dji Mavic 3 100W Battery Charging Hub User Guide

: October 30, 2023
: DJi

Table of Contents

Mavic 3 100W Battery Charging Hub
Introduction
Status LED Indicator Descriptions
Specifications
Intelligent Flight Battery
Disclaimer and Warning
DJI 65W Car Charger
**Compliance Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Battery Charging Hub (lOOW)
User Guide
v1 .0

Mavic 3 100W Battery Charging Hub

dji Mavic 3 100W Battery Charging Hub - Indicator

Status LED Indicator
Battery Port
Power Port

Disclaimer
Carefully read this entire document and all safe and lawful practices provided before use.
Warnings

The charging hub is only compatible with BWX260-500015.4 Intelligent Flight Batteries. DO NOT attempt to use the charging hub with other battery models.
Place the charging hub on a flat and stable surface when in use. Make sure the device is properly insulated to prevent fire hazards.
DO NOT attempt to touch the metal terminals on the charging hub.
Clean the metal terminals with a clean, dry cloth if there is any noticeable buildup.

Introduction

DJITM MAVIC™ 3 Battery Charging Hub (1 OOW) is designed for use with Mavic 3 Intelligent Flight Batteries. When used with a charger, it can charge up to three Intelligent Flight Batteries in sequence from high to low power level.
Usage

Insert the Intelligent Flight Battery into the battery port. Connect the charging hub to a power outlet (100-240 V, 50-60 Hz) using a charger.
The Intelligent Flight Battery with the highest power level will be charged first and then the rest will be charged in sequence according to their power levels. Refer to the Status LED Indicator Descriptions section for more information about the blinking patterns of the status LED indicator.
The Intelligent Flight Battery can be disconnected from the charging hub when charging is complete.

Status LED Indicator Descriptions

Blinking Pattern	Description
Solid yellow	No battery inserted
Pulses green	Charging
Solid green	All batteries fully charged
Blinks yellow	Temperature of batteries too low or too high (no further

operation needed)
Solid red| Power supply or battery error (remove and reinsert the batteries or unplug and plug in the power adapter)

Specifications

Model	CHX265-100
Compatible Power Adapter	DJI USB-C Power Adapter (1 OOW)

DJI 65W Portable Charger
Compatible Battery Model| BWX260-5000-15.4
Dimensions| 1 SOxSSx28 mm
Weight| 116 g
Operating Temperature| 5° to 40° C (41 ° to 104° F)
Input| 5-20 V, 5 A
DJI USB-C Power Adapter (1 OOW):
Charging Time (single battery)| Approx. 1 hour 10 minutes DJI 65W Portable Charger: Approx. 1 hour 36 minutes

Compliance Information

FCC Compliance Notice
Supplier’s Dec/aratJon of Conform1ry
Product name: DJI Mavle 3 Battery Charging Hub (1 OOW)
Model Number: CHX265-100
Responsible Party: OJI Technology. Inc.
Responsible Party Address: 201 S. Victory Blvd., Burbank, CA 91502
Website: www.dji.com
We, DJI Technology, Inc., being the responsible party, declares that the above mentioned model was tested to demonstrate complying with all applicable FCC rules and regulations.
This device complies with Part 1 S of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. and (2) This device must accept any ,nterference received, including interference that may cause undesired operation.
Any changes or mod1ficaaons not expressly approveq by the party responsible for compliance could void the user’s authority to operate the equipment.
CAN ICES-003 (B) / NMB-003(B)

EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device (DJI MAVIC 3 BATTERY CHARGING HUB (lOOW)) 1s in compliance with the essential requirements and other relevant provisions of the Directive 2014/30/EU.
A copy of the EU Declaration of Conformity 1s available online at www.dji.com/euro-compliance
EU contact address; DJI GmbH, lndustriestrasse 12. 97618. Niederlauer, Germany
GB Compliance Statement: SZ DJI TECHNOLOGY CO. LTD. hereby declares that this device (DJI MAVIC 3 BATTERY CHARGING HUB (100W)) is In compliance with the essential requirements and other relevant provisions of Electromagnetic Compatibility Regulations 2016.
A copy of the GB Declaration of Conformity is available online at www.dJi.com/euro-compliance
WE ARE HERE FOR YOU

Contact DJI SUPPORT

and MAVIC are trademarks of OJI.
Copyright (C) 2022 OJI All Rights Reserved.

MAVIC 3

Intelligent Flight Battery

Product Information
v1.0 2021 10

Disclaimer and Warning

Please read this entire document and all safe and lawful practices DJI™ provided carefully before use Failure to read and follow instructions and warnings may result in serious injury to yourself or others, damage to your DJI product. or damage to other objects in the vicinity. By using this product, you hereby signify that you have read this disclaimer and warning carefully and that you understand and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your own conduct while using this product, and for any consequences thereof. DJI accepts no liability for damage. injury or any legal responsibility incurred directly or indirectly from the use of this product.
This document and all other collateral documents are subject to change at the sole discretion of DJI
Introduction
Insert the Intelligent Flight Battery into the aircraft body or the compatible charging hub, then connect 11 to the charger for charging.
Usage
Visit https://www.dji.com/mavic 3 (User Manual / Safety Guidelines) to learn more about how to use this product

