AXAGON CRE-DAC SuperSpeed microSD Mini Card Reader Instruction Manual
- June 10, 2024
- AXAGON
Table of Contents
INSTRUCTIONS FOR USE (original)
CRE-DAC SUPERSPEED USB-C & USB-A
SD/microSD MINI CARD READER
CRE-DAC SuperSpeed microSD Mini Card Reader
Turn on computer.
Plug the card reader to the USB port of the computer or phone.
An automatic installation will be performed.
No need to install any external drivers.
The memory card reader is ready to use.
HOW TO INSERT CARDS
INSERT THE CARDS WITH THE TOPS APART.
SUPPORTED CARDS
CARD TO CARD DIRECT COPY **
CONNECTION TO PC & NOTEBOOK
CONNECTION TO PHONE &
NOTEBOOK** 
**INPUT INTERFACE
**
USB 3.2 Gen 1 (USB 3.0) – USB 2.0
Backward compatible USB 2.0
Supported speeds 5000 / 480 Mbit/s (Super / High Speed) USB Type-C male
connector & USB Type-A male connector
OUTPUT INTERFACE
2-slot USB 3.2 Gen 1 card reader
SD v1.0 /v1.1/ v2.0 / v3.0 (UHS-I)
SDHC <32GB / SDXC <2TB
MMC v3.x / v4.0 / v4.1 / v4.2 / v4.3 / v4.4
2 LUN – card to card direct copy
OTHER FEATURES
Plug & Play – Hot Plug – Hot Swap
automatic installation
power through USB bus
LED INDICATION
the LED indicates inecontin of the card reader to the power supply
(lightning and data transfer (blinking).
0S SUPPORTED
WINDOWS XP – Vista-7-8+8.1- 10-11 &later Server 2008 + 2012 + 2016 + 2019
– 2022 & later 32 & 64bit versions supported 0S X 10.x & later Linux 2.6.x &
later Android
TECHNICAL SUPPORT: More information, FAQs, manuals and drivers can be
found on the product page in the PRODUCT SUPPORT tab at
www.axagon.eu.
Nothing helped? Write to our technical support:
support@axagon.cz.
At the end of its service life, do not throw the product into household
waste; take it to a collection point for electrical equipment recycling. For
information about collection and recycling programmes in your country, contact
your local authorities or the retailer who sold you the product.
EU declaration of conformity: The device complies with the harmonisation
legislation of the European Union 2014/30/EU (EMC) and 2011/65/EU (RoHS).
The complete EU declaration of conformity is available from the manufacturer.
**** Before using the product, the user is obliged to read the user
instructions. The manufacturer disclaims any liability for damage that may
occur due to improper use of the product or failure to follow the instructions
contained herein. Product use other than specified must be consulted with the
manufacturer.
Do not use the product in humid or explosive environments and near flammable
substances.
http://www.axagon.eu/produkty/cre-dac#supportLinkGoal
Two-slot SuperSpeed USB memory card reader
© 2022 AXAGON
Vyrobce / Manufacturer: RealQ s.r.o. – Zeleznd 5,619 00 Brno, Czech
Republic
All rights reserved. All text and pictorial materials contained in this
document are protected by Copyright Act.
All marks indicated here are the registered trademarks of their appropriate
owners.
Specifications are subject to change without prior notice.
Made in CHINA for Axagon.
Documents / Resources
|
AXAGON CRE-DAC SuperSpeed microSD Mini Card
Reader
[pdf] Instruction Manual
CRE-DAC, CRE-DAC SuperSpeed microSD Mini Card Reader, SuperSpeed microSD Mini
Card Reader, microSD Mini Card Reader, Mini Card Reader, Card Reader
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>