LED Pendant Instruction Manual
- June 9, 2024
- ET2
Table of Contents
ET2 E21357-GLD Dorian 48 Inch Linear LED Pendant
Product Information: LED Lighting (DC Power)
LED Lighting (DC Power) is a lighting product that uses DC power to provide energy-efficient lighting. The product comes with hardware parts and packaging materials that need to be carefully removed during assembly. The product can be assembled in a clean, level, spacious area, and all required contents for complete assembly should be ensured before starting the assembly process. The lamp care instructions provided with the product need to be followed carefully to ensure safe and efficient usage.
Product Usage Instructions
- Read the instructions carefully prior to assembling the product.
- When opening the package, use a sharp tool like a cutter knife carefully to avoid damaging the components inside.
- Remove all packaging materials carefully and retain them for future use.
- Keep all hardware parts and packaging out of reach of small children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all the required contents for complete assembly.
- Take care when lifting. Assemble the product in close proximity to where you intend to position the item.
- Do not over-tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
- Carefully read through the lamp care instructions before assembly and using the product.
- Disconnect from the power source before assembling or cleaning to avoid the risk of shock.
- Only use the recommended bulb type and do not exceed the maximum wattage as it could cause a fire.
- Do not plug the product in if the cord is torn or frayed.
- Clean with a soft cloth and mild detergent. Do not use abrasive cleaner.
- On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges. For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
- Periodically (every 90 days) make sure that the screws are fully tightened.
- Prolonged exposure to heat sources may cause glazing, melting, and scorching, or even cause the color to fade.
Before Getting Started
- Read the instructions carefully prior to assembling the product.
- When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain them for future use.
- Keep all hardware parts and packaging out of reach of small children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all the required contents for complete assembly.
- Take care when lifting. Assemble the product in close proximity to where you intend to position the item.
- Do not over-tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
- Risk of suffocation!
Keep any packaging materials away from children.
- Risk of suffocation!
CONTENTS
Before getting started ensure the package contains the following components:
CRITICAL INSTRUCTION
Dimmer Compatibility
This fixture must be installed with compatible dimmer types only. Improper
wiring of fixtures and/or use of incorrect dimmers will cause catastrophic
failure and void the warranty.
DO NOT ATTEMPT TO CUT FACTORY CONNECTIONS WITHOUT QUALIFIED KNOWLEDGE, MODIFICATIONS MADE TO THIS PRODUCT WITHOUT THE CONSENT OF THE MANUFACTURER WILL VOID THE WARRANTY.
FOR OPTIMAL USE
THIS FIXTURE HAS BEEN TESTED TO WORK WITH THE BELOW DIMMERS Lutron Diva DVCL-
153P DVELV-300P
IMPORTANT
- Make sure that your dimmable LED fixture is paired with the correct dimmer type.
- Must be installed by a licensed electrician with knowledge of electronic lighting systems.
PRODUCT NAME: Dorian 48″ Linear LED Pendant
ITEM NUMBER: E21357
LAMPING: LED Integrated 21W
Vinput: 120-277V