ET2 E22096 Fiori 28-Light Pendant Instruction Manual
- June 10, 2024
- ET2
Table of Contents
E22096 Fiori 28-Light Pendant
Instruction Manual
Please consult a qualified electrician for hanging fixture and wiring.
Light source: 28 x G9 25W Bulb(Included)
Before Getting Started
- Read the instructions carefully prior to assembling the product.
- When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain for future use.
- Keep all hardware parts and packaging out of reach of small children.
- Choose a clean, level, spacious assembly area.
- Avoid hard surfaces that may damage the product.
- Ensure that you have all required contents for complete assembly.
- Take care when lifting. Assemble the product in close proximity to where you intend t o position the item.
- Do not over tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
Risk of suffocation!
Keep any packaging materials away from children.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the
product.
Caution there is a risk of shock. Disconnect from power source before
assembling or cleaning.
CAUTION: Xenon bulbs get very hot and may burn you. Always make sure bulbs
are off for a minimum of 10 minutes before handling. Fixture may be dimmed
using an electronic low voltage dimmer.
Only use the recommended bulb type and do not exceed the maximum wattage as it
could cause fire.
Do not plug the product in if cord is torn or frayed.
Cleaning & Maintenance
- On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.
- For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
- Clean with soft cloth and a mild detergent. DO not use abrasive cleaner.
- Periodically (every 90 days) make sure that the screws are fully tightened.
- Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.
Contents
Before getting, started, ensure the package contains the following
components:
Screw Collar Loop
- Remove mounting bracket from fixture and install to electrical box.
- Install top loop A to center stem and attach appropriate amount of chain to loop to achieve desired mounting height. Thread wire through every 3rd loop of chain.
- Remove ring from loop and slide down chain. Place canopy onto chain and let slide to top of fixture. Install nipple and cross bar into top of chain loop.
- Wire fixture to wires in outlet box. Copper wire is for Ground. Pull canopy through screw ring up chain to ceiling and tighten securely.
Made in china
Documents / Resources
| ET2
E22096 Fiori 28-Light
Pendant
[pdf] Instruction Manual
E22096 Fiori 28-Light Pendant, E22096, Fiori 28-Light Pendant, Light Pendant
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>