G3 MINIMIST High Performance Climbing Skins User Manual
- June 9, 2024
- G3
Table of Contents
G3 MINIMIST High Performance Climbing Skins
SKIN TRIMMING
For video instructions & tutorials visit: genuineguidegear.com/g3u
Check sizing.
Adjust the tail strap to ski length.
- Push slack into the center loop.
- Pull tight on the other end.
NOTE
Less skin fabric at the tail = lower weight and increased glide.
Remove release liner.
Attach & center skin.
Align G3 Trimmer Tool With Skin Edge
The tabs on the trim tool should sit between the ski base and the skin fabric.
Trim from tip to tail along the ski edge, repeat on both sides.
Trimmed skins should reveal both edges.
Care + Storage
Keep skin glue clean
Keep skins in a cool, dry place.
Thoroughly scarp and brush excess wax from skin
Do not store your skins on your skis.
Thoroughly dry both sides of your skins.
Use skin savers for long term storage.
WARRANTY
G3 warrants that the product will meet the specification stated in the
instructions and G3 agrees to repair or replace the product free of charge if
the product does not con form to the specifications. Notice for replacement
must be given within 60 days of the discovery of the defect. ALL WARRANTIES OF
MERCHANTABILl1Y OR OF FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXCLUDED
AND/OR WAIVED.
For more warranty information go to
www.genuineguidegear.com
WARNING
Winter backcountry travel is inherently dangerous. There is always the risk of
serious injury or death. You are solely responsible for your actions and
decisions. Familiarize yourself with the use of this product, its limitations
and capabilities. Learn proper skiing techniques, avalanche awareness and
exercise good judgment in conjunction with using this product properly. Use
this equipment and ski at your own risk.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>