ROBUS REXR212-23 LED Flexi Strip Instructions

: June 9, 2024
: ROBUS

Table of Contents

REXR212-23 LED Flexi Strip
Installation
Information for the Product user:
Documents / Resources

RECESSED ALUMINIUM EXTRUSION
21.7MM DEEP 20.4MM INNER WIDTH 2M LONG
REXR212-23

REXR212-23 LED Flexi Strip

PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCES.
! Electrical products can cause death or injury, or damage to property.
The Installation must be carried out by a qualified electrician.
Note:
The luminaire must be disconnected before carrying out any insulation resistance testing. Product technical information and specification may change over time without prior notification. For the latest technical information please visit our web site www.robus.com or robusdirect.com
Suitable for mounting on a normally flammable surface.

Installation

Ensure mains supply is switched off before commencing work.
Choose desired location to mount the extrusion, ensure that the cables are long enough to reach the start of the strip.
Note: Not suitable for vertical mounting.
Remove diffuser. Place LED strip inside the aluminium channel and remove self-adhesive film, press the strip into the channel, ensure it is secure. Attach diffuser and end cap, ensure they are correctly attached.
Mark appropriate fixing points for the brackets on the surface, ensure that the hole does not impinge on joists, pipe work, cables or other building services.
Attach the brackets to the surface using screws provided.
Attach the unit to the brackets.
Note: Leave the appropriate dark slot according to the dimension of Aluminium extrusion as per fig1.

Information for the Product user:

Please note the requirement to dispose of Waste Electrical & Electronic Equipment separately from household waste (WEEE marked with crossed out wheelie bin symbol).
Please consider your role in contributing to re-use and recycling by returning this product at end of life to a collection centre for waste electrical equipment or a Civic Amenity site, or to a retail outlet from which you are purchasing a replacement.
This equipment may contain substances that are hazardous to health and the environment if disposed of carelessly. It is important that it is separated from normal household waste and recycled in the WEEE chain
The “crossed out wheelie bin symbol” on a product indicates this equipment must not be disposed of in normal household waste, but should be disposed of according to local WEEE regulations The Installation must be carried out by a qualified electrician

L.E.D lighting & Electrical Distribution Group Ltd
IRE: Nangor Road, Dublin 12, D12 E7VP, Ireland
UK: Bracknell Enterprise & Innovation Hub, Ocean
House, 12th Floor, The Ring, Bracknell,
Berkshire RG12 1AX, UK

Tel: +353 1 7099000
Fax: +353 1 7099060
Email: info@robus.com
Website: www.robus.com
LED Group Australia Pty Limited
Suite B, 2 Pittwin Road Capalaba Queensland 4157 Australia
Tel: 07 3890 5444
Fax: 07 3890 4777
Email: purchases@robus.com
Website: www.robus.com.au
LED Group
Crowe Horwath
72 Trafalgar Street
NELSON 7010
New Zealand
Tel: +64 3668 5285
Email: nz_purchases@robus.com
Website: www.robusled.co.nz