Ksix BXBULB6011 Smart Bulb SmartLED User Manual

: June 9, 2024
: KSIX

Table of Contents

Ksix BXBULB6011 Smart Bulb SmartLED
Technical information
Box contents
INSTALLATION AND Download app
Electronic and electrical devices disposal
CE Declaration of Conformity
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Ksix BXBULB6011 Smart Bulb SmartLED

Technical information

Base: E27
Type: A60
Power: 9W
Equivalent: 60W
Luminous flux: 806 lm
Colour: RGB + CCT (Warm White + Cool White)
Temperature: 3000K–6500K
Lifespan: 15,000h
Beam angle: 220º
CRI: RA80
Voltage: 220-240V/50-60hz
Connection: Bluetooth + WiFi
Voice Assistant: Amazon Echo and Google Home
App: TuyaSmart and Smart Life

Box contents

1 x Bulb
1 x User manual

INSTALLATION AND Download app

Download the app

To download the app, scan the QR code.
You can also search the app in the App Store or Google Play.

Register

If you don’t have an account in the App, sign up and then sign in with the verification code.
Enter your email and click on “Get verification code”. Enter the verification code you will receive in your email.
Set the password and press “Finished” to complete registration.

Add your device

First, turn on the Bluetooth and WiFi of your phone.
Open the app and tap “Add Device” or “+” in the top right corner.
Select your smart device from the list of devices or use automatic scanning to find it directly.
Turn on the device and wait until it flashes, this way you are confirming and selecting the type of flashing.
If the device does not flash, restart it by following the steps detailed in the App: with the device turned off, switch on, then switch off, switch on, switch off and switch on again and the light will flash. In order for this process to be work, it should be done in less than 10 seconds. Confirm and select the type of flashing.
Next, select the 2.4 GHz WiFi network, enter the router password and wait while the app finds the device. Once it has been added, tap “Finished”.

Note

To ensure a correct synchronization with your mobile, it is necessary to accept all the accesses requested by the app.
To connect for the first time, it is necessary to be connected to a Wifi network. Make sure that the light flashes quickly and that the WiFi password you entered is correct.
(The connection process may take several minutes, please be patient).
After the first connection, you can use a new WiFi or mobile data network to control the device at any time and from any location.
Only compatible with 2.4 GHZ WLAN, Android 4.1 and above and IOS 8.1 and above. Do not use 5G WiFi.
The first connection should be made close to the router to ensure a faster connection.
When connecting multiple devices to the WiFi network, do not put them too close together as this may cause signal interference.

Control your device

After successful configuration, the device will be displayed on the “Devices” page. Tap on the device icon to control its operation.

Selection of whites

Go to the first tab on the main screen and tap on “White”. From here, you can select the CCT white light you are looking for. Simply move your finger around the colour circle.
You can also adjust the brightness from 1 to 100% using the bar at the bottom of the screen.
From the bottom of the App you can set the operating time slots, turn the lights on and off and many more options.
You will also be able to configure the synchronisation with your circadian rhythm.
Circadian rhythms are all the physical and mental changes that respond to the light and darkness present during the course of a day. Synchronising your lighting with your
biorhythms can help improve your quality of life, reduce stress and increase productivity.

Rhythms

To configure them, go to the bottom of the screen where the power button is located.
Then click on the button to the right.
Then click on “Rythms” to access the settings screen.
By activating the “Rythms” option, you can manually adjust the lighting for each time of the day. Slide your finger across the circle to modify the time set for each moment of the day. To adjust the brightness and temperature, slide up the bottom tab and click on each of the icons representing them.

Planner

Sleep

Go to the “Plan” screen and click on the “Add to” button. Click on “Sleep plan” to access the settings screen. From there, you can set the time to turn off the light and the days of the week on which this action will be repeated.
Slide your finger across the bar to change the duration of the light switch-off. The intensity of the light will decrease until it switches off completely at the desired time.
By activating the “Customize” option you can choose the type of light and customise the colour, saturation and brightness.

Wake up

From the same menu you can adjust the switch-on time by clicking on “Wake up plan”.
By sliding your finger on the “Fade-in” bar, you can change the duration of the light switch-on time, which will help you to wake up in a natural way by gradually increasing
the intensity of the light.
From the “Last Time” bar, you can set the time when the light bulb switches off.
By activating the “Customize” option you can choose the type of light and customize the color, saturation and brightness.

Holidays (“Random timing”)

From the same menu you can access the “Random timing” function that allows you to program the switch-on and switch-off time of the bulb simulating your presence.
By activating the “Customize” option, you can choose the type of light and customise the colour, saturation and brightness.

Cycle Timing

You can also set operating time ranges for the bulb to switch on or switch-off automatically from the “Cycle timing” option. You can set the switch on and switch-off
duration from the “Opening time” and “Closing time” options.
By activating the “Customize” option you can choose the type of light and customize the colour, saturation, and brightness

Colour selection

Click on the “Colour” tab to choose from millions of options offered by the App. Simply drag your ﬁnger to ﬁnd the colour you are looking for.
You can adjust the intensity and brightness using the two bars located below the colour circle.

