900-001 Flo by Moen Smart Home Water Monitoring and Leak Detection System User Manual
- June 9, 2024
- Moen
Table of Contents
Flo by Moen™
Smart Home Water Monitoring
and Leak Detection System
Model: 900-001
Specifications
DESCRIPTION
- Smart home water monitoring and leak detection system
OPERATION
- Remote, automatic, and manual water on/off (shut-off ) capability
- WiFi enabled device for smartphone connectivity
- Smartphone app available for iOS and Android that provides the following:
- Proactive maintenance alerts (i.e. leak alert, pressure alerts, etc.)
- Remote water control and shut-off
- Set water consumption goals and monitor water usage
- Set system modes (home, away, sleep)
- See real-time flow, pressure, and temperature readings
- Run manual leak detection tests “Health Tests”
- Works with Amazon Alexa, Google Assistant, IFTTT and Control4
FLOW
- Maximum operating pressure of 175 psi
STANDARDS
- Third party certified to standard IAPMO IGC 349 and all applicable standards listed therein
- Third party certified to standards UL1951, CSA C22.2 no. 14 and no. 68 and all applicable standards listed therein
- Third party certified to standards NSF 61/9 and NSF 372 and all applicable standards listed therein
- Conformant to FCC part 15 Class C
- Conformant to Innovation, Science and Economic Development Canada (ISED) RSS-247
WARRANTY
- Flo Technologies warrants that the product will be free from defects in materials and workmanship for a period of one (1) year from the date of delivery following the original retail purchase
- Extended product warranty available through FloProtect plan
Visit www.support.meetflo.com for complete details and limitations
Installation Notes:
- Install product following the installation guide
- Must be installed on accessible main water supply line (cold water line) that is 0.75 inch diameter (can be installed on 1.25 inch diameter or smaller)
- Must be installed after water meter, water shut-off, and pressure regulating valve (if applicable)
- Power supply and device must not be installed where the ambient temperature can exceed 140 deg F (60 deg C) or below 32 deg F (0 deg C)
- Requires electrical outlet (100-240VAC-50/60 Hz) with continuous power within 6 feet of device
- Requires WiFI network (WLAN connectivity/IEEE 802.11bgn, 2.4 GHz range)
- Smartphone (iPhone or Android) with installed app required to receive alarm notifications
- An alternate means for controlling the plumbing supply should be installed upstream of this device.
Device Restrictions:
- This device is prohibited to be used with on piping circuits that branch to supply residential fire sprinklers downstream of this device.
- This device is prohibited for use in hazardous locations as defined by the National Electric Code, NFPA 70.
For Well Pump System Installations:
- When installed on well or irrigation water service lines, the device should be placed after (downstream) of all treatment and filtration components to avoid debris interference. It should also be installed after the well pump and water storage tank. If it is necessary to install the device prior to a water filtration system, a wye strainer with a 100 mesh or finer screen and blow-down port is required to catch any sediment or particles from the ground source or casing. The mesh screen in the strainer may require periodic maintenance.
CRITICAL
DIMENSIONS
(DO NOT SCALE)
Included with product: 3/4″ inch-NPT threaded brass tailpieces (x2),
AC adapter (12 VDC, 100-240VAC-50/60 Hz) with 10′ cable (x1),
spare o-rings (x2), installation spacer (x1), 5/16″ hex key (x1)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>