AXAGON EEM2-SB2 Superspeed USB C 10 Gbps Raw Box for NVMe and SATA M.2 SSD Instruction Manual
- June 9, 2024
- AXAGON
Table of Contents
AXAGON EEM2-SB2 Superspeed USB C 10 Gbps Raw Box for NVMe and SATA M.2 SSD
Instruction Manual
- Mount disk to the box.
- Turn on Computer.
- Pluc the box to the-JSB port of the computer.
- An automatic installation will be performed.
- No need to install any external drivers.
- The external disk is ready to use.
- In the Device manager, please check the successful installation. **(fig. A)
CHECK CORRECT INSTALLATION IN DEVICE MANAGER
Only devices which are added to the Device Manager when installing the case
and the hard drive are displayed.
**
- In the Disc manager, please initialize the new disk and format it. **(fig. B)
INSTIALIZE THE NEW DISK AND FORMAT IT IN DISK MANAGEMENT
**
The safest method for removing from he computer is the utilization of Safely Remove Hardware function in Windows operation system.
**SAFE DISCONNECTION OF EXTERNAL BOX
**
OPEN THE BOX
A Slide and remove the back cover.
B Pull out the inside slide.
INSERT THE NVMe OR STTA M.2 SSD DISK
FIX THE NVMe OR SATA M.2 SSD DISK
COMPLETE THE BOX
TECHNICAL SPECIFICATIONS
- INPUT INTERFACE
- USB-C
- USB3.2 Gen 2 • USB 3.2 Gen 1 (USB 3.0) • USB 2.0 10.000 • 5000 • 480 Mbit/s (SuperSpeed+ • SuperSpeed • High Speed)
- USB Type C female connector
SUPPORTED DEVICES
- NVMe (PCI-Express)
- SATA (AHCI)
- M.2 SSD single or double sided disks, no disk capacity limitation
- M.2 disk dimension support: 2242, 2260, 2280 mm
- M-KEY AND B+M-KEY M.2 SSD disks supported
- NGFF 75-pin M-key slot for M.2 disks
OTHER FEATURES
- Plug and Play & Hot Plug
- UASP • TRIM • SSD boot support
- The total bandwidth / transmission rate of the box is determined by the USB 3.2 Gen 2 interface used (theoreti-cally up to 10 Gbit/s).
- The real bandwidth / transmission rate of the box is about 1000 MB/s (1 GB/s)
- it is given by the limits of the USB 3.2 Gen 2 interface.
- Compliant with PCI Express Base Specification Revision 3.1a specification Compliant with NVM Express 1.3 specification
- Compliant with Serial ATA 3.1 specification (SATA/600)
- Compliant with USB Mass Storage Class specification
- Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later
- Supports BOT (Bulk-Only Transport) Sleep mode support — after 5 minutes of inactivity
- Aluminum body helps to cool the M.2 SSD.
- Higher box surface temperature is not a defect – thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment.
POWER SUPPLY
USB bus power power supply via USB 3.0 is fully sufficient in all cases.
LED INDICATION
Decent blue LED indicates USB connection and data transfer
OS SUPPORTED
- MS Windows 7 / 8.1 / 10 and later
- Windows Server 2008 / 2012 / 2016 and later
- 32- and 64-bit version supported
- Mac OS X 10.x and later
- Linux 2.6.x and later
- Android (OS and device support needed)
- Note: drivers are usually part of OS; when Windows 7 used it is necessary to check OS support and driver avail-ability with the M.2 SSD manufacturer.
TECHNICAL SUPPORT: More information, FAQs, manuals and drivers can be found on the product page in the PRODUCT SUPPORT tab at www.axagon.eu. Nothing helped? Write to our technical support: [email protected].
At the end of its service life, do not throw the product into household waste; take it to a collection point for electrical equipment recycling. For information about collection and recycling programmes in your country, contact your local authorities or the retailer who sold you the product.
EU declaration of conformity: The device complies with the harmonisation legislation of the European Union 2014/30/EU (EMC) and 2011/65/EU (RoHS). The complete EU declaration of conformity is available from the manufacturer.
Before using the product, the user is obliged to read the user instructions. The manufacturer disclaims any liability for damage that may occur due to improper use of the product or failure to follow the instructions contained herein. Product use other than specified must be consulted with the manufacturer.
Do not use the product in humid or explosive environments and near flammable substances.
PRODUCT SUPPORT LINK
http://axagon.eu/produkty/eem2-sbNsupportLinkGoal
© 2022 AXAGON
\Vyrobce / Manufacturer: RealQ s.ro, – Zelezné 5, 619 00 Brno, Czech Republic
neces Ree rage arene econ Raet ters Petra esse vas
All marks indicated here are the registered trademarks of their appropriate
owners.
Specifications are subject to change without prior notice. IVE iten NM cers
