CREATE MATT 800W American Style Jug Blender User Manual

June 10, 2024
CREATE

CREATE MATT 800W American Style Jug Blender

Thank you for choosing our blender. Before using the appliance, and to ensure the best use, carefully read these Instructions.
The safety precautions enclosed herein reduce the risk of death, injury and electrical shock when correctly adhered to. Keep the manual in a safe place for future reference, along with the completed warranty card, purchase receipt and package. If applicable, pass these instructions on to the next owner of the appliance. Always follow basic safety precautions and accident prevention measures when using an electrical appliance.
We assume no liability for customer failing to comply with these requirements.

SECURITY INSTRUCTIONS

  • When using any electrical appliance, basic safety precautions should always be observed.
  • Read all use instructions thoroughly before using this product.
  • Blades are very sharp, handle with care. Please pay attention when handling the sharp cutting blades during cleaning, emptying the bowl and user maintenance.
  • When cleaning the appliance please use a dry cloth, do not use water to clean the motor base, it may cause a potential injury from misuse.
  • Always switch off the product and disconnect from the supply If it Is Left unattended and before assembling, disassembling, cleaning or approaching parts that move while in use.
  • Do not Immerse the product or allow t he supply cord and pl.ug come Into contact with water or other liquid.
  • This appliance is designed for normal household use only.
  • Keep this appliance out of the reach of children.
  • Your voltage must correspond to the voltage printed on the type plate located on the bottom of the motor housing. When connecting to an outlet, the motor must always be turned off (switch at OFF position).
  • This appliance will not work without the jug or mill accessory in place on the motor housing.
  • Before switching on, make sure the jug is properly assembled and in place on the motor housing with the lid on.
  • Do not use without any load in the jug (e.g. solid or liquid ingredients).
  • Do not place hot ingredients (over 60 °C) in the jug.
  • Keep hands and utensils out of the container while blending to reduce the risk of severe injury to persons or damage to the blender. A scraper may be used but must be used only when the blender is not running.
  • If the supply cord is damaged, it must be replaced by a special cord from the manufacturer or Its service agent.
  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance In a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

PARTS LIST

Parts List

  1. Measuring Lid
  2. Jar
  3. Sealing ring
  4. Blender blade assembly
  5. Retainer
  6. Main unit
  7. Lamp ring
  8. Switch bracket
  9. Knob
  10. Bottom cover
  11. Rubber feet

BEFORE USE

  • Clean all parts before using your appliance for the first time.
  • Uncoil amount of cord needed from cord storage at the bottom of the motor housing and connect to an outlet.
JAR ASSEMBLY
  • Position the ring onto the rim of the blade.
    Caution: the blade is very sharp, handle with care.

  • Carefully place the blade assembly into the retainer ring.

  • Screw the jug securely into the retainer ring.

ATTACHING THE JAR
  • Make sure that the switch is on the OFF position.
  • Place the jar on the motor housing and push it down until it is securely locked into place.

BLENDING

  1. Put the food to be processed into the jar.

  2. Place the lid firmly on the jar. Insert the stopper into the lid opening and turn it clockwise to lock.

  3. Plug In, then turn the motor housing on.
    ● Speeds:
    ● 1 – Light applications with liquid ingredients.
    ● 2 – Thicker consistency, mixing both liquids and solid ingredients.
    ● Pulse – Instant power burst (hold the switch in pulse position or turn it to pulse position repeatedly).

  4. After use, always turn the switch to the OFF position and unplug the mot or housing.

  5. To remove the jar, lift it straight up; there is no need to twist it.

  6. To remove the jar, lift it straight up; there is no need to twist it.

PRACTICAL HINTS

  • For best pureeing results when using solid ingredients, feed small portions into the jar gradually rather than adding a large quantity at one time.
  • Cut up into small pieces (2-3 cm).
  • Always start by mixing solid ingredients with a small amount of liquid. Then gradually add more liquid through the opening in the lid.
  • Always operate the unit with your hand positioned on the top.
  • Be careful with hot liquids.
  • When preparing mayonnaise, oil may be added through the drip holes in the lid without removing the stopper.
  • We recommend that you use the pulse mode when mixing solid or highly viscous ingredients to avoid the blade becoming stagnant.
APPLICATIONS FOOD SPEED TIME PREPARATION
Blending All Liquids, drin ks. warm soups 1 40 – 60 sec
Pureeing Vegetables, fruit , sauces, baby

food

| 2| 1.5 – 2 min| 2 cm pieces
Mixing| Pancake batter Yogurt based drinks and

desserts

| 1-2| l min

1.5 – 2 min

|
Emulsifying| Mayonnaise| 2| 1.5 – 2 min|
Crushing| Ice (100g)| Pluse| 20 sec|

CLEANING

Do not immerse the motor housing in water. Wipe clean with a damp cloth only.
After emptying the jar, fill it with water. Place it on the motor housing and turn the switch to the “pulse/clean” setting several times.
Empty the jar and rinse clean.
Make sure the jar is empty before you unscrew the fastener ring. Exercise caution when handling the blade.
After washing up the parts, rinse them with clean water and dry them thoroughly.

In compliance with Directives: 2012/19/EU and 2015/863/EU on the 19Striction of the use of dani!erous substances.
In electric and electronic equipment as well as their waste disl)OSa(. The symbol with The crossed dustbin shown on the package indicates that the product at the end of its service life shall be collected as separate waste. therefore, any products that have reached the end of their useful life must be ~n to waste disposal centers specializing in separate collection of waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment on a one for one basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposed of In an environmentally compatible possible negative effects on the environment and health and optimises the recycling and reuse of components making up the apparatus. AbusiVe disposal of the product by the user Involves application of the administrative sanctions according to the laws.

Symbols.png
CREATE Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals