SuperLightingLED V3 RGB LED Strip Controller Set User Guide
- June 9, 2024
- SuperLightingLED
Table of Contents
Super Lighting LED V3 RGB LED Strip Controller Set User Guide
The RGB LED controller set is a versatile and efficient product designed to control and optimize the lighting effects of your LED strips. It comes with a multifunctional RF remote that allows you to achieve millions of colors and lighting effects, including static and dynamic modes.
Features
- Mini style controller with 3 channel constant voltage output.
- Smooth dimming and switch without any flickering.
- Built-in 10 dynamic modes, including jump or gradual change styles.
- Adopts 2.4GHz wireless technology, remote distance up to 30m.
- Auto-transmitting function, one receiver can transmit the signal from the remote to another receiver within 15m, so the remote control distance can be beyond 100m.
- Auto-synchronization function, different receivers can work synchronously when they are controlled by the same remote, under the same dynamic mode and same speed.
- Works with a power repeater to expand output unlimitedly.
Technical Parameters
LED Remote
- Output signal: RF(2.4GHz)
- Working voltage : 3VDC(CR2032)
- Standby time: 2 years
- Remote distance: 30m
- Size: L107×W58.5×H9mm
LED Receiver
- Input voltage: 12-24VDC
- Output power: 12V, Max 144W 24V, Max 288W
- Output current: 3CH, 4A/CH
- Size: L97×W33×H18mm
Dimension
Remote function
Mode+/-: Short press switch dynamic mode built in controller , long press
2s Mode+ run mode cycle, long press 2s Mode- run the first mode.
Speed+/-: Adjust dynamic mode speed, short press 10 levels, long press 2s
get the fastest / slowest speed.
Bright+/-: Adjust brightness, short press 10 levels, long press 1-5s for
continuous 256 levels adjustment.
R/G/B+/-: Adjust R/G/B brightness respectively, short press 10 levels,
long press 1-5s for continuous 256 levels adjustment.
White: Adjust white color, short press turn on/off white(RGB mix), long
press 1-5s for continuous 256 levels saturation adjustment.
Scene: Two scene memory, short press recall the scene long press 2s ,
save current color into the scene.
Match guide
Use Match key
- Match: Short press match key of the receiver, then press on/off key of the remote within 5s.
- Delete: Long press match key of the receiver for 5s, delete all matched remote.
Use Power-up
- Match: Switch off the power, then switch on power again, short press on/off key 3 times on the remote quickly within 5s after power on, the link is done once the light blinks 3 times.
- Delete: Switch off the power, then switch on power again, short press on/off key 5 times on the remote quickly within 5s after power on, the unlink is done once the light blinks 5 times.
Wiring diagram
Dynamic mode list
Malfunctions analysis & troubleshooting
Safety information
- The product shall be installed and serviced by a qualified person.
- This product is non-waterproof. Please avoid the sun and rain.
- Good heat dissipation will prolong the working life of the controller, please ensure good ventilation.
- Please check if the output voltage of any power supplies used comply with the working voltage of the product.
- Ensure all wire connections and polarities are correct and secure before applying power to avoid any damages to the LED lights.
- If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>