ROBUS REXS212-23 Surface Aluminium Extrusion Instructions
- June 9, 2024
- ROBUS
Table of Contents
ROBUS REXS212-23 Surface Aluminium Extrusion
INTRODUCTION
SURFACE ALUMINIUM EXTRUSION 21MM DEEP 20.5MM INNER WIDTH 2M LONG
REXS212-23
PLEASE READ INSTRUCTIONS BEFORE COMMENCING INSTALLATION AND RETAIN FOR
FUTURE REFERENCE. Electrical products can cause death or injury, or damage to
property. The Installation must be carried out by a qualified electrician.
Note:
The luminaire must be disconnected before carrying out any insulation
resistance testing. Product technical information and specification may change
over time without prior notification. For the latest technical information
please visit our web site www.robus.com or
robusdirect.com
Suitable for mounting on a normally flammable surface.
Installation
- Ensure mains supply is switched off before commencing work.
- Choose desired location to mount the extrusion, ensure that the cables are long enough to reach the start of the strip.
- Remove diffuser. Place LED strip inside aluminium channel and remove self-adhesive film, press the strip into the channel, ensure it is secure. Attach diffuser and end cap, ensure they are correctly attached.
- Mark appropriate fixing points for the brackets on the surface, ensure that the hole does not impinge on joists, pipe work, cables or other building services.
- Attach the brackets to the surface using screws provided.
- Attach the unit to the brackets.
Information for the Product user:
- Please note the requirement to dispose of Waste Electrical & Electronic Equipment separately from household waste (WEEE marked with crossed out wheelie bin symbol).
- Please consider your role in contributing to re-use and recycling by returning this product at end of life to a collection centre for waste electrical equipment or a Civic Amenity site, or to a retail outlet from which you are purchasing a replacement.
- This equipment may contain substances that are hazardous to health and the environment if disposed of carelessly. It is important that it is separated from normal household waste and recycled in the WEEE chain
- The crossed out wheelie bin symbol on a product indicates this equipment must not be disposed of in normal household waste, but should be disposed of according to local WEEE regulations The Installation must be carried out by a qualified electrician
L.E.D lighting & Electrical Distribution Group Ltd
IRE: Nangor Road, Dublin 12, D12 E7VP, Ireland UK: Bracknell Enterprise &
Innovation Hub, Ocean House, 12th Floor, The Ring, Bracknell, Berkshire RG12
1AX, UK
- Tel: +353 1 7099000
- Fax: +353 1 7099060
- Email: info@robus.com
- Website: www.robus.com
LED Group Australia Pty Limited Suite B, 2 Pittwin Road Capalaba Queensland 4157 Australia
References
- robusdirect
- ROBUS: Home to Best-in-Class LED Lighting and Customisation - Robus
- ROBUS: Home to Best-in-Class LED Lighting and Customisation | ROBUS
- ROBUS: Home to Best-in-Class LED Lighting and Customisation | ROBUS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>