Conrad 2614698 Universal Wall Mount Game Controller Holder with Headset Hanger User Manual
- June 9, 2024
- CONRAD
Table of Contents
Conrad 2614698 Universal Wall Mount Game Controller Holder with Headset
Hanger
Overview
Intended use The product is a wall mount for game controllers. Do not use the product for other purposes. The product is intended for indoor use only. Do not use it outdoors. The product complies with the statutory national and European requirements. For safety and approval purposes, you must not rebuild and/or modify the product. Read the installation instructions carefully and store them in a safe place. Make this product available to third parties only together with the installation instructions. All company names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
- Product
- Installation instructions
- Mounting material
Latest product information
Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.
Description of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
The symbol warns of dangerous voltage that can lead to personal injury by electric shock.
Safety instructions
Read the installation instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling in this manual, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/ guarantee.
General information
- The device is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
Handling
- Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
- Always lay cables so that nobody can trip over or become entangled in them. This poses a risk of injury.
- Do not overload the product. Observe maximum payload information.
Mounting
- Unsuitable installation surfaces can cause the product to fall down and result in serious personal injury. Select an installation surface that can permanently withstand the combined weight of the product and the load.
- Select installation materials that are suitable for the installation surface and that can withstand the forces created by the leveraging effect, the weight of the product and the load.
When
penetrating the surface (for example: drilling or inserting fasteners), make
sure no cables or pipes are damaged. Inadvertently penetrating electric cables
causes the life-threatening danger of an electric shock! Check for concealed
wires and pipes before drilling or inserting fasteners.
Technical data
- Max. payload 5 kg
- Dimensions (W x H x D) 64 x 265 x 110 mm
- Weight 87 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represents the technical status at the time of printing.
Mounting
- Step 1 Install the shown components.
- Step 2 Mark drill holes.
- Step 3 Drill holes. Install wall plugs.
- Step 4 Fix holder.
- Step 5 Install attachments.