ET2 E24964 Carmen 16 Inch LED Pendant User Guide

June 10, 2024
ET2

ET2 logo Item/Model Number: E24944
Carmen 16″ LED Pendant
User Guide

E24964 Carmen 16 Inch LED Pendant

Ampoule: LED Integrated 7W
Please consult a qualified electrician prior to install
Made in China

Before Getting Started

  • Read the instructions carefully prior to assembling the product.
  • When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
  • Carefully remove all packaging materials and retain for future use.
  • Keep all hardware parts and packaging out of reach or small children.
  • Choosea clean,level, spacious assemblyarea.
  • Avoid hard surfaces thatmay damage the product.
  • Ensure that you have all required contents for complete assembly.
  • Take care when lfting. Assemble the product in dose proximity to where you intend to install it.
  • Donot over tighten the screws and bolts as this may damage the threads.
  • Do not let children play with this product.

Risk of suffocation!
Keep packaging materials away from children.

Lamp Care Instructions

Carefully read through the instruction sheet before assembly and using the product.
Caution thereisa riskof shock!
Disconnect from power source before assembling orcleaning.
Switch off, unplug and allow bulb to cool before replacing bulb o cleaning.
Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
Check the product cord to be sure s free tor or frayed.
WARNING: Wires must to be connected to low Voltage driver and should not be connected directly to live wire or a short may occur.

Cleaning & Maintenance

  • On polished finishes, often using talc powder can reduce the appearance of fingerprints and other smudges.
  • For respective shade surfaces, use the appropriate deansers, i glass cleaner, stone polish, & wood polish.
  • Clean with soft doth and a mild detergent. Do not use abrasive or harsh deaners.
  • Periodically (every 90-180 days) make sure that the screws are fully tightened.
  • Prolonged exposuretoheat sourcesmay cause glazing, meltingandscorching, oreven cause color to fade.

PARTS

Before gettingstarted,ensure the package contains the following components:ET2 E24964 Carmen 16 Inch LED Pendant -
PARTSET2 E24964 Carmen 16 Inch LED Pendant - PARTS
2This fixture is equipped with an LED driver, please refer to the Wiring Diagram for more details ET2 E24964 Carmen 16 Inch LED
Pendant - PARTS 3

WIRING DIAGRAM
DIMMER COMPATIBILITY
MUST be installed by an experienced professional
CRITICAL KNOWLEDGE of electronic lighting systems required
ITEM/MODEL: E24964
IMPROPER WIRING and/or INCORRECT DIMMER use can cause CATASTROPHIC DAMAGE!
THIS FIXTURE MUST BE INSTALLED with a COMPATIBLE DIMMER SWITCH
DO NOT CUT FACTORY-MADE CONNECTIONS. ET2 E24964 Carmen 16 Inch LED Pendant -
voltage InputFOR OPTIMAL USE, VERIFIED DIMMERS INCLUDE
Lutron Diva DVCL 153p
Lutron Diva DVELV-300P
DEAKO-Smart Dimmer
DEAKO-Single Dimmer
Lutron Caseta PD-6WCL
Leviton 6672-L
Eaton DALOGP
NOTE: Triac & ELV dimming is ONLY compatible at 120V
IMPORTANT!
If the control isnslt p;ired properly to LED fixtures, irreparable damage may occur.
If the dimmer you are using is not listed here, consult a lighting professional or view our Dimming Compatibility Chart online: www.et2online.com

© 2023 ET2 CONTEMPORARY LIGHTING

Documents / Resources

| ET2 E24964 Carmen 16 Inch LED Pendant [pdf] User Guide
E24964 Carmen 16 Inch LED Pendant, E24964, Carmen 16 Inch LED Pendant, 16 Inch LED Pendant, LED Pendant, Pendant
---|---

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

ET2 User Manuals

Related Manuals