nathan james 13603 Ariel Wall Light Instruction Manual
- June 17, 2024
- NATHAN JAMES
Table of Contents
nathan james 13603 Ariel Wall Light
Specifications
- Product: Ariel Wall Light
- SKU: 13603
- Assembly Time: 55 minutes
- Warranty: Free Lifetime Warranty
FAQ
- What should I do if I encounter defects in the wire insulation?
- If you notice any defects in the wire insulation, do not proceed with the installation. Contact our Customer Happiness team at help@nathanjames.com or call 1-866-619-1004 for assistance.
- Can I use power tools for assembly?
- Avoid using power tools for assembly. Please use hand tools to prevent damage to the product.
This should be easy, just follow our instructions and you will be back to Netflix in no time.
Estimated time for assembly
What you need
- Your favourite snack or energy bar (Save the bubbly for once your fixture is safely installed!)
- Use the packaging carton as a working surface to prevent product damage during assembly
- Phillips head screwdriver
- Drill
- Non-drywall = 1/4” Drill Bit
- Drywall = 5/16” Drill Bit
What’s included
|
Description
|
Qty
---|---|---
1| Shade| 1
2| Fixture| 1
3| Decorative Plate| 1
4| Canopy| 1
A| Screw M3.535mm| 3
B| Non-Dry Wall Anchors| 3
C| Dry Wall Anchors| 3
D| Screw M3.550mm| 3
E| Finial Nuts| 2
F| Allen Key| 1
G| Wrench| 1
H| Mounting Plate| 1
Scan me!
Free Lifetime Warranty
- Toll-free at 1-866-619-1004
- Help@nathanjames.com
- Nathanjames.com/help
Safety first, fun later
Safe use of this product starts with you.
- Use this light fixture responsibly with the primary concern for your safety. Follow assembly instructions carefully and inspect the product upon receipt and each use.
- Nathan James and its parent companies cannot be held legally responsible for any injuries or death resulting from failure to follow instructions or improper use of this product.
Proper use
- DO NOT use for commercial purposes
- DO NOT leave spilled liquid on the fixture
- DO NOT use light fixture if damaged
- DO NOT make temporary repairs
- DO NOT use outdoors
Do not modify the structure of this product in any way.
Our products have been tested to meet specific safety measures as they were originally intended to be sold. Any modifications will present the risk of creating significant safety issues which Nathan James will not be responsible for.
WARNING
Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not attempt installation. Please reach out to our Customer Happiness team at help@nathanjames.com or 1-866-619-1004
WARNING: RISK OF ELECTRIC SHOCK
Before starting the installation, disconnect the power by turning off the
circuit breaker or by removing the appropriate fuse at the fuse box. Turning
the power off at the switch is NOT SUFFICIENT to prevent electrical shock.
PLEASE CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS.
The goods
IMPORTANT
- Do not tighten bolts/screws completely until all bolts/screws are lined up and inserted into holes.
- Do not over-tighten screws and bolts to avoid stripping.
- Please use hand tools to assemble this product. Do not use power tools.
Pre-Installation
- Read all instructions before beginning assembly.
- To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
- Keep the receipt and these instructions for proof of purchase.
- Suggested Bulb: ST19 LED 60 Watt Equivalent | E26 Medium Base | Dimmable
- Fixture Max Wattage: 60W
Step 1
- Get ready for some exciting DIY action! Let’s start by separating the Mounting Plate (H) from Canopy (4) by unscrewing the Finial Nuts (E).
Step 2
- Next, place the Mounting Plate (H) in the desired location on your wall. Use the holes as a guide to mark where you will drill the holes for the wall anchors.
Step 3
- Using a drill + proper drill bit & the reference marks from Step 2, drill 3 holes into the wall.
IMPORTANT NOTE
- Non-drywall = 1/4” Drill Bit
- Drywall = 5/16” Drill Bit
Step 4
- Go ahead and tap the proper wall anchors into place in the new holes you just drilled. You may be able to push them into place with your thumb.
IMPORTANT NOTE
- Non-drywall Anchors = B
- Drywall Anchors = C
Step 5
- Mount the Mounting Plate (H) to the wall by screwing the proper screws, dependent on the wall type, into the wall anchors.
IMPORTANT NOTE
- Non-drywall Anchors = A
- Drywall Anchors = D
Step 6
- Halfway there! Remove hardware components from the back of the fixture (2).
Step 7
- Using the hardware components you just removed in Step 6, secure the Canopy to the Fixture with the Decorative Plate sandwiched between each component.
Step 8
- Insert the vertical fire tube into its respective housing on the Fixture.
Step 9
- Once the vertical fixture tube is properly aligned within its respective housing, secure it in place by tightening the set screw on the side of the housing.
Step 10
- Secure the Fixture to the Mounting Plate using the Finial Nuts.
- Then remove the shade collar by unscrewing it from the socket assembly.
Step 11
- Secure the shade in place by screwing the shade collar back into place, and sandwiching the shade between the shade collar and socket assembly.
Troubleshooting
| Problem | Possible Causes | Solutions |
|---|---|---|
| The bulb will not light. | The bulb is burned out. | Replace the light bulb. |
| The power is off. | Ensure the power supply is on. | |
| The circuit breaker is off. | Ensure the circuit breaker is in the ON position. | |
| The fuse blows or the circuit breaker blows when the light is turned on. | ||
| There is an exposed wire. | Discontinue the use of the light. |
Contact a qualified electrician or reach out to our Customer Happiness team at help@nathanjames.com or 1-866-619-1004.
Step 12
- Screw in your preferred light bulb. We recommend using 1 Type ST19 light bulb. 120V 60Hz Ac only.
Step 13
- Congrats! You’ve made it to the final step. Adjust the height of your shade by feeding more or less cord through the fixture.
Questions? Don’t worry, we’ve got the answers
- What other light bulbs can fit in this light?
- The bulb must not be greater than the max wattage for the fixture. It must match the base size, and the diameter of any area of the bulb should be less than diameter of any area of shade, so that it can fit.
- Can I use an LED light bulb?
- Yes, so long that the base size matches and the diameter of any area of bulb is less than diameter of any area of shade, so that it can fit.
- Is this UL/ETL certified?
- Yes, all our products are either UL or ETL.
- Do I need an electrician to set up the hardwire?
- We recommend using a certified electrician for all hardwiring, although all of our fixtures can be set up without an electrician, as long as you are replacing an existing fixture or have an existing junction box ready for a fixture installation. ENSURE POWER IS OFF WHEN INSTALLING. For all new constructions, please use a certified electrician.
- Can I retrofit this hard-wired to a plug-in or vice-versa?
- Yes, a plug-in fixture can be turned into a hardwire fixture and a hardwire fixture can become a plug-in fixture. For many products we will provide all the necessary hardware to make these changes, if not, you will need to purchase the necessary hardware.
- Is this light compatible outside North America?
- Our lighting is only warranted in Canada and the United States.
- What do I do if the product is not working?
- Try a different light bulb and confirm proper installation.
- Can these lights work on a dimmer?
- Dimmability is related to the light bulb and the wall switch, not the light fixture. All our hardwire fixtures are compatible with dimmable light bulbs. We recommend using a dimmer switch, as it extends the life of the bulb and allows for energy saving and great ambiance. If using a LED bulb, please ensure both your LED bulb and dimmer switch are compatible.
- Can I use the fixture outdoors?
- No, this product was not designed to be used outdoors.
No heartburn, when we handle the return
Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle.
We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.
We are only in business if you’re happy
For starters, thanks for being you.
- Toll-free at 1-866-619-1004
- Help@nathanjames.com
- NathanJames.com/help
We do our best to ensure your product arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free.
Warranty
This product comes with a lifetime warranty from the date of purchase. Please use your phone to scan the QR code to register your product or visit https://goo.gl/i9dk3q.
Did we do alright? Please spread the love!
If you are happy with your product, tell your friends and family about us or
even better leave us a review online. Spreading the word gives us the
opportunity to make more people happy and keep our prices low for your next
purchase.
CONTACT
- Toll-free at 1-866-619-1004
- Help@nathanjames.com.
- Nathanjames.com/help.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>