Specifications
Model. BWX260-5000-15.4
Capacity: 5000 mAh
Battery Type: LiPo 4S
Charging Temperature 5° to 40° C (41° to 104 F)
Max Charging Power 65 W
Please refer to http://www.dji.com/service for after sales service for your product where applicable.
DJI shall mean SZ DJI TECHNOLOGY CO LTD and/or its affiliated companies where applicable

Compliance Information
EU Compliance Statement SZ DJI TECHNOLOGY CO., LTD. hereby declares that this devioe(Uth1um Ion Polymer Rechargeable Battery) is in comprianoe with the essential requirements and other relevant provisions of the Directive 2006/66/ EC,2014/30/EU A copy of the EU Declaration of Conformity IS available online at www.dji.com/euro-compliance
EU contact address: DJI GmbH, lndustriestrasse 12, 97618, Nleder1auer. Gennany GB Compliance Statement SZ DJI TECHNOLOGY CO .. LTD. hereby declares that this device(Uthlum Ion Polymer Rechargeable Battery) is In compliance with the essential requirements and other relevant provisions of Electromagnetic Compatibility Regulations 2016.
A copy of the GB Declaration of Conformity ls available online at www.dji.com/euro-compliance.

DJI Support
http://www.dji.com

This content is subject to change.
Download the latest version from

www.dji.conm/mavic-3/downloads

DJI is a trademark of DJI
Copyright C 2021 DJI All Rights Reserved.

DJI 65W Car Charger

User Guide
v1.0 2021 10

DJI Support
http://www.dji.com

dji Mavic 3 100W Battery Charging Hub - Charger

Disclaimer and Warning
Carefully read this entire document and all safe and lawful practlC8S provided by DJI™ before using this product for the first tune. Failure to read and follow instructions and warnings may result in seriOUs injury to yourself or others, damage to your DJI product, or damage to other objaCts In the vicinity. By using this product, you hereby signify that you have read this document carefully and that you understand and agree to abide by all terms and conditions of this document and all relevant documents of this product. You agree that you are solely responsible for your own conduct while using this product and for any consequences thereof. DJI accepts no liability for damage, In1ury, or any legal responsibility incurred directly or 1nd1rectly from the use of th,s product.
DJI 1s a trademark of SZ DJI TECHNOLOGY CO,, LTD. (abbreviated as “DJI”) and its affiliated cornpan,es. Names of products, brands, etc,, appearing in this document are trademarks or registered trademarks of their respective owner companies. This product and document are copyrighted by DJI with all nghts reserved. No part of this product or document shall be reproduced 1n any form without the prior written consent or authonzation of DJI
This document and all other collateral documents are sub1ect to change at the sole dIscret1on of DJI.
This content is sut,iect to change w,thout prior notice. For up-to-date product information, visrt http://www.dji.com and click on the product page for this product.
Introduction
The DJI 65W Car Charger 1s used to charge the MAVIC ™ 3 Intelligent Flight Battery, remote controller, or mobile devices using a car power outlet.
Usage

Only use the car charger when the engine Is runn,ng Otherwise, the battery of the vehicle may not ha\18 the requ,red voltage for the engine to start.
If the car charger becomes loose and is reconnected dunng charg,ng, it may be necessary to rerno\18 and reinsert the lntelhgent Flight Battery to resume charging.
DO NOT touch the metal terrmnal after the car charger is unplugged.

Specifications

Model	CCX260-65
Charging Temperature	5° to 40° C (41° to 104′ F)
Input Voltage	12,7-16V ****6.5A
DC Output	USB-C: 5 V 5 A/9 V 5 A/ 12 V 5A/ 15 V 4.3 A/

20 V 3.25 A/ 5-20 V 3.25 A
USB-A: 5 V ****2 A
Charging Time·| Intelligent Flight Battery: Approx. 1 hour 36 minutes
DJI RC Pro: Approx, 1 hour 30 minutes (USB-C port)

Charging times were tested in a tab environment and should be taken as referencwe only.

**Compliance Information

**

FCC Compliance Statement: Supplier’s Declaration of Conformity.
Product name: Car Charger
Model Number: CCX260-65
Responsible Party, DJI Technology. Inc
Responsible Party Address: 201 S. Victory Blvd., Burbank,CA 91502
Website: www.dji.com
We, DJI Tachnology, inc., being the responsible party, declares that the above mentoned model was tested to demonstrate complying with all applicable FCC rules and regulations.
Ths device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interferance. and (2) this device must accept any interfarance recerved, including interference that may cause undesred operation. .
Any Changes or modifications not eaxpressiy approved by the party responsible for compliance could void the user’s authority to operate the equioment.
ISED Compliance
CAN ICES-003 (B)/NMB-003(B)

EU Compliance Statement: SZ DJI TECHNOLOGY CO.. LTD. hereby deciares that this device(Car Charger) 6 m compliance with the essential requirements and other relevant provsions of the Directive 2014/30/EU.
A copy of the EU Declaration of Conformity is avaliable online at www.dji.com/euro-compliance
EU contact address: DJI GmbH, industriestrasse 12, 97618, Niederiauer, Germany
GB Compliance Statement: SZ DJI TECHNOLOGY CO , LTD. hereby declares that this device (Car Charger) is in compliance with the essential requirements and other relevant provisions of Electromagnetic Compatibility Regulations 2016.
A copy of the GB Declaration of Conformity is avaiable online at www.dji.com/euro-compliance

Environmentally friendly disposal
**** Old electrical appliances must not be disposed of together with the residual waste, but nave to be disposed of separately. The disposal at the communal Collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little person effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.