LS XEC-DP32/64H Programmable Logic Controller Installation Guide

: June 9, 2024
: LS

Table of Contents

LS XEC-DP32/64H Programmable Logic Controller
Safety Precautions
- Meaning of warning and caution inscription
Operating Environment
Performance specifications
Parts name and Dimension (mm)
Applicable Support Software
Accessories and Cable Specifications
- Check the accessory (Order the cable if need)
Installing / Removing Modules
Wiring
Warranty
LS ELECTRIC Co., Ltd
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LS XEC-DP32/64H Programmable Logic Controller

LS XEC-DP32-64H-Programmable-Logic-Controller-PRODUCT

This installation guide provides simple function information of PLC control. Please carefully read this data sheet and manuals before using products. Especially read safety precautions and handle the products properly.

Safety Precautions

Meaning of warning and caution inscription

WARNING: indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION: indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.

WARNING

Do not contact the terminals while the power is applied.
Protect the product from being gone into by foreign metallic matter.
Do not manipulate the battery (charge, disassemble, hitting, short, soldering)

CAUTION

Be sure to check the rated voltage and terminal arrangement before wiring
When wiring, tighten the screw of terminal block with the specified torque range
Do not install the flammable things on surroundings
Do not use the PLC in the environment of direct vibration
Except expert service staff, Do not disassemble or fix or modify the product
Use the PLC in an environment that meets the general specifications contained in this datasheet.
Be sure that external load does not exceed the rating of output product.
When disposing of PLC and battery, treat it as industrial waste.

Operating Environment

To install, observe the below conditions

No	Item	Specification	Standard
1	Ambient temp.	0 ~ 55℃	–
2	Storage temp.	-25 ~ 70℃	–
3	Ambient humidity	5 ~ 95%RH, non-condensing	–
4	Storage humidity	5 ~ 95%RH, non-condensing	–

5

|

Vibration Resistance

IEC 61131-2

5≤f<8.4㎐| –| 3.5mm|

10 times in each direction for

X, Y, Z

8.4≤f≤150㎐| 9.8㎨(1g)| –
Continuous vibration
Frequency| Frequency| Amplitude
5≤f<8.4㎐| –| 1.75mm
8.4≤f≤150㎐| 4.9㎨(0.5g)| –

Performance specifications

This is Performance specification of XGB. For more details, refer to related manual.

Item	Specification
Operation method	Reiterative operation, fixed cycle operation,

Interrupt operation, constant period scan

I/O control method| Scan synchronous batch processing (refresh method)

Direct method by instruction

Operation speed| Basic instruction: 0.83㎲/step
Program memory

capacity

| XBC:15Kstep, XEC: 200KB
Max expansion slot| Main + Expansion 10 Slot (expansion slot)
Operating mode| RUN, STOP, DEBUG
Self-diagnosis| Delay of operation, abnormal memory, abnormal I/O
Program port| USB(1Ch), RS-232C(1Ch)
Data keeping method at

power failure

| Setting latch(retain) area at basic parameter
Built-in function| Cnet (RS-232C, RS-485), PID, High speed counter, RTC

Parts name and Dimension (mm)

This is front part of the CPU. Refer to each name when driving the system. For more information, refer to user manual. LS XEC-DP32-64H-Programmable-Logic-
Controller-FIG-1

Built-in Communication Terminal block
Input terminal block
24V Output(Sub-power, Not applied to /DC power unit)
PADT Connect(USB, RS232)
O/S mode dip switch
Input status LED
Output status LED
O/S mode dip switch
Operation status LED
Power terminal block
Output terminal block

Dimension(mm)

Product	W	D	H
XB(E)C-DR(N)32H(/DC)	114	64	90
XB(E)C-DR(N)64H(/DC)	180	64	90

Applicable Support Software

For system configuration, the following version is necessary.

XG5000 Software: V3.61 or above

Accessories and Cable Specifications

Check the battery attached in the product

Rated Voltage/Current: DC 3.0V/220mAh
Warranty period: 3 year (at 25℃, Normal temperature)
Usage: Program/Data back-up, RTC driving when power-off
Specification: Manganese dioxide lithium (φ20 X 3.2mm)

Check the accessory (Order the cable if need)

PMC-310S: RS-232 connecting (download) cable.
USB-301A: USB connecting(download) cable.

Installing / Removing Modules

Here describes the method to installing removing product. LS XEC-DP32-64H-
Programmable-Logic-Controller-FIG-2

Installing module
liminate the Extension Cover at the product.
Push the product and connect it in alignment with Hook for Fixation of four edges and Hook for Connection at the bottom.
After connection, push down the Hook for Fixation and fix it completely.
Removing module
Push up the Hook For removing, and then installing the product with two hands. (Do not remove the product by force)

Wiring

Power wiring

In case that the power change is larger than the range of standard, connect constant voltage transformer
Connect the power having the small noise between cables or between earths. In case of having lots of noise, connect the isolating transformer or noise filter.
power for PLC, I/O device and other machines should be separate.
Use the dedicated earth if possible. In case of Earth works, use 3 class earth (earth resistance 100 Ω or less) and Use more than 2㎟ cable for earth. If the abnormal operation is found according to the earth, separate the earth

Warranty

Warranty period
- 18 months after the production date.
Scope of Warranty
- 18-month warranty is available except:

The troubles caused by improper condition, environment, or treatment except the instructions of LS ELECTRIC.
The troubles caused by external devices
The troubles caused by remodeling or repairing based on the user’s own discretion.
The troubles caused by improper usage of the product
The troubles caused by the reason which exceeded the expectation from science and technology level when LS ELECTRIC manufactured the product
The troubles caused by natural disaster

Change in specifications