Etymotic Research ER2SE Studio Edition in-Ear Earphones User Manual

Etymotic Research ER2SE Studio Edition in-Ear Earphones

Specifications

• BRAND: Etymotic Research
• EAR PLACEMENT: In Ear
• COLOR: Black
• CONNECTIVITY TECHNOLOGY: Wired
• MODEL NAME: Etymotic Research ER2SE Studio Edition in-Ear Earphones Limited Edition with Compatible iPhone Adapter
• ADAPTER: 3. 5MM
• CONNECTIVITY TECHNOLOGY: Wired
• FREQUENCY RESPONSE: 20 Hz – 16kHz
• NOISE ISOLATION: 35 – 42 dB
• MAX OUTPUT (SPA): 120 dB
• PRODUCT DIMENSIONS: 7 x 2 x 4 inches
• ITEM WEIGHT: 7.7 ounces
• SPECIAL FEATURES: Noise Isolation

Introduction

With a Lightning to 3. 5MM adapter and a 12-piece extended tip selection, they are Limited Edition. They are Anodized-finish metal earphones. They have 35+ dB of isolation from outside noise. They have collection of ear tips for the ideal in-ear fit. They contain Detachable cables that make replacement simple. They have Wired Connectivity Electronics. Included Filter tool and replacement filters are the components.

HOW TO REMOVE ETYMOTIC CABLE

Hold the eartip in place for about 5 seconds as the foam in the eartip expands to form a tight seal. With a twisting motion, slowly remove the headphones to break the seal. To take out the earbuds, don’t tug on the cable.

HOW TO MAKE IEM SOUND BETTER

• Pay attention to your volume. In addition to endangering your ears, using your IEMs at high volumes might harm the drivers within your earphones.
• Use a shirt clip, store your IEMs securely, wick moisture away, and clean after each use.

HOW TO PUSH EARBUDS IN

Grab the left earlobe with your right hand and place it behind your left ear. To enlarge your ear canal, slightly pull the lobe downward. Then, gently press the tip even farther into your ear with your left index finger. However, only insert it far enough so you can feel the seal, not all the way.

HOW TO MAKE EARBUDS FIT

• To make it simpler to enter into your ear canal, slightly incline the eartip downward.
• The earbud should now be gently twisted to snugly fit within your ear.
• For the finest seal and snug fit, keep twisting the earbud into your ear canal.

HOW TO KNOW IF EARBUDS FIT RIGHT

You can try carefully inserting your fingers, starting with the smallest, inside your ears. As soon as you achieve a sound seal and outside noise is muffled, move to the following finger on each hand. Next, try to match that finger’s size to one of the available ear tip sizes.

Frequently Asked Questions

What measurement is my ear tip size?

Unroll the edge of an ear tip to examine its size, then look for the letters S, M, or L etched on the interior of the ear tip close to its base. To ensure that the AirPods are installed securely and pleasantly in your ears, try placing them in with the medium-sized ear tips.

High fidelity earplugs: What are they?

Musicians and artists are the target audience for high-fidelity earplugs. The sound quality is preserved, as opposed to conventional earplugs that can muffle and distort sound; the volume is simply reduced.

Do cables affect the sound of IEMs?

The varying cable core materials, variations in core counts, and a number of other factors have caused us to note that the sound of IEMs and headphones changes when the cable rolls. The output signal may become distorted or noisy as a result of a faulty wire.

IEM cables are they universal?

There isn’t a single, accepted standard for IEM connectors, so different brands essentially do things their own way. Therefore, if you intend to purchase aftermarket cables for your IEMs, first check sure they are compatible. Here is a brief tutorial to assist you in navigating.

Does cable matter when using IEMs?

And while we advise you to conduct online study on this subject, we are also confident in saying that when you have tested a few different cables with your own headphones or IEMs, you won’t need persuading. Indeed, wires can have a significant impact.

What do IEM headphones mean?

The greatest distinction is that IEMs (in-ear monitors), as their name implies, are inserted into the ear canal whereas earbuds merely rest on the outer ear.

What is IEM stand for?

Information relating to the establishment of industries is required to be filed and is referred to as IEM for industrial undertakings that are exempt from the Industrial Licensing requirements under THE INDUSTRIES (DEVELOPMENT AND REGULATION) ACT I (D&R),1951 (Industrial Entrepreneur Memorandum).

What causes the loudness of my in-ear monitors?

The condition of your headphone jack is crucial. The headphone jack might become clogged with grit, filth, or pocket lint, which can interfere with the audio transmission and distort or make the sound too muted. Simply remove any visible debris using a cotton bud or cloth dampened with rubbing alcohol.

Why keep falling out earbuds?

Your earbuds may occasionally just be slipping out because you’re wearing them incorrectly. Placing the wrong earbud on the wrong ear will probably result in the earphones falling off because most earbuds are made and molded precisely to fit either the left or the right ear.

My earbuds won’t stay in my ear; why?

Depending on how closely an earbud rests, the hinges in your jaw that allow you to chew and speak occasionally cause earbuds to fall out. This is the most frequent cause, and fortunately, it is also the simplest to resolve. Because everyone’s ears are unique, a universal earbud could not be comfortable for some users.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>