MOEN 900-001 Flo Smart Water Monitor and Shutoff in 3-4-Inch Diameter Instructions
- June 9, 2024
- Moen
Table of Contents
MOEN 900-001 Flo Smart Water Monitor and Shutoff in 3-4-Inch Diameter
Model: 900-001
Product Information
Flo by Moen Smart Home Water Monitoring and Leak Detection System
The Flo by Moen Smart Home Water Monitoring and Leak Detection System (Model: 900-001) is an innovative product designed to detect water leaks and monitor water usage in your home. The system includes:
- Two 3/4 inch-NPT threaded brass tailpieces
- An AC adapter (12 VDC, 100-240VAC-50/60 Hz) with a 10′ cable
- Two spare o-rings
- An installation spacer
- A 5/16 hex key
The critical dimensions of the system are 66 mm and 150 mm. The water flow direction is indicated on the device, and a backup feature provides added protection in case of power outages. The Flo by Moen Smart Home Water Monitoring and Leak Detection System is compatible with most home plumbing systems and can be easily installed by following the instructions below.
Product Usage Instructions
- Turn off your home’s main water supply.
- Select a location for the Flo device that is near a power outlet and has easy access to your plumbing system.
- Attach the tailpieces to the device and connect them to your plumbing system’s hot and cold water lines.
- Insert the installation spacer between the device and the mounting surface to ensure proper spacing.
- Secure the device in place using screws or mounting tape (not included).
- Connect the AC adapter to the device and plug it into a nearby power outlet.
- Turn on your home’s main water supply and wait for the device to calibrate.
- Download the Flo by Moen app and follow the instructions to connect the device to your home’s Wi-Fi network.
- Use the app to monitor your home’s water usage and receive alerts if a leak is detected.
Note: The Flo by Moen Smart Home Water Monitoring and Leak Detection System should be tested regularly to ensure proper functioning. If you have any questions or concerns about the installation or use of this product, please consult the user manual or contact customer support for assistance.
DESCRIPTION
- Smart home water monitoring and leak detection system
OPERATION
- Remote, automatic, and manual water on/off (shut-off ) capability
- WiFi-enabled device for smartphone connectivity
- Smartphone app available for iOS and Android that provides the following:
- Proactive maintenance alerts (i.e. leak alert, pressure alerts, etc.)
- Remote water control and shut-off
- Set water consumption goals and monitor water usage
- Set system modes (home, away, sleep)
- See real-time flow, pressure, and temperature readings
- Run manual leak detection tests “Health Tests”
- Works with Amazon Alexa, Google Assistant, IFTTT and Control4
FLOW
- Maximum operating pressure of 175 psi
STANDARDS
- Third party certified to standard IAPMO IGC 349 and all applicable standards listed therein
- Third party certified to standards UL1951, CSA C22.2 no. 14 and no. 68 and all applicable standards listed therein
- Third party certified to standards NSF 61/9 and NSF 372 and all applicable standards listed therein
- Conformant to FCC part 15 Class C
- Conformant to Innovation, Science and Economic Development Canada (ISED) RSS-247
Installation Notes
- Install product following the installation guide
- Must be installed on accessible main water supply line (cold water line) that is 0.75 inch diameter (can be installed on 1.25 inch diameter or smaller)
- Must be installed after the water meter, water shut-off , and pressure regulating valve (if applicable)
- Power supply and device must not be installed where the ambient temperature can exceed 60 deg C or below 0 deg C
- Requires electrical outlet (100-240VAC-50/60 Hz) with continuous power within 6 feet of device
- Requires WiFI network (WLAN connectivity/IEEE 802.11bgn, 2.4 GHz range)
- Smartphone (iPhone or Android) with installed app required
For Well Pump System Installations
- When installed on well or irrigation water service lines, the device should be placed after (downstream) of all treatment and filtration components to avoid debris interference. It should also be installed after the well pump and water storage tank. If it is necessary to install the device prior to a water filtration system, a wye strainer with a 100 mesh or ner screen and blow-down port is required to catch any sediment or particles from the ground source or casing. The mesh screen in the strainer may require periodic maintenance.
CRITICAL DIMENSIONS
(DO NOT SCALE)
Included with product: 3/4″ inch-NPT threaded brass tailpieces (x2), AC adapter (12 VDC, 100-240VAC-50/60 Hz) with 10′ cable (x1), spare o-rings (x2), installation spacer (x1), 5/16″ hex key (x1)
Includes
01/04/2021 SPC15904 5000380487
Released 00