Panasonic CZ-RL511D Infrared Remote Control User Manual

CZ-RL511D Infrared Remote Control

Product Information

Wireless Remote Control CZ-RL511D

The Wireless Remote Control CZ-RL511D is a device that allows you to control your air conditioning unit from a distance. It has several features such as clock setting, basic operation, energy-saving temperature setting, and auto- restart control. It also has a troubleshooting function that enables you to retrieve error codes.

Safety Precautions

• Remove batteries if the unit is not going to be used for a long period of time.
• New batteries of the same type must be inserted following the polarity stated.

Quick Guide

• A: Press to restore the remote control to default setting. Not used in normal operations. (Technical / Service Configuration use)
• B: Insert AAA or R03 batteries.

Product Usage Instructions

Inserting the batteries

1. Pull out the back cover of remote control.
2. Insert AAA or R03 batteries.
3. Close the cover.

Clock setting

1. Press and set the time.
2. Press and hold for approximately 5 seconds to show time in 12-hour (am/pm) or 24 hour indication.
3. Confirm.

Basic operation

1. Press to start/stop the operation.
2. Press to select the desired mode: AUTO, HEAT, DRY, COOL.
3. Select the desired temperature by pressing for approximately 10 seconds.

To adjust fan speed

Press either or to select the desired fan speed.

To reach temperature quickly

Press for approximately 10 seconds to activate the power boost mode.

To enjoy quiet operation

Press to activate the quiet mode.

To set the timer

1. Press .
2. Set the time.
3. Press or to select respective ON or OFF.
4. Press or to select respective hour and minutes.
5. Confirm.

Energy saving temperature setting

Press to activate the energy-saving mode.

Auto restart control

The unit automatically restarts after a power failure with the previous settings.

Troubleshooting

If the remote control does not work, check if the unit receives the signal from the remote control. To retrieve error codes, follow these steps:

1. Press for 5 seconds.
2. Press until you hear a beep sound, then write down the error code.
3. Press for 5 seconds to quit checking.
4. Turn the unit off and reveal the error code to an authorized dealer.

Information for Users on Collection and Disposal of Old Equipment and

Used Batteries

Dispose of old equipment and used batteries properly according to local laws and regulations.

Product Safety precautions

• Do not allow infants and small children to play with the remote control to prevent them from accidentally swallowing the batteries.
• Do not use rechargeable (Ni-Cd) batteries. It may damage the remote control.
• To prevent malfunction or damage of the remote control:
  • Remove the batteries if the unit is not going to be used for a long period of time.
  • New batteries of the same type must be inserted following the polarity stated.

Quick Guide

Inserting the batteries

1. Pull out the back cover of remote control.
2. Insert AAA or R03 batteries.
3. Close the cover.

A: Clock setting

1. Press CLOCK and set the time ∧ ∨ .
   • Press CLOCK and hold for approximately 5 seconds to show time in 12-hour (am/pm) or 24 hour indication.
2. Confirm SET.

B: Basic operation

1. Press to start/stop the operation.
2. Press  MODE  to select the desired mode.
3. Select the desired temperature.
   Selection range: 16.0 °C ~ 30.0 °C / 60 °F ~ 86 °F.

• Press and hold ∨ for approximately 10 seconds to switch the temperature indication in °C or °F.

How to use

To adjust fan speed

• For AUTO, the indoor fan speed is automatically adjusted according to the operation mode.

To reach temperature quickly

• POWERFULL
  This operation stops automatically after 20 minutes.

To enjoy quiet operation

• QUIET
  This operation reduces airflow noise.

Note
POWERFULL, QUIET

• Can be activated in all modes and can be cancelled by pressing the respective button again.

To set the timer
2 sets of ON and OFF timers are available to turn ON or OFF the unit at different preset time.

1. Select ON or OFF timer

   • Each time pressed:

2. Set the time

3. Confirm

Example: OFF at 22:00

• To cancel ON or OFF timer, press TIMER ON or  TIMER OFF to select respective or then press CANCEL .
• To cancel ON and OFF timer, press CANCEL ****.
• If timer is cancelled manually or due to power failure, you can restore the timer again by pressing TIMER ON or  TIMER OFF to select respective or then press SET .
• The nearest timer setting will be displayed and will activate in sequence.
• Timer operation is based on the clock set in the remote control and repeats daily once set.
  For clock setting, please refer to the Quick guide.
  When wired remote control is in operation, the timer setting from wireless remote control will be cancelled.

To learn more…

Operation mode

• It is possible to operate the indoor units individually or simultaneously. The priority of operation is placed on the first unit that turned on.

• During operation, HEAT and COOL modes cannot activate at the same time for different indoor units.

• The power indicator blinks to indicate the indoor unit is standing by for different operation mode.
  AUTO : During operation, the POWER indicator will blinks at initial.
  Single

  • Unit selects operation mode every 10 minutes according to the setting and room temperatures.

• Multi

  • Unit selects operation mode every 3 hours according to setting temperature, outdoor temperature and room temperature.
    HEAT : The POWER indicator blinks at the initial stage of this operation. Unit takes a while to warm up.
    COOL : Provides efficient comfort cooling to suit your needs.
    DRY : Unit operates at low fan speed to give a gentle cooling operation.

Energy saving temperature setting
Operating the unit within the recommended temperature range may save energy.

• HEAT : 20.0 °C ~ 24.0 °C / 68 °F ~ 75 °F.
• COOL: 26.0 °C ~ 28.0 °C / 79 °F ~ 82 °F.

Auto restart control
If power is resumed after a power failure, the operation will restart automatically after a period of time with previous operation mode and airflow direction.

•  This control is not applicable when TIMER is set.

Troubleshooting

Check the following before calling for servicing.

Remote control does not work.
(Display is dim or transmission signal is weak.)|

• Insert the batteries correctly.
• Replace weak batteries.

The unit does not receive the signal from the remote control.|

• Make sure the receiver is not obstructed.
• Certain fluorescent lights may interfere with signal transmitter. Please consult authorized dealer.

How to retrieve error codes
If the unit stops and the TIMER indicator blinks, use the remote control to retrieve the error code.

•  For certain errors, you may restart the unit for limited operation if there are 4 beeps when operation starts.

Information

Information for Users on Collection and Disposal of Old Equipment and Used Batteries

These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.
By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
Pb
[Information on Disposal in other Countries outside the European Union] These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved.

Panasonic Corporation
1006 Kadoma, Kadoma City, Osaka, Japan
Website: http://www.panasonic.com
© Panasonic Corporation 2019
Printed in China

Authorised representative in EU Panasonic Testing Centre
Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany

AEEE Compliance with Turkey Regulations AEEE Yönetmeliğine Uygundur
BU ÜRÜNÜN KULLANIM ÖMRÜ 10 YILDIR

References

• Panasonic Australia | Air Con | Cameras | Home Appliances

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>