Scene modes

To activate scene modes, you will need to tap on the “Scene” tab on the home screen, located at the top of the screen.
From here, you can choose between the different static and dynamic scene modes provided by the App or create your own by tapping on the “Edit” tab in the upper right corner.
You can also program scene modes and set a plan by tapping on the different buttons at the bottom.

Synchronization with music

To get the light to follow the rhythm of the music in the room, you will need to tap on the “Music Sync” section.
Accept all the accesses requested by the App to allow the light to follow the rhythm of the music by combining different lights, colours and effects.

Voice Assistants

To set up your voice assistants through the app, you will need to tap on the top right corner and then tap on the “Edit” icon.
From here you can permit access to third parties to control the bulb, such as Alexa and Google Home.
You can adjust the brightness, change the colour, or simply turn the light on and off with just a few words.

Device settings

The App also allows you to conﬁgure other features of the bulb.
To manage these other features, you will need to access the upper right corner and tap on the “Edit” icon.

More about the App

You can adjust the different functions from the menu button at the top right corner of the App.

The device name can be changed as desired.
Device information.
Tap-to-Run and Automation allows you to check the Intelligent Automation to which your device is linked.
Supported third-party control provides information on how to connect your device with Amazon Alexa, Google Assistant.
Disconnection notice: allows you to alert yourself when your device is offline.
Create “Group” to control another smart device at the same time.
FAQ & Feedback allows users to report issues and obtain assistance.
Add to Home Screen allows you to add the smart device to your smartphone’s home screen.
Check the network of the device to check the status of the network connection.
Firmware information allows you to check the software or install updates on the device.
Restore factory settings: Allows you to reset the factory settings of the smart device.

Maintenance recommendations

Regularly clean the product with a dry cloth.
The product must be disconnected or switched off when cleaned.
Keep the connectors and/ or ports free from dust, lint, etc. to prevent improper connections.
Avoid breaking the device. Do not put objects over it or bend it too strong.
If the product includes a cable do not bend it too strong and do not pull from it to unplug the product.
Do not wet the product.
Keep it always in a dry place, away from humidity.
When not using the product, store it in a place free from dust, dirt, lint, liquids, etc.
If water enters the product interior, unplug it immediately from any attached power source or device it is connected to.
Avoid dropping or hitting the product. That might damage it.
Do not use the product for anything other than its intended use.
Please recycle the product in accordance with local environmental laws and regulations.

Safety information
Please read the following instructions before using the device for the ﬁrst time:

When you use device keep it away from heat sources (ﬁre) and from humidity sources (water and other liquids).
Do not use the product if it is wet or damaged.
Do not use the product with wet hands.
Do not leave the product in contact with ﬂammable materials.
Do not expose the product to high temperatures (for example: inside a car during hot weather).
Do not throw the product into ﬁre.
Keep the product away from children.
Disconnect or switch off the product if you are not going to use it for a long period of time.
Do not use the product if you perceive any visible defects.
Do not attempt to open or puncture the product. You might damage it.
Do not use the product with incompatible devices.
Do not disassemble or modify the product. These actions will invalidate the Warranty.

Legal Note
Hereby, Atlantis Internacional S.L. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EC. The features and functions described in this manual are based on tests made by Atlantis Internacional S.L. It is the user’s responsibility to examine and verify the product after its purchase. Atlantis Internacional S.L. is not responsible and will never be liable for any personal loss or injury, economical loss, material loss or any damage due to misuse, abuse or improper installation of the product. Atlantis Internacional S.L. is not responsible and will never be liable for any function, communication and connection failure between the product and Bluetooth enabled devices.

Electronic and electrical devices disposal

This symbol indicates that electrical and electronic equipment is to be collected separately.

This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
If the equipment uses batteries, they must be removed from the equipment and disposed in an appropriate collection center. If the batteries cannot be removed, do not attempt to do it yourself since it must be done by a qualiﬁed professional.
Separate collection and recycling helps conserve natural resources and prevent negative consequences for human health and the environment that might result from incorrect disposal.
The ﬁnal price of this product includes the cost necessary for the correct environmental management of the generated waste.
For more information, contact the retailer or the local authorities in charge of waste management.

Warranty: The 3-year warranty does not apply to products with consumable parts or parts subject to wear, except for defects in materials or manufacturing.

CE Declaration of Conformity

We hereby declare that the product (s) listed below satisﬁes the provision for CE-marking according to the following European directive(s):
EN 62560:2012+A1:2015 +A11:2019
EN 50663:2017
EN 62479:2010
EN 301 489-1 V2.2.3(2019-11)
EN 301 489-17 V3.2.4(2020-09)
EN IEC 55015:2019+A11:2020
EN 61547:2009
EN IEC 61000-3-2:2019+A1:2021
EN 61000-3-3:2013+A1:2019+A2:2021
EN 300 328 V2.2.2 (2019-07)

Article: BXBULB6011
EAN: 8427542125862
Features: 220-240V, 50/60Hz

Manufacturer:
ATLANTIS INTERNACIONAL, S.L.
Address:
Carrer del Crom, 53, 08907 L’Hospitalet de Llobregat, Barcelona (Spain)
Place and date of the declaration:
L’Hospitalet de Llobregat, September, 1st 2022