LEXON LL153 Softpower Magbank User Manual
- June 9, 2024
- LEXON
Table of Contents
- LEXON LL153 Softpower Magbank
- Product Information
- Product Usage Instructions
- Safety Precautions
- IN THE BOX
- PRODUCT OVERVIEW
- OPERATIONS & USE
- SAFETY PRECAUTIONS
- TECHNICAL SPECIFICATIONS
- DISPOSAL AND RECYCLING INFORMATION
- FCC
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
LEXON LL153 Softpower Magbank
Product Information
The Softpower MagBank is a wireless power bank that is designed by Alain Berteau. It comes with a Magsafe ring, wireless charging transmitter, Magsafe alignment magnet, USB Type-C In/Out port, and battery level LEDs indicator. The wireless charging function is activated by pressing the power button, and the current battery level shows on the LED indicators. It has a charging efficiency of 5W and is compatible with all Qi-enabled phones. However, it is not compatible with non-MagSafe protective cases. The device meets the essential requirements and other relevant provisions of Directives 2014/53/EU & 2011/65/EU and complies with Canadian ICES-003.
Product Usage Instructions
- Remove the Softpower MagBank, USB Type-C cable, and User manual from the box.
- Attach the Softpower MagBank to the back of your iPhone by aligning it with the Magsafe ring.
- Press the power button to activate the wireless charging function.
- Align the center of your mobile device with the power bank at the wireless charging area. If the charging icon/indicator doesn’t show on your mobile device, try to adjust its position.
- The current battery level shows on the LED indicators.
- No need to press the power on/off button to start charging your device.
- To remove the power bank, gently pull it off the back of your iPhone.
Note: For optimal charging experience, use a power supply (not included) with Type-C 5V-2.4A input. Do not use non-MagSafe protective cases with Softpower MagBank.
Safety Precautions
- Read all the instructions before using the device.
- Do not expose the device to liquid or moisture.
- Do not expose the device to extreme temperatures or heat.
- Do not use the device if the cable or plug is damaged.
- Do not disassemble the device.
- Do not insert metal objects into the device.
- Keep your device dry. Never place your device in water to avoid causing internal short-circuit, overheating, fire, deformation, or even explosion of the battery.
- Do not store your device in very hot or cold areas. It is recommended to use your device at room temperature.
- Do not expose your device to direct sunlight for an extended period of time.
- Keep your device out of reach of small children to prevent danger.
- Do not put metal objects or magnets between the mobile device and the wireless charging surface.
- Please stop using your device immediately if it bulges, leaks, or smells, and contact the Manufacturer for service.
- Do not attempt to service, repair or disassemble the device by yourself
Thank you for purchasing Softpower MagBank.
Please read this user manual carefully before operating your device and save
it for future reference.
IN THE BOX
- 1x Softpower MagBank
- 1x USB Type-C cable
- 1x User manual
PRODUCT OVERVIEW
- MagSafe ring
- Wireless charging transmitter
- MagSafe alignment magnet
- Wireless charging LED indicator
- USB Type-C In/Out port
- Battery level LEDs indicator
- Power On/Off
OPERATIONS & USE
Charging the powerbank
- Connect the supplied USB Type-C Cable into the powerbank port
- Plug the other end to a USB charger
Status | LED 1 | LED 2 ~ 5 |
---|---|---|
Charging | Off | The highest-level LED, flashing white; the LEDs under levels, |
solid white
Full charged| Off| Solid white
LED information
- LED 1: Wireless Charging LED (Blue)
- LED 2: 25% Battery Level LED (White)
- LED 3 : 50% Battery Level LED (White)
- LED 4: 7 5% Battery Level LED (White)
- LED 5: 1 00% Battery Level LED (White)
Charging your iPhones 12/13 and greater
- Press the power button to activate the wireless charging function.
- Place the power bank on the back of your iPhone.
Note: Your power bank will magnetically attach to your Phone.
To remove the power bank, gently pull it off the back of your iPhone.
Charging other Qi-enabled phones
Soft power Magbank is compatible with all Qi-enabled phones.
- Press the power button to activate the wireless charging function.
