goobay 58531 Double Monitor Mount with Gas Spring User Manual

: June 9, 2024
: goobay

goobay 58531 Double Monitor Mount with Gas Spring

goobay-58531-Double-Monitor-Mount-with-Gas-Spring-
PRODUCT

Product Information

Features

Tiltable, rotatable, and swivelling table monitor holder with gas pressure spring
Can mount two screens up to 9 kg each
Distance between threaded holes according to VESA standard (vertical x horizontal) is 75×75, 100×100
Suitable for screen sizes from 43 – 81 cm (17 – 32)
Comes with required tools and user manual

PRODUCT Intended Use

The product is intended to be used only in dry interior rooms for mounting two screens up to 9 kg each. Using the product in any other way than described in the product manual or not adhering to the safety instructions may result in fatal accidents, injuries, and damages to persons and property.

Product Usage Instructions

Before starting the installation, read the entire user manual carefully and ensure that you have all the necessary tools (refer to Tab. 2) and parts (refer to Tab. 1).
Unpack the spring arm with monitor mount (A) (refer to Fig. 1) by cutting the cable tie around the spring arm slowly and carefully to avoid any injury from stored energy.
Select a suitable location to mount the product. The product can be mounted on a Tischplatte with a thickness of 10-83 mm (refer to Figs. 2-6).
To mount the product on a Tischplatte, follow the steps below:
Attach the plate for screw clamp (B) to the screw clamp (C) using the two M6x10 screws (E).
Place the screw clamp in the desired location on the Tischplatte.
Use the M6x12 screw (D) to attach the screw clamp to the Tischplatte.
Insert the spring arm with monitor mount (A) into the plate for screw clamp (B) and secure it using the mounting screw (G).
Adjust the position of the monitors by tilting, rotating, and swivelling them to your desired position. Use the wing nut (I), the Allen key 4 mm (J), and the Allen key 6 mm (K) to adjust the position of the spring arm with monitor mount (A) as required.
Once you have set up the product, double-check all screws and connections to ensure that they are tight and secure.

PRODUCT Maintenance, Storage, and Transport Instructions

Regularly check the product’s screws and connections to ensure that they are tight and secure. If necessary, tighten them. Store and transport the product in its original packaging to prevent any damage.

PRODUCT Disposal Instructions

Dispose of the product according to your local regulations.

PRODUCT Warranty

Refer to www.mygoobay.com for detailed warranty conditions.

Safety instructions

The user manual is part of the product and contains important information for correct use.

Read the user manual completely and carefully before use. The user manual must be available for uncertainties and passing the product.
Keep this user manual.
Do not modify product and accessories.
Use product, product parts and accessories only in perfect condition.
In case of questions, defects, mechanical damage, trouble and other problems, non-recoverable by the documentation, contact your dealer or producer.

Not suitable for children and persons with physical and/or mentally limited abilities

Secure packaging, small parts and insulation against accidental use.
Mounting, dismounting, care, storage, transport and disposal may only be carried out by users with basic mechanical knowledge.
Have maintenance and repair work carried out by qualified personnel only.
Avoid stresses such as heat and cold, moisture and direct sunlight vibration and mechanical pressure.
Place, install and transport product, product parts and accessories in a safe way.
When working with burdens, secure yourself and the working place, let a second person help you.
Do not install the product to places with direct sunlight or bright light. This contributes to eye fatigue.
Do not hold limbs between shear parts during use.

Moving product parts can pinch or squeeze limbs

Keep enough space around product and to the whole system to ensure proper ventilation and mobility.
Compare the specifications of all products used.

The specifications of all used products must match or be within the specified range

The supporting surfaces must be able to safely withstand the weight of the mount and the equipment attached to it.

Use the mounting screws provided.
Do not over-tighten the screws.
Threads can be damaged.

Description and Function

Product

The product is a tiltable, rotatable and swivelling table monitor holder with gas pressure spring for mounting two screens up to 9 kg each.

Scope of Delivery

goobay-58531-Double-Monitor-Mount-with-Gas-Spring-
FIG-1

Spring arm with monitor mount (A)
Plate for screw clamp (B)
Screw clamp (C)
M6x12 (D)
M6x10 (E)
Insert (F)
Mounting screw (G)
Insert (H)
Wing nut (I)
Allen key 4 mm (J)
Allen key 6 mm (K)
M4x12 (M-A)
M5x12 (M-B)
Washer D5 (M-C)
User Manual

Required Tools

goobay-58531-Double-Monitor-Mount-with-Gas-Spring-
FIG-2

Drill (1)
Suitable drill bit (Ø 10,0 mm) (2)

Specifications

Item No.	58531
Screen size	43 – 81 cm (17 – 32“)
Load capacity	9 kg each

Distance between threaded holes according to VESA standard (vertical x horizontal)| 75×75, 100×100
Dimensions (width x max. height) / Weight| 117 x 498 mm / 4 kg
Tilt range| -45° ~ +70°
Swivel range / Rotation range| -180° ~ +180°

Intended Use

We do not permit using the device in other ways like described in chapter „Description and Function“ or in the „Safety Instructions“. Use the product only in dry interior rooms. Not attending to these regulations and safety instructions might cause fatal accidents, injuries, and damages to persons and property.

Preparation

Check the scope of delivery for completeness and integrity.

Mounting

Unpacking the spring arm with monitor mount

goobay-58531-Double-Monitor-Mount-with-Gas-Spring-
FIG-3

WARNING: Risk of injury from stored energy!

The spring arms are under pressure and can suddenly extend if released too quickly. Unpack the spring arms one by one.

Hold the spring arm fi rmly together on both sides and have another person cut the cable tie around the spring arm.
Slowly release the pressure and let the spring arm extend gradually to its full length.

Mounting on a table top

goobay-58531-Double-Monitor-Mount-with-Gas-Spring-
FIG-4

Preparation: See Fig. 2.
Table top 10-53 mm:
Table top 50-83 mm: See Fig. 4.

Mounting through a hole in the table

Preparation: See Fig. 5.
Tischplatte 10-83 mm: See Fig. 6.

Attaching the monitor mount to the screen

goobay-58531-Double-Monitor-Mount-with-Gas-Spring-
FIG-8

This step must be carried out by 2 people!

Balancing the spring arm

goobay-58531-Double-Monitor-Mount-with-Gas-Spring-
FIG-9

_ CAUTION: _Material damage!

Always keep the spring arm in a horizontal position when making adjustments.
If necessary, have another person help you.
The spring arm must be properly balanced after the screens have been attached.
Hold the spring arm in a horizontal position and adjust the spring tension with the Allen key (K).
Do not overtighten the screws!

If the spring arm sinks, turn the adjustment screw counterclockwise until it remains in a horizontal position.
If the spring arm rises, turn the adjustment screw clockwise until it remains in a horizontal position.

Using the cable glands

goobay-58531-Double-Monitor-Mount-with-Gas-Spring-
FIG-10

Adjusting the screen

goobay-58531-Double-Monitor-Mount-with-Gas-Spring-
FIG-11

Set the desired angle and then tighten the screws alternately.

Maintenance, Care, Storage and Transport

Let maintenance and repair work only be carried out by qualified personnel.
Protect the joints from dirt and grease them regularly with light machine oil.
Only use a dry and soft cloth for cleaning.
Use caution when cleaning to avoid scratches. In case of heavy soiling, the cleaning cloth can be slightly moistened with water.
Do not use detergents or chemicals.
Regularly check the tightness of product/screws. Fixing holes can remain visible when the product is removed. After prolonged use, a stain may remain on the underground.
Store the product out the reach of children and in a dry and dust-protected ambience when not in use.
Keep and use the original packaging for transport.

Disposal instructions

This product does not belong into the household waste. At the end of its working life, give it back to the manufacturer, the sales outlet or established for this purpose, public collection points for free. Details of disposal are regulated by the respective country‘s law. Recyclables are into the recycle circuit, in order to gain new raw materials. The following recyclable materials are collected in municipal collection: Waste glass, plastics, scrap metal, sheets and much more. With this type of scrap usage you are making an important contribution to protecting our environment.