goobay 58528 Monitor Mount Single Flex User Manual

goobay 58528 Monitor Mount Single Flex

Product Information: Monitor Mount Single Flex

The Monitor Mount Single Flex is a tillable, rotatable, and swiveling table monitor mount suitable for attaching screens up to 8kg. It comes with an arm piece, stand, screw clamp, monitor mount, cable gland, cover, screw, fixing screw, Allen key 4mm, Allen key 6mm, and various screws and washers as mentioned in Tab. 1 and Tab. 2. It is designed to be used only in dry interior rooms and should not be used in any other way than described in the user manual.

The product dimensions are 114 x 454 x 498 mm and the weight is 2.54 kg. It is compatible with screens having a size range of 43 – 81cm (17 – 32) and distance between threaded holes according to VESA standard (vertical x horizontal) of 75×75 or 100×100.

Before using the product, please read the safety instructions and user manual carefully.

Product Usage Instructions: Monitor Mount Single Flex

Step 1: Safety Instructions

Read the safety instructions carefully before using the product. Use the product only in dry interior rooms and not in any other way than described in the user manual.

Step 2: Preparation

Refer to Fig 1, Fig. 2, and Fig. 3 for preparing the monitor mount before installation.

Step 3: Mounting

Refer to Fig 4, Fig. 5, Fig. 6, Fig. 7, Fig. 8, and Fig. 9 for mounting the monitor on the mount and adjusting it.

1. Insert the cover into the stand (Fig. 1).
2. Mount the screw clamp on the stand and attach it to the table top (Fig. 2).
3. Mount the arm piece on the stand and attach the cable glands (Fig. 3).
4. Attach the monitor mount to the screen (Fig. 4).
5. Install and secure the monitor mount with the help of another person (Fig. 5 and Fig. 6).
6. Use the cable glands for cable management (Fig. 7 and Fig. 8).
7. Adjust the screen by tilting, rotating, and swiveling it as per requirement (Fig. 9).

Step 4: Maintenance, Care, Storage, and Transport

Refer to the user manual for instructions on maintenance, care, storage, and transport.

Step 5: Disposal Instructions

Refer to the user manual for instructions on proper disposal of the product.

Table 1.

(A)| | 1x
---|---|---
(B)| **| 1x
(C)| | 1x
(D)| | 1x
(E)| | 1x
(F)| | 2x
(G)| **| 1x
(H)| **| 3x
(I)| **| 1x
(J)| **| 1x
(K)| **| 1x
(M-A)| **| 4x
(M-B)| **| 4x
(M-C)| **| 4x
(M-D)| **| 4x
(M-E)| | 4x
(M-F)| | 4x

Tab. 2

Safety instructions

The user manual is part of the product and contains important information for correct use.

• Read the user manual completely and carefully before use.
  The user manual must be available for uncertainties and passing the product.

• Keep this user manual.

• Do not modify product and accessories.

• Use product, product parts and accessories only in perfect condition.

• In case of questions, defects, mechanical damage, trouble and other problems, non-recoverable by the documentation, contact your dealer or producer.

Not suitable for children and persons with physically and/or mentally limited abilities.

• Secure packaging, small parts and insulation against accidental use.

• Mounting, dismounting, care, storage, transport and disposal may only be carried out by users with basic mechanical knowledge.

• Have maintenance and repair work carried out by qualified personnel only. Avoid stresses such as heat and cold, moisture and direct sunlight vibration and mechanical pressure.

• Place, install and transport product, product parts and accessories in a safe way.

• When working with burdens, secure yourself and the working place, let a second person help you.

• Do not install the product to places with direct sunlight or bright light.
  This contributes to eye fatigue.

• Do not hold limbs between shear parts during use.
  Moving product parts can pinch or squeeze limbs.

• Keep enough space around product and to the whole system to ensure proper ventilation and mobility.

• Compare the specifications of all products used.
  The specifications of all used products must match or be within the specified ran-ge.
  The supporting surfaces must be able to safely withstand the weight of the mount and the equipment attached to it.

• Use the mounting screws provided.

• Do not over-tighten the screws.
  Threads can be damaged.

Description and Function

Product
The product is a tiltable, rotatable and swivelling table monitor mount for attaching screens up to 8 kg.

Scope of Delivery
See Tab. 1.

• Arm piece (A)
• Stand (B)
•  Screw clamp (C)
•  Monitor mount (D)
• Cable gland (E)
• Cable gland (F)
• Cover (G)
• Screw (H)
• Fixing screw (I)
• Allen key 4 mm (J)
• Allen key 6 mm (K)
• M4x12 (M-A)
• M4x16 (M-B)
• M5x12 (M-C)
• M5x16 (M-D)
•  Washer D5 (M-E)
• Spacer (M-F)
• User Manual

Required Tools
See Tab. 2.

Specifications

Distance between threaded holes according to VESA standard (vertical x horizontal)| 75×75, 100×100
Dimensions (width x depth x height) / Weight| 114 x 454 x 498 mm / 2.54 kg
Tilt range| -45° ~ +45°
Swivel range| -90° ~ +90°
Rotation range| -180° ~ +180°

Intended Use

We do not permit using the device in other ways like described in chapter „Description and Function“ or in the „Safety Instructions“. Use the product only in dry interior rooms. Not attending to these regulations and safety instructions might cause fatal accidents, injuries, and damages to persons and property.

Preparation

• Check the scope of delivery for completeness and integrity.

Mounting

Inserting the cover into the stand
See Fig 1.

Mounting the screw clamp on the stand and attaching it to the table top
See Fig. 2.

Mounting the arm piece on the stand and attaching the cable glands
See Fig. 3.

Attaching the monitor mount to the screen
See Fig. 4.

Installing and securing the monitor mount
See Fig. 5 and Fig. 6.
This step must be carried out by 2 people!

Using the cable glands
See Fig. 7 and Fig. 8.

Adjusting the screen
See Fig. 9.

Maintenance, Care, Storage and Transport

•  Let maintenance and repair work only be carried out by qualified personnel.

• Protect the joints from dirt and grease them regularly with light machine oil.

• Only use a dry and soft cloth for cleaning.
  Use caution when cleaning to avoid scratches. In case of heavy soiling, the clea-ning cloth can be slightly moistened with water.

• Do not use detergents or chemicals.

• Regularly check the tightness of product/screws.
  Fixing holes can remain visible when the product is removed. After prolonged use, a stain may remain on the underground.

• Store the product out the reach of children and in a dry and dust-protected ambience when not in use.

• Keep and use the original packaging for transport.

Disposal instructions

This product does not belong into the household waste. At the end of its working life, give it back to the manufacturer, the sales outlet or established for this pur-pose, public collection points for free. Details of disposal are regulated by the respective country‘s law. Recyclables are into the recycle circuit, in order to gain new raw materials. The following recyclable materials are collected in municipal collection: Waste glass, plastics, scrap metal, sheets and much more. With this type of scrap usage you are making an important contribution to protecting our environment.

Warranty

Detailed warranty conditions on www.mygoobay.com.

Symbols used

For indoor use only| IEC 60417- 5957|
---|---|---

REV2021-12-15
V1.0aw
Goobay®
by Wentronic GmbH
Pillmannstraße 12
38112 Braunschweig
Germany
Made in China
© by Wentronic Deutschland
Hotline: +49 (0180) 5005882
E-Mail: info@goobay.de
Web: www.wentronic.com/content/mygoobay/
(0.14 € / minute from German landline)

References

• goobay – Welcome page – Wentronic
• mygoobay – Wentronic

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>