- Align the center of your mobile device with the power bank at the wireless charging area. If the charging icon/indicator doesn’t show on your mobile device, try to adjust its position.
Status | LED 1 | LED 2 ~ 5 |
---|---|---|
Wireless Charging activated | Flashing blue twice then Off | Showing the current |
battery level
Wireless charging| Solid Blue| Showing the current battery level
Fully charged| Off| Off
Foreign object detected| Flashing blue| Showing the current battery level
Charging other devices with a charging cable
- Directly plug the cable into the Type-C port of the powerbank.
- Connect the other end to the device.
No need to press the power on/off button to start charging your device.
Status | LED 1 | LED 2 ~ 5 |
---|---|---|
Charging | Off | Showing the current battery level |
Fully charged | Off | Off |
SAFETY PRECAUTIONS
Read all the instructions before using the device:
- Keep your device dry. Never place your device in water to avoid causing internal short-circuit, over-heating, fire, deformation, or even explosion of the battery.
- Do not store your device in very hot or cold areas. It is recommended to use your device at room temperatures.
- Do not expose your device to direct sunlight for an extended period of time.
- Keep your device out of reach of small children to prevent danger.
- Do not put metal objects or magnets between the mobile device and the wireless charging surface.
- Please stop using your device immediately if it bulges, leaks, or smells, and contact the Manufacturer for service.
- Do not attempt to service, repair or disassemble the device by yourself
TECHNICAL SPECIFICATIONS
- Dimensions: 3.54 x .37x 0.39″ / 9 x 6.2 x 1.2 cm
- Battery type: Li-polymer
- Material: Synthetic leather
- Battery capacity: 3000 mAh
- Weight: 0.22 lb / 100 g
- Battery voltage: 3.7V
- Charging system: via USB Type-C cable (included),
- Working frequency: 110-205KHz
- power supply (not included) Coil : 1 coil
- Input: Type-C 5V-2.4A
- Charging time: 2h
- Output: Type-C 5V-2.4A
- Operating temperature: 0° – 30°C
- Wireless power: 5W
- International warranty: 1 year
- Wireless charging compatibility: Compatible with all Qi-enabled phones Softpower Magbank is charging efficiency depends on whether the phone supports it. Feel free to check our compatibility list on our website: lexon-design.com
- MagSafe compatibility: iPhone 13 / iPhone 13 Pro / iPhone 13 Pro Max / iPhone 13 Mini, iPhone 12 / iPhone 12 Pro / iPhone 12 Pro Max / iPhone 12 Mini and greater Not compatible with non-MagSafe protective cases
EUROPEAN UNION CE DIRECTIVE
- LEXON hereby declares that the device complies with the essential requirements and other relevant provisions of Directives 2014/53/EU & 2011/65/EU.
- The original EU declaration of conformity may be found at: https://www.lexon-design.com/assets/certifications-ce-softpowermagbank.pdf
Radiated H-Field | -2.92 dBuA/m (@10m) |
---|---|
TX/RX Frequency Range | 110-148kHz(Only for EU&UK) |
UK conformity assessment
- The object described above is in conformity with the relevant Union harmonization legislation.
- The original UK declaration of conformity may be found at: https://www.lexon-design.com/assets/certifications-ce-softpowermagbank.pdf
DISPOSAL AND RECYCLING INFORMATION
- After the implementation of the European Directive 2012/19/EU in the national legal system, the following applies : electrical and electronic devices may not be dis-posed of with domestic waste. Consumers are obliged by law to return electrical and electronic device at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilizing old devices, you are making an important contribution to protecting our environment.
FCC
USA – FCC STATEMENT
- This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Notice:
- Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
FCC RF exposure statement:
- The device has been evaluated to meet the general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
CANADIAN COMPLIANCE STATEMENT
- This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:
- This device may not cause interference, and
This device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
RF exposure statements
- This device complies with the ISEDRSS-102 RF exposure requirement set forth for an uncontrolled environment and are safe for intended operation as described in this manual.
- LEXON
- 125, Avenue des Champs-Ēlysées – 75008 Paris – FRANCE
- All brands or product names are or may be trademarks of their respective owners. Pictures and specifications are not contractual. Assembled in China.
- lexon-design.com
- @lexondesign
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>