ET2 E24219 Stillo 18-Light LED Pendant User Guide
- June 9, 2024
- ET2
Table of Contents
E24219 Stillo 18-Light LED Pendant User Guide
Lamping
I Ampoule: 18 x 1.5W G4LED(Included) Please consuif a qualified electrician
prior to install
Made in China
LED LOW -VOLTAGE INSTRUCTION
Before Getting Started
Read the instructions carefully prior to assembling the product. When you open
the package with a sharp tool like a box knife, be careful not to damage the
components inside. Carefully remove all packaging materials and retain for
future use.
Keep all hardware parts and packaging out of reach or small children.
Choose a cl ean, level, spacious assembly area. Avoid hard surfacesthat may
damage the product.
Ensure that you have all required contents for complete assembly.
Take care when lifting. Assemble the product in close proximity to where you
intend to install it.
Do not over tighten the screws and bolts as this may damage the threads.
Do not let children play with this product.
Risk of suffocation! • Keep packaging materials away from children.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the
product.
Caution there is a risk of shock! Disconnect from power source before
assembling or cleaning.
Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
Only use the recommended bulb type and do not exceed the maximum wattage as it
could cause fire.
Check the product cord to be sure is free torn or frayed.
WARNING: Wires must to be connected to low voltage driver and should not
be connected directly to live wire or a short may occur.
Cleaning & Maintenance
On polished finishes, often using talc powder can reduce the appearance of
fingerprints and other smudges.
For respective shade surfaces, use the appropriate cleansers, i.e. glass
cleaner, stone polish, & wood polish.
Clean with soft cloth and a mild detergent. Do not use abrasive or harsh
cleaners.
Periodically (every 90-180 days) make sure that the screws are fully
tightened.
Prolonged exposure to heat sources may cause glazing, melting and
scorching,oreven cause color to fade.
PARTS
Before getting testamentary sure the package contains the following components:
This fixture is equipped with an LED driver, please refer to Wiring Diagram for more details.
WIRING DIAGRAM
MUST be installed by an experienced professional CRITICAL KNOWLEDGE of
electonic lighting systems required.
IMPROPER WIRING and/or INCORRECT DIMMER use can cause CATASTROPHIC
DAMAGE’
THIS FIXTURE MUST BE INSTALLED with a COMPATIBLE DIMMER SWITCH DO NOT CUT
FACTORY-MADE CONNECTIONS.
VERIFED LIST OF TESTED DRIVERS
Lutron DVCL-153P Lutron DVCL-150P LevIton IPLO6 Leviton 6674
Due to Inrush current wattage should not exceed 150W on a 600W dimmer
© 2023 ET2 CONTEMPORARY LIGHTING
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>