MGC QAS-2X8 Audio Amplifier Splitter User Manual
- June 9, 2024
- MGC
Table of Contents
MGC QAS-2X8 Audio Amplifier Splitter
Description
- For projects where control is mandatory, the QX-mini Splitter (QAS-2X8) adds eight independent and controllable audio channels to the QX-mini or QX-mini-BP.
- AS-2X8 QX-mini Amplifier Splitter provides eight fully supervised Class “a” (Style Z) or “B” (Style Y) speakers zones.
- Mounted to the main board, and connected to the ampli-fier, the QAS-2X8 allows the control of ON and OFF of each of the eight zones
- By connecting the QAS-2X8 to two different amplifiers, it is possible to have different audio playing in two different zones.
Features
- Provides eight fully supervised Class “a” (Style Z) or “B” (Style Y) speakers zones.
- Control ON and OFF of each of the eight zones.
- QAS-2X8 mounts on the main board.
- Can be connected to two different amplifiers.
- For indoor and dry environment use only.
- Compatible with QX-MINI, QX-MINI Booster Panel, AUDMAX, and AUDMAX Booster Panel.
Backup Amplifier
When there are 2 amplifiers (QAD-30) and 1 splitter (QAS-2X8) installed, one of the amplifiers can be configured as a backup amplifier. If the main amplifier fails, the backup amplifier takes over.
Zone Control
If connected to a Mircom fire panel, FleXNet, FX-2000, FX-3500 or FX-3318, and two amplifiers, it can send different messages to the Event Floor and Surrounding Floors.
Electical Ratings
Current Consumption:
Standby:| 23mA
Alarm:| 91mA
Backup Amplifier with QAS-2X8 Audio Amplifier Splitter
When there are 2 amplifiers installed, one of them can be configured as a
backup. If the main amplifier fails, the backup amplifier takes over.
Up to 8 Audio Outputs with 2 different audio messages per Panel with QAS- 2X8 Audio Amplifier Splitter
When connecting 2 amplifiers to the audio zone splitter in an application
where each amplifier plays a different audio message. For example, one
amplifier can provide an alarm signal to a zone, and the other amplifier can
provide an alert signal to the other zones. This configuration provides 8
outputs. The 8 outputs can select from amplifier 1, amplifier 2, or they can
be off.
Ordering Information
Canada
25 Interchange Way Vaughan, Ontario L4K 5W3 Telephone:
905-660-4655 Fax:
905-660-4113
U.S.A. 4575 Witmer Industrial Estates Niagara Falls, NY 14305
Toll Free : 888-660-4655
Fax Toll Free: 888-660-4113
THIS INFORMATION IS FOR MARKETING PURPOSES ONLY AND NOT INTENDED TO DESCRIBE
THE PRODUCTS TECHNICALLY.
For complete and accurate technical information relating to performance,
installation, testing and certification, refer to technical literature. This
document contains intellectual property of Mircom. The information is subject
to change by Mircom without notice. Mircom does not represent or warrant
correctness or completeness
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>