LEXON LR154 MINUT Pocket Sized Alarm Clock User Manual

LEXON LR154 MINUT Pocket Sized Alarm Clock

Design by Manuela Simonelli & Andrea Quaglio

Please read this user manual carefully before operating your device and save it for furture reference.

IN THE BOX

• 1xMinut
• 1x USB Type-C cable
• 1x User manual

OVERVIEW

Device (A)

1. Touch surface to snooze alarm (Tap once), stop alarm (Double tap) or turn on display (Tap once)
2. Display
3. Alarm setting key
4. Time setting key
5. Brightness setting key
6. -/+ keys for Time, Alarm or Brightness adjustments
7. Power ON!OFF key
8. USB Type-C charging port

Display (B)

1. Time
2. Time setting mode
3. Alarm setting mode
4. Brightness mode
5. Battery indicator
6. AlarmON
7. AM/PM (12-h format)

CHARGING INSTRUCTIONS

We recommend you to fully charge the battery before using Mi nut for the first time:

1. Plug the provided USB Type-C cable into the charging port at the back of the device.
2. Plug the USB end of the cable into any powered-on computer or any 5V USB power adaptor (not included).
3. A charging icon will display on the LCD screen when charging. It takes about 3 hours to fully charge Minut.
   Note: When battery is low (device not plugged to a power source), the battery icon will keep flashing until the device power completely runs out

OPERATIONS & USE

Important note: Minut has a built-in battery that allows it to operate without being constantly plugged in. When not plugged in, the LED display automatically switches ON when you touch the top surface of the device. The LED backlight will be on for 5 seconds and then dim for 15 seconds before going into standby mode. Minut can be permanently plugged in with a 5V USB power adaptor. When plugged in, the LED display stays ON permanently

First Time setting

1. Press and hold the key for 3 seconcj§to tum 9N the device.
2. The time format display appears. Press: keys to select the time format (12h/24h) then press key to confirm.
3. The HOUR digit flashes, press keys to adjust the HOUR then press key to confirm. -· –
4. The MINUTES digit flashes, adjust the MINUTES then press: key to confirm.
   Night mode: only works when the alarmglock is plugged in.
   To disable/enable the night mode, press 1%) key once. When the night mode is enabled, the brightness icon remains on the screen. The alarm clock goes into night mode (black screen) from 10:00 pm to 8:00 am, allowing you to fall asleep more comfortably and creating a better sleeping environment.

Normal mode

1. Press and hold the key for 2 seconds to enter Time setting mode. The time format display appears. Press: to slect the time format (12h/24h) then press : key !9’_confirm.
2. The HOUR digit flashes, press· keys to adjust the HOUR then press : key to confirm.
3. The MINUTES digit flashes, Press: to adjust the MINUTES then press key to confirm.

Alarm setting

1. Press and hold the key for 2 seconds to enter AlanTJsetting mode. The HOUR digit flashes, press keys to adjust the HOUR then_ press key to confirm.

2.  The MINUTES digit flashes, Press: keys fo adjust the MINUTES then press key to confirm.
   If the user enters this setting and there is no operation after 10 seconds, the device gets back to the time display.

   • Stop the alarm (C): When the alarm sounds, touch the top surface of Minut twice or press any buttons.
   • Set the alarm volume:_E{om,t_l”le time interface, long press TO enter the alarm volume setting interface. Press ,to adjust the volume level then press /0′: button to confirm.
   • Snooze (D): When the a·larm sounds, gently touch the top surface of Minut once to snooze. The alarm will sound again after 6 mtnutes.
   • Check alarm time: Press the KEY once to see the alarm time at any time.
   • Disable alarm mode: Press the key once to see the alarm time. Press again to disable. When the alarm is OFF, the alarm icon on the right comer disappears.
     Repeat the procedure to enable again.

Brightness setting

1. Press and hold the key to enter Brightness setting mode. _
2. Press keys to adjust the brightness level then press: key to confirm.

Other operations

Backlight: At night, tap on the top surface to light up the screen
Low battery alert: When the battery level drops below 10%, the last battery bar starts to flash. Plug in the product to charge it. __
Reset mode: Press and hold,· keys until you hear a bip to reset the device.

SAFETY INFORMATION

All the safety and operating instructions should be read before the appliance is operated.

• Reta.in Instructions: The safety and operating instructions should be retained for future reference.
• Water and Moisture: The device should not be used near water
• Heat: The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances that produce heat.
• Power Sources: The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

PRODUCT SPECIFICATIONS

• Dimensions: 2.36 x 1.57 x 0.79″ / 6.5 x 4.5 x 2.5 cm
• Weight: 0.11 lb / 50 gr
• Material: ABS/Aluminium
• Battery capacity: 900 mAh
• Battery voltage: 3. 7V
• Charging time: 3 hours
• Charging system: Rechargeable on
• USB Type-C cable (cable included)
• Input: DCSV
• Frequency band: 1700-2700 Hz

Normal usage time: Up to 6 months (Battery life may vary depending on brightness & alarm setting, conditions of use and ambient temperature) International warranty: 1 year

EUROPEAN UNION

CE DIRECTIVE

LEXON hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the directives 2014/30/EU & 2011/65/EU.
The original EU declaration of conformity may be found at: https://www.lexon- design.com/assets/certifications-ce-minut.pdf
LEXON declare que cet appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes des directives 2014/30/EU & 2011/65/EU. UK conformity assessment  The object described above is in conformity with the relevant Union harmonization legislation. The original UK declaration of conformity may be found at:
https://www.lexon-design.com/assets/certifications-ukca-minut.pdf

DISPOSAL AND RECYCLING INFORMATION
After the implementation of the European Directive 2012/19/EU in the national legal system, the following applies : electrical and electronic devices may not be dis-posed of with domestic waste. Consumers are obliged by law to return electrical and electronic device at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilizing old devices, you are making an important contribution to protecting our environment.

USA· FCC STATEMENT

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Notice:
Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

CANADIAN COMPLIANCE STATEMENT
This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.
   This Class B digital apparatus complies with Canadian ICES-003.

____ LEXON” ___ _
125. Avenue des Champs-Elysees – 75008 Paris – FRANCE
All brands or product names are or may be trademarks or their respective owners.
Pictures and specifications are not contractual. Assembled in China.
lexon-design.com I @lexondesign